Engineering Papers⌕ Search

Engineering topics

Cruz, M. I.

Publications and source records attributed to Cruz, M. I..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Mars sample return missions, precursors to manned planetary exploration

Technologies and concepts applicable to eventual manned exploration of Mars, as demonstrated by the Mars Sample Return Mission, are presented. These include aerocapturing at Mars; safe and accurate descent and landing effectively using aerobraking and propulsion; launch and ascent from the Martian surface; rendezvous and docking with an orbiting return vehicle; and a safe return to earth. Critical mission elements are expected to function independently of either earth or astronaut control to ensure human safety. The Mars Rover Sample Return Mission includes such elements as autonomous functions in this unmanned mission. Based on the analyses performed and the concepts investigated, it is suggested that robotic missions are feasible for late 1990s without any major technology development being required.

Stager, D. N.↗
NASA NTRS1983

Aerocapture and aeroassisted orbital transfer - A high performance leverage space technology

Single pass aerocapture and aeroassisted orbital transfer designs are discussed for modifying spacecraft orbits using planetary atmospheres. Aerodynamic drag can be used to shift a hyperbolic flyby trajectory to a planetary orbit by having the spacecraft altering its in-plane L/D ratio to maintain constant drag until the desired velocity is attained. The spacecraft would then move out of the atmosphere, sometimes with a small propulsive assist. Sample missions to Uranus, Jupiter, and Titan are mentioned, with mission scenarios commencing with a Shuttle launch. Biconic-shaped spacecraft are cited as having the best L/D for insertion accuracy, a low hypersonic ballistic coefficient, and volumeric efficiency. Aeroassisted orbital transfer involves atmospheric braking in order to shed velocity on a return trip from higher orbits. No decision has yet been made as to the spacecraft shape, but calculations indicate that aeroassist braking before return to LEO for rendezvous with the Shuttle has the potential for the lowest cost/mass to GEO of any delivery system currently under consideration.

Cruz, M. I.↗
NASA NTRS1983

Optimization and closed loop guidance of drag modulated aeroassisted orbital transfer

An analysis of optimal and near optimal atmospheric flight trajectories for drag modulated aeroassisted orbital transfer is presented. An explicit and adaptive closed loop guidance approach for this mode of orbit transfer is also presented with performance near the optimal nominal trajectories. The orbital transfer of interest is for return from high earth orbit to low earth orbit. Most of what is discussed in this paper concerns the aeroassisted or atmospheric segment which lowers the apogee of the high earth orbit to the apogee of the low earth orbit. Minimization of the total impulsive delta-V at this low earth orbit apogee is the optimization criterion. Control about this impulse due to a number of potential error sources in atmospheric braking is the requirement imposed on closed loop guidance.

Kechichian, J. A.↗
NASA NTRS1982

System design concepts and requirements for aeroassisted orbital transfer vehicles

The Orbital Transfer Vehicle (OTV) is an advanced upper stage concept which will deliver spacecraft from operating systems at Low Earth Orbit (LEO) such as Space Shuttle, Earth-To-Orbit (ETO) vehicles, and Space Operations Center (SOC), to High Earth Orbit (HEO) and planetary excursions. The OTV will be driven by the need to achieve significant reductions in the operational costs for delivering payloads to Geostationary Equatorial Orbit (GEO). Aeroassist is a technological capability that has a potential for OTV's ranging from mission enhancing (reusable OTV for payload delivery) to mission enabling (manned GEO and some DOD). It is shown that the use of aeroassist for OTV's is a high leverage technology which can potentially reduce space transportation costs and enable a number of highly desirable missions.

Austin, R. E.↗
NASA NTRS1982

Aerocapture - Guidance, navigation, and control

Aerocapture is a concept for inserting a spacecraft into orbit about a target planet. The energy required for orbit insertion is obtained from natural resources present at or near the target body, thereby reducing the amount of propellant which must be carried onboard. Specifically, the transfer from a hyperbolic flyby trajectory to a desired bound orbit is effected by aerodynamic lift and drag forces acting on the spacecraft during controlled flight through the atmosphere of either the target planet or a nearby satellite. A survey is provided of the trajectory guidance, navigation, and control aspects of aerocapture, and a summary is given of the results of a number of preliminary studies concerning certain of these aspects. The investigation has additional significance in connection with the current interest in aeroassisted orbital transfer vehicles, which may be used in conjunction with the Space Shuttle.

