Engineering Papers⌕ Search

Engineering topics

Curtis, Tony

Publications and source records attributed to Curtis, Tony.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experiences with Porting the FLASH Code to Ookami, an HPE Apollo 80 A64FX Platform

We present initial experiences with running the community simulation code FLASH, developed at the University of Chicago for multi-scale multi-physics applications, on Ookami, a technology testbed featuring the A64FX processor developed by Fujitsu. Our effort focused largely on running FLASH “right out of the box” to see which combinations of compilers and software implementations (e.g. MPI) allowed the code to run with minimal modification. FLASH was one application in a larger effort to deploy Ookami; it served as a test for different versions of newly installed software, and as a cornerstone for the FAQ page of the Ookami website. Here, we report on our results with different compilers and other software, along with our initial scaling results and attempts to utilize the A64FX’s SVE instructions and NUMA architecture. We found that FLASH readily ran with different compilers and MPI implementations, and showed the expected good scaling with no turning. However, more work must be done to fully take advantage of the A64FX’s architectural features and produce a significant speedup for FLASH on Ookami.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Kelvin Probe Force Microscopy for High-Resolution Imaging of Hydrogen in Steel and Aluminum Alloys

SRNL is working with Sandia NL, Pacific Northwest NL and Oak Ridge NL in the H-Mat consortium with the objective of developing materials with a higher resistance to hydrogen attack. Understanding the mechanism of hydrogen interactions in metal alloys is continually a topic of interest for applications which involve the long-term storage of hydrogen. Atomic hydrogen segregates to regions of extended defects, such as grain and phase boundaries, and can cause stress and premature cracking through a process known as hydrogen embrittlement. Advanced microstructural imaging techniques, with minimal sample preparation needs, that are capable of resolving hydrogen segregation at the nanometer scale is needed. Current imaging technologies to aid in understanding the effects of hydrogen in metals involve primarily fractography after mechanical testing. Hydrogen segregated at the surface and particularly at surface defect sites changes the local work function of the material. This can be measured by Kelvin Probe Force Microscopy, KPFM, a variant of atomic force microscopy (AFM). KPFM produces surface potential images and is capable of measuring the local change in work function of surfaces with very high spatial resolution. The spatial resolution of KPFM is optimally ~5 nm, yielding very high hydrogen concentration/microstructure coloration capabilities. By locating the presence of hydrogen and its relationship with extended defects, it may be possible to develop microstructures less susceptible to hydrogen embrittlement. The objective of this effort is to assess the utility of KPFM to determine the H 2 concentration profiles surrounding complex microstructural features in high strength steel and aluminum alloys subjected to high pressure hydrogen exposure.

08 HYDROGEN↗
DOE OSTI2019

Kelvin Probe Force Microscopy for High-Resolution Imaging of Hydrogen in Steel and Aluminum Alloys (Q3 Progress Report)

SRNL is working with Sandia NL, Pacific Northwest NL and Oak Ridge NL in the H-Mat consortium with the objective of developing materials with a higher resistance to hydrogen attack. Understanding the mechanism of hydrogen interactions in metal alloys is continually a topic of interest for applications which involve the long-term storage of hydrogen. Atomic hydrogen segregates to regions of extended defects, such as grain and phase boundaries, and can cause stress and premature cracking through a process known as hydrogen embrittlement. Advanced microstructural imaging techniques, with minimal sample preparation needs, that are capable of resolving hydrogen segregation at the nanometer scale is needed. Current imaging technologies to aid in understanding the effects of hydrogen in metals involve primarily fractography after mechanical testing. Hydrogen segregated at the surface and particularly at surface defect sites changes the local work function of the material. This can be measured by Kelvin Probe Force Microscopy, KPFM, a variant of atomic force microscopy (AFM). KPFM produces surface potential images and is capable of measuring the local change in work function of surfaces with very high spatial resolution. The spatial resolution of KPFM is optimally ~5 nm, yielding very high hydrogen concentration/microstructure coloration capabilities. By locating the presence of hydrogen and its relationship with extended defects, it may be possible to develop microstructures less susceptible to hydrogen embrittlement. The objective of this effort is to assess the utility of KPFM to determine the H 2 concentration profiles surrounding complex microstructural features in high strength steel and aluminum alloys subjected to high pressure hydrogen exposure.

08 HYDROGEN↗
DOE OSTI2018

Hoover

HOOVER is a distributed framework for solving streaming/dynamic graph problems where the structure of a graph changes over time based on the state of its vertices.

97 MATHEMATICS AND COMPUTING↗