The Solar Cruiser Mission: Demonstrating Large Solar Sails for Deep Space Missions
No abstract available
Space Weather↗
Engineering topics
Curran, Francis M.
Publications and source records attributed to Curran, Francis M..
Method and Apparatus for Pressure Pulse Arcjet Starting
The invention disclosed is directed to a method and apparatus for an arcjet starter. The invention discloses a method of moving an arc from the subsonic region of the thruster to the supersonic region by introducing a pressurized propellant into the casuty of the anode.
Sankovic, John M.↗
Method and Apparatus for Pressure Pulse Arcjet Starting
The invention disclosed is directed to a model and apparatus for an arcjet starter. The invention discloses a method of moving an arc from the subsonic region of the thruster to the supersonic region by introducing a pressurized propellant into the annular area of the anode.
Sandkovic, John M.↗
NASA spacecraft propulsion activities
The NASA's activities in the development of spacecraft propulsion systems are reviewed, with emphasis on program directions and recent progress made in this domain. The recent trends towards the use of smaller spacecraft and launch vehicles call for new onboard propulsion systems. The NASA's efforts are conducted within the framework of the onboard propulsion program. The research and development work carried out in relation to the different propulsion system technologies are considered: electromagnetic systems; electrostatic systems; electrothermal systems; bipropellant systems; and monopropellant systems.
Curran, Francis M.↗
Advanced Propulsion for Geostationary Orbit Insertion and North-South Station Keeping
Solar electric propulsion technology is currently being used for geostationary satellite station keeping. Analyses show that electric propulsion technologies can be used to obtain additional increases in payload mass by using them to perform part of the orbit transfer. Three electric propulsion technologies are examined at two power levels for geostationary insertion of an Atlas IIAS class spacecraft. The onboard chemical propulsion apogee engine fuel is reduced in this analysis to allow the use of electric propulsion. A numerical optimizer is used to determine the chemical burns that will minimize the electric propulsion transfer times. For a 1550-kg Atlas IIAS class payload, increases in net mass (geostationary satellite mass less wet propulsion system mass) of 150-800 kg are enabled by using electric propulsion for station keeping, advanced chemical engines for part of the transfer, and electric propulsion for the remainder of the transfer. Trip times are between one and four months.
Oleson, Steven R.↗
Method and apparatus for pressure pulse arcjet starting
The invention disclosed is directed to a method and apparatus for an arcjet starter. The invention discloses a method of moving an arc from the subsonic region of the thruster to the supersonic region by introducing a pressurized propellant into the casuty of the anode.
Sankovic, John M.↗
The NASA Electric Propulsion Program
Nearly all space missions require on-board propulsion systems and these systems typically have a major impact on spacecraft mass and cost. Electric propulsion systems offer major performance advantages over conventional chemical systems for many mission functions and the NASA Office of Space Access and Technology (OSAT) supports an extensive effort to develop the technology for high-performance, on-board electric propulsion system options to enhance and enable near- and far-term US space missions. This program includes research and development efforts on electrothermal, electrostatic, and electromagnetic propulsion system technologies to cover a wide range of potential applications. To maximize expectations of technology transfer, the program emphasizes strong interaction with the user community through a variety of cooperative and contracted approaches. This paper provides an overview of the OSAT electric propulsion program with an emphasis on recent progress and future directions.
Callahan, Lisa Wood↗
The BMDO Thruster-on-a-Pallet Program
The Ballistic Missile Defense Organization sponsors an aggressive program to develop and demonstrate electric propulsion and space power technologies for future missions. This program supports a focused effort to design, fabricate, and space qualify a Russian Hall thruster system-on-a-pallet ready to take advantage of a near-term flight opportunity. The Russian Hall Effect Thruster Technology (RHETT) program will demonstrate an integrated pallet design in late FY95. The program also includes a parallel effort to develop advanced Solar Concentrator Arrays with Refractive Linear Element Technology (SCARLET). This synergistic technology will be demonstrated in a flight experiment this summer on the Comet satellite. This paper provides an overview of the RHETT and SCARLET programs with an emphasis on electric propulsion, recent progress, and near-term program plans.
Caveny, Leonard H.↗
Advanced Propulsion for Geostationary Orbit Insertion and North-South Station Keeping
Solar electric propulsion (SEP) technology is currently being used for geostationary satellite station keeping to increase payload mass. Analyses show that advanced electric propulsion technologies can be used to obtain additional increases in payload mass by using these same technologies to perform part of the orbit transfer. In this work three electric propulsion technologies are examined at two power levels for an Atlas 2AS class spacecraft. The on-board chemical propulsion apogee engine fuel is reduced to allow the use of electric propulsion. A numerical optimizer is used to determine the chemical burns which will minimize the electric propulsion transfer time. Results show that for a 1550 kg Atlas 2AS class payload, increases in net mass (geostationary satellite mass less wet propulsion system mass) of 150 to 800 kg are possible using electric propulsion for station keeping, advanced chemical engines for part of the transfer, and electric propulsion for the remainder of the transfer. Trip times are between one and four months.
Oleson, Steven R.↗
Electric propulsion for geostationary orbit insertion
Solar electric propulsion (SEP) technology is already being used for geostationary satellite stationkeeping to increase payload mass. By using this same technology to perform part of the orbit transfer additional increases in payload mass can be achieved. Advanced chemical and N2H4 arcjet systems are used to increase the payload mass by performing stationkeeping and part of the orbit transfer. Four mission options are analyzed which show the impact of either sharing the orbit transfer between chemical and SEP systems or having either complete the transfer alone. Results show that for an Atlas 2AS payload increases in net mass (geostationary satellite mass less wet propulsion system mass) of up to 100 kg can be achieved using advanced chemical for the transfer and advanced N2H4 arcjets for stationkeeping. An additional 100 kg can be added using advanced N2H4 arcjets for part of a 40 day orbit transfer.