Mease, K. D.↗
NASA NTRS1981

Aerodynamic mission concepts for the Mars sample return mission

Future plans for the continued exploration of Mars call for a sample return mission. This plan proposes bringing a distributed, selected sample of Mars material from several locales on Mars back to earth. The mission options studied to date utilize an extensive number of aerodynamic concepts not previously planned in past planetary exploration programs. These include various modes of orbit modification using atmospheric braking, aeromaneuvering to effect precision surface landing, very low ballistic entry for a network of surface penetrators, low flying hydrazine powered airplanes, balloons, ascent vehicles and direct entry of the samples on return to earth. This paper will discuss the concepts and their feasibility along with technology problems associated with them as surveyed from the reference material. The paper focuses primarily on the aerocapture technique as it relates to Mars orbit modification. Remaining orbit modification techniques are also discussed briefly for comparison.

Cruz, M. I.↗
NASA NTRS1980

Technology requirements for a generic aerocapture system

The technology requirements for the design of a generic aerocapture vehicle system are summarized. These spacecraft have the capability of completely eliminating fuel-costly retropropulsion for planetary orbit capture through a single aerodynamically controlled atmospheric braking pass from a hyperbolic trajectory into a near circular orbit. This generic system has application at both the inner and outer planets. Spacecraft design integration, navigation, communications, and aerothermal protection system design problems were assessed in the technology requirements study and are discussed in this paper.

Cruz, M. I.↗
NASA NTRS1980

Aerobraking and aerocapture for planetary missions

The paper examines the utilization of aerodynamic forces to capture a vehicle into a closed orbit and/or to modify an orbit. Attention is given to two techniques: aerobraking which uses drag during successive passes through the upper atmosphere to circularize a highly elliptical orbit, and aerocapture which transfers a vehicle into a closed stable orbit from a hyperbolic flyby trajectory. Sample missions employing both techniques are discussed.

French, J. R.↗
NASA NTRS1979

Aerocapture - A system design for planetary exploration

The paper presents the results of a study that developed conceptual designs of an atmospheric entry system with moderate to high L/D ratios to establish the concepts of aerocapture into low circular Mars orbits from hyperbolic flyby trajectories. The payloads considered in this study were those currently conceived for the Mars Sample Return (MSR) mission including single mission (SM) and multi-mission (MM) modes. The design concepts developed are also applicable (with small modification) for establishment of closed orbits about Venus and Saturn. The MSR mission payload requires an orbiter, lander, ascent vehicle, and rover, with a total mass of approximately 4000 kg. The emphasis during the study was placed on development of concepts for aerodynamic configuration, the aeroshell design, and a guidance, navigation, and control subsystem.

Cruz, M. I.↗
NASA NTRS1979

Aerocapture vehicle mission design concepts for the inner and outer planets

The paper presents mission design concepts using an aerocapture vehicle for future missions to the inner and outer planets which require substantial payloads in orbit that can not be readily realized using the present Space Transportation System (STS). Aerocapture is a mission design technique that utilizes aerodynamically controlled atmospheric entry to capture payloads into orbit as opposed to a completely propulsive orbit insertion. Results are presented which demonstrate great performance gains and acceptable accuracy using aerocapture. Attention is also given to the potential for aerocapture vehicle system design commonality for different missions, in order to demonstrate the ability of aerocapture as an interplanetary delivery technique to substantially augment the STS performance capabilities.

Cruz, M. I.↗
NASA NTRS1979

The aerocapture vehicle mission design concept

Aerocapture is a mission design concept which uses an aerodynamically controlled atmospheric entry to capture payloads into orbit as opposed to a completely propulsive orbit insertion. Results are presented which demonstrate great performance gains and good accuracy using aerocapture. These results deal only with projected Mars missions; therefore, the aerocapture vehicle system design requirements deal only with Mars. It will be evident, however, that this concept can be readily applied to other atmosphere-bearing celestial bodies.

Cruz, M. I.↗