Engineering Papers⌕ Search

Engineering topics

Cui, Yi

Publications and source records attributed to Cui, Yi.

At least 541 records · Page 30

A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage

Large-scale energy storage represents a key challenge for renewable energy and new systems with low cost, high energy density and long cycle life are desired. In this article, we develop a new lithium/polysulfide (Li/PS) semi-liquid battery for large-scale energy storage, with lithium polysulfide (Li{sub 2}S{sub 8}) in ether solvent as a catholyte and metallic lithium as an anode. Unlike previous work on Li/S batteries with discharge products such as solid state Li{sub 2}S{sub 2} and Li{sub 2}S, the catholyte is designed to cycle only in the range between sulfur and Li{sub 2}S{sub 4}. Consequently all detrimental effects due to the formation and volume expansion of solid Li{sub 2}S{sub 2}/Li{sub 2}S are avoided. This novel strategy results in excellent cycle life and compatibility with flow battery design. The proof-of-concept Li/PS battery could reach a high energy density of 170 W h kg{sup -1} and 190 W h L{sup -1} for large scale storage at the solubility limit, while keeping the advantages of hybrid flow batteries. We demonstrated that, with a 5 M Li{sub 2}S{sub 8} catholyte, energy densities of 97 W h kg{sup -1} and 108 W h L{sup -1} can be achieved. As the lithium surface is well passivated by LiNO{sub 3} additive in ether solvent, internal shuttle effect is largely eliminated and thus excellent performance over 2000 cycles is achieved with a constant capacity of 200 mA h g{sup -1}. This new system can operate without the expensive ion-selective membrane, and it is attractive for large-scale energy storage.

25 ENERGY STORAGE↗

Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder

Rechargeable lithium-sulfur batteries have attracted great interest in recent years because of their high theoretical specific energy, which is several times that of current lithium-ion batteries. Compared to sulfur, fully-lithiated Li{sub 2}S represents a more attractive cathode material because it enables pairing with safer, lithium metal-free anodes. Here, we demonstrate stable and high-performance Li{sub 2}S cathodes by using ab initio simulations to guide our rational selection of poly(vinylpyrrolidone) binder which exhibits strong affinity with both Li{sub 2}S and lithium polysulfides. A high discharge capacity of 760 mA h g{sup -1} of Li{sub 2}S (~ 1090 mA h g{sup -1} of S) was achieved at 0.2 C with stable cycling over prolonged 500 charge/discharge cycles.

25 ENERGY STORAGE↗

Studying The Kinetics Of Crystalline Silicon Nanoparticle Lithiation With In-Situ Transmission Electron Microscopy

Silicon is an attractive high-capacity anode material for Li-ion batteries, but a comprehensive understanding of the massive ~300% volume change and fracture during lithiation/delithiation is necessary to reliably employ Si anodes. Here, in-situ transmission electron microscopy (TEM) of the lithiation of crystalline Si nanoparticles reveals that the reaction slows down as it progresses into the particle interior. Analysis suggests that this behavior is due to the influence of mechanical stress at the reaction front on the driving force for the reaction. These experiments give insight into the factors controlling the kinetics of this unique reaction.

Environmental Molecular Sciences Laboratory↗

Substrate comprising a nanometer-scale projection array

A method for forming a substrate comprising nanometer-scale pillars or cones that project from the surface of the substrate is disclosed. The method enables control over physical characteristics of the projections including diameter, sidewall angle, and tip shape. The method further enables control over the arrangement of the projections including characteristics such as center-to-center spacing and separation distance.

47 OTHER INSTRUMENTATION↗

A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes

Silicon is regarded as one of the most promising anode materials for next generation lithium-ion batteries. For use in practical applications, a Si electrode must have high capacity, long cycle life, high efficiency, and the fabrication must be industrially scalable. Here, we design and fabricate a yolk-shell structure to meet all these needs. The fabrication is carried out without special equipment and mostly at room temperature. Commercially available Si nanoparticles are completely sealed inside conformal, thin, self-supporting carbon shells, with rationally designed void space in between the particles and the shell. Finally, the well-defined void space allows the Si particles to expand freely without breaking the outer carbon shell, therefore stabilizing the solid-electrolyte interphase on the shell surface. High capacity (~2800 mAh/g at C/10), long cycle life (1000 cycles with 74% capacity retention), and high Coulombic efficiency (99.84%) have been realized in this yolk-shell structured Si electrode.