Oleson, Steven R.↗
A Low-Erosion Starting Technique for High-Performance Arcjets
The NASA arcjet program is currently sponsoring development of high specific impulse thrusters for next generation geosynchronous communications satellites (2 kW-class) and low-power arcjets for power limited spacecraft (approx. 0.5 kW-class). Performance goals in both of these efforts will require up to 1000 starts at propellant mass flow rates significantly below those used in state-of-the-art arcjet thruster systems (i.e., high specific power levels). Reductions in mass flow rate can lead to damaging modes of operation, particularly at thruster ignition. During the starting sequence, the gas dynamic force due to low propellant flow is often insufficient to rapidly push the arc anode attachment to its steady-state position in the diverging section of the nozzle. This paper describes the development and demonstration of a technique which provides for non-damaging starts at low steady-state flow rates. The technique employs a brief propellant pressure pulse at ignition to increase gas dynamic forces during the critical ignition/transition phase of operation. Starting characteristics obtained using both pressure-pulsed and conventional starting techniques were compared across a wide range of propellant flow rates. The pressure-pulsed starting technique provided reliable starts at mass flow rates down to 21 mg/s, typically required for 700 s specific impulse level operation of 2 kW thrusters. Following the comparison, a 600 start test was performed across a wide flow rate range. Post-test inspection showed minimal erosion of critical arcjet anode/nozzle surfaces.
Sankovic, John M.↗
Small Satellite Propulsion Options
Advanced chemical and low power electric propulsion offer attractive options for small satellite propulsion. Applications include orbit raising, orbit maintenance, attitude control, repositioning, and deorbit of both Earth-space and planetary spacecraft. Potential propulsion technologies for these functions include high pressure Ir/Re bipropellant engines, very low power arcjets, Hall thrusters, and pulsed plasma thrusters, all of which have been shown to operate in manners consistent with currently planned small satellites. Mission analyses show that insertion of advanced propulsion technologies enables and/or greatly enhances many planned small satellite missions. Examples of commercial, DoD, and NASA missions are provided to illustrate the potential benefits of using advanced propulsion options on small satellites.
Myers, Roger M.↗
Electric propulsion - An evolutionary technology
Explore the source record for details and available documents.
Curran, Francis M.↗
The NASA Electric Propulsion Program
NASA has defined and undertaken an evolutionary technology program for high performance electric propulsion systems, which could greatly affect the logistics weight requirements for such large space structures as Space Station Freedom. Attention is presently given to the development status of hydrazine and high power arcjets, resistojets, the characterization of rocket flows and plumes, electrostatic and electromagnetic propulsion systems, and development programs aimed at the determination of opportune technology-insertion activities.
Curran, Francis M.↗
BMDO electric space-propulsion program
Electric propulsion (EP) applications being considered include: orbit insertion, orbit repositioning, station keeping, and elusive maneuvering. Typically, 1 to 5 kW are available for EP. A class of thrusters, the Hall-effect thrusters, is extensively researched, developed and flown by Russia. These thrusters, using xenon propellant, perform reliably, e.g., at 1.35 kW, 600 s specific impulse, 50 percent efficiency and greater than 2000 hr life. This specific impulse and efficiency combination is superior to the present arcjets for several Ballistic Missile Defense Organization (BMDO) applications. Three versions of the Hall thrusters are part of the experimental evaluation. Since today's goals are within reach of available thrusters and power sources, emphasis is being placed on such topics as: thruster lifetime, spacecraft interactions, electromagnetic interference, and erosion product deposition. Facilities in U.S. laboratories are being specially configured to achieve these goals.
Caveny, Leonard H.↗
Electric propulsion: An evolutionary technology
The NASA Lewis Research Center (LeRC) conducts and directs an electric propulsion research and technology program aimed at providing high-performance electric propulsion system options for a broad range of near and far-term missions. This evolutionary program emphasizes the development of propulsion systems for three classes of missions: (1) near term auxiliary propulsion applications such as North-South Stationkeeping for next generation communications satellites and orbit maintainence for orbiting platforms such as Space Station Freedom; (2) advanced solar electric propulsion and SP-100-class nuclear electric propulsion for Earth-space orbit transfer and robotic planetary missions; and (3) very high power systems to support major space missions including the Space Exploration Initiative. To cover widely disparate mission requirements, the LeRC program includes research on electrothermal, electrostatic, and electromagnetic systems. This paper provides an overview of the LeRC program with a focus on recent progress.
Curran, Francis M.↗
Development of arcjet and ion propulsion for spacecraft stationkeeping
Near term flight applications of arcjet and ion thruster satellite station-keeping systems as well as development activities in Europe, Japan, and the United States are reviewed. At least two arcjet and three ion propulsion flights are scheduled during the 1992 - 1995 period. Ground demonstration technology programs are focusing on the development of kW-class hydrazine and ammonia arcjets and xenon ion thrusters. Recent work at NASA Lewis Research Center on electric thruster and system integration technologies relating to satellite stationkeeping and repositioning will also be summarized.
Sovey, James S.↗
Development of arcjet and ion propulsion for spacecraft stationkeeping
Near term flight applications of arc jet and ion thruster satellite station-keeping systems as well as development activities in Europe, Japan, and the United States are reviewed. At least two arc jet and three ion propulsion flights are scheduled during the 1992-1995 period. Ground demonstration technology programs are focusing on the development of kW-class hydrazine and ammonia arc jets and xenon ion thrusters. Recent work at NASA LeRC on electric thruster and system integration technologies relating to satellite station keeping and repositioning will also be summarized.
Sovey, James S.↗