25 ENERGY STORAGE↗

The Effect of Metallic Coatings and Crystallinity on the Volume Expansion of Silicon during Electrochemical Lithiation and Delithiation

Applying surface coatings to alloying anodes for Li-ion batteries can improve rate capability and cycle life, but it is unclear how this second phase affects mechanical deformation during electrochemical reaction. Here, in-situ transmission electron microscopy is employed to investigate the electrochemical lithiation and delithiation of silicon nanowires (NWs) with copper coatings. When copper is coated on one sidewall, the NW bilayer structure bends due to length changes in the silicon during delithiation. Tensile hoop stress causes conformal copper coatings to fracture during lithiation without undergoing bending deformation. In addition, in-situ and ex-situ observations indicate that a copper coating plays a role in suppressing volume expansion during lithiation. Finally, the deformation characteristics and dimensional changes of amorphous, polycrystalline, and single-crystalline silicon are compared and related to observed electrochemical behavior. This study reveals important aspects of the deformation process of silicon anodes, and the results suggest that metallic coatings can be used to improve rate behavior and to manage or direct volume expansion in optimized silicon anode frameworks.

Energy↗

Final Report for Department of Energy/EERE (for public release)

Developing CIGS solar cells calls for the understanding of materials and processing in order to translate the record small efficiency to module and the strategy to produce thin cells for materials and processing saving. This project has exploited nanostructuring of CIG solar cells, including nanowires and nanotextured substrates. We showed that nanowires function as well-defined CIGS-CdS p-n junction for understanding the chemical fluctuation, defect formation interface and grain boundary behaviors and the effect of ion diffusion, which are important but complicated issues for solar cell fabrication. We have also demonstrated effective nanoscale photon management on nanotextured substrate to provide opportunity for thin CIGS solar cells. We also developed the scalable methods for producing such nanotextured substrates. The research output in this project helps advancing the CIGS solar cells and broadly other solar cell technologies in cost reduction per unit power.

14 SOLAR ENERGY↗

Compressional Behavior of Bulk and Nanorod LiMn[subscript 2]O[subscript 4] under Nonhydrostatic Stress

We studied the effect of pressure on LiMn{sub 2}O{sub 4} commercial powders and well-characterized nanorods using angle-dispersive synchrotron X-ray diffraction (XRD) in diamond anvil cells and found that spinel LiMn{sub 2}O{sub 4} is extremely sensitive to deviatoric stress induced by external applied pressure. Under nonhydrostatic conditions, bulk LiMn{sub 2}O{sub 4} underwent an irreversible phase transformation at pressures as low as 0.4 GPa from a cubic Fd-3m to tetragonal I4{sub 1}/amd structure driven by the Jahn-Teller effect. In contrast, bulk LiMn{sub 2}O{sub 4} under hydrostatic conditions experienced a reversible structural transformation beginning at approximately 11 GPa. Well-characterized LiMn{sub 2}O{sub 4} nanorods with an average diameter of 100-150 nm and an average length of 1-2 {micro}m were investigated under the same experimental conditions and showed a similar structural behavior as the bulk material confirming that LiMn{sub 2}O{sub 4} displays an extremely sensitive structural response to deviatoric stress. Scanning electron microscope (SEM) images of the samples especially the nanorods that were recovered from high pressure demonstrated a link between the changing morphology of the materials and the origin of the phase transition. We also found that nanostructured materials can accommodate more stress compared to their bulk counterparts. Our comparative study of bulk and nanorod LiMn{sub 2}O{sub 4} improves our understanding of their fundamental structural and mechanical properties, which can provide guidance for applied battery technology. In addition, LiMn{sub 2}O{sub 4} represents a strongly correlated system, whose structural, electronic, and magnetic properties at high pressure are of broad interest for fundamental chemistry and condensed matter physics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