Engineering Papers⌕ Search

Engineering topics

Croom, D. R.

Publications and source records attributed to Croom, D. R..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Low-speed wind-tunnel investigation of wing fins as trailing-vortex-alleviation devices on a transport airplane model

The trailing-vortex-alleviation effectiveness of both a one- and a two-fin configuration (semicircular with a radius of 0.043 semispan) on a jumbo-jet transport airplane model in its landing configuration was investigated in the Langley V/STOL tunnel, by the trailing-wing sensor technique. The fins were located on the upper surface of the transport model wing along the 30-percent-chord line. The fin configurations were effective in reducing the vortex-induced rolling moment, by amounts varying from 28 to 60 percent, on the trailing wing model located at a distance of 7.8 transport model wing spans downstream of the transport model. The flow over the fins and over the transport airplane model wing downstream of the fins was observed to be separated and turbulent. All fin configurations caused a reduction in maximum lift coefficient, a positive increment in drag coefficient, and an increment in nose-up pitching-moment coefficient on the transport airplane model.

Croom, D. R.↗
NASA NTRS1979

Low-speed wind-tunnel parametric investigation of flight spoilers as trailing-vortex-alleviation devices on a transport aircraft model

The trailing-wing sensor technique was used in the Langley V/STOL tunnel to determine the effectiveness of 11 combinations of the existing flight-spoiler segments on a jumbo-jet transport aircraft model when they were deflected as trailing-vortex-alleviation devices. All 11 of the flight-spoiler configurations investigated were effective in reducing the induced rolling moment on the trailing model. This investigation is an extension of earlier wind-tunnel and flight tests which showed that the existing flight spoilers on the jumbo-jet aircraft can be used as effective trailing-vortex-alleviation devices. Essentially, all of the reduction in induced rolling moment on the trailing-wing model was realized at a spoiler deflection of 45 deg for single-spoiler configurations, 30 for two-spoiler configurations, and 15 deg for both the three- and four-spoiler configurations. Of the 11 flight-spoiler configurations investigated, the most promising configuration for trailing-vortex abatement on the jumbo-jet aircraft appears to be the three inboard flight spoilers deflected 15 deg.

Croom, D. R.↗
NASA NTRS1979

Effects of a military cargo pod and tail fins on the aerodynamic characteristics of a large wide-body transport model

Wind tunnel tests were conducted on a 0.03 scale model of a large wide-body commercial aircraft to determine the effects on the static aerodynamic characteristics resulting from the attachment of a belly pod for the long-range deployment of outsize military equipment. The effectiveness of horizontal-tip fins in augmenting directional stability was investigated. At a test Reynolds number of 1.08 x 1,000,000, the addition of the pod results in an increase in total drag of approximately 20 percent. Trim drag due to the pod is very small. Although the pod produces a significant decrease in directional stability, the addition of the tip fins restores some of the stability, particularly at the lower angles of attack.

Jernell, L. S.↗
NASA NTRS1978

Wake vortex technology

A brief overview of the highlights of NASA's wake vortex minimization program is presented. The significant results of this program are summarized as follows: (1) it is technically feasible to reduce significantly the rolling upset created on a trailing aircraft; (2) the basic principles or methods by which reduction in the vortex strength can be achieved have been identified; and (3) an analytical capability for investigating aircraft vortex wakes has been developed.

Dunham, R. E., Jr.↗
NASA NTRS1977

Evaluation of flight spoilers for vortex alleviation

The paper describes the facilities and test procedures used in a series of wind-tunnel and full-scale flight investigations of the effectiveness of flight spoilers currently existing on wide-bodied transport jet aircraft when used as trailing vortex hazard alleviation devices. Examples of the results of such studies include the variation of trailing wing rolling-moment coefficient with downstream distance behind a B-747 airplane model with various segments of its flight spoilers deflected 45 deg, and comparisons with models without spoilers deflected. It is concluded that the existing flight spoilers on the B-747 are effective as trailing vortex attenuators.

Croom, D. R.↗
NASA NTRS1977

Wind-tunnel and flight evaluation of spoilers as trailing-vortex hazard alleviation devices

This paper presents the results of ground-based and flight investigations that have been performed at NASA for the purpose of development of spoilers as trailing-vortex hazard alleviation devices. Based on the results obtained in these investigations, it was found that the induced rolling moment on a trailing model can be reduced by spoilers located near the mid-semispan of a vortex-generating wing. Substantial reductions in induced rolling moment occur when the spoiler vortex attenuator is located well forward on both unswept and swept wing models. In addition, it was found by ground-based model tests and verified by full-scale flight tests that the existing flight spoilers on the B-747 aircraft are effective as trailing vortex attenuators. Based on the results of wind-tunnel investigations of the DC-10-30 and L-1011 aircraft models, the existing flight spoilers on both the DC-10-30 and L-1011 aircraft may also be effective trailing vortex attenuators.

Croom, D. R.↗
NASA NTRS1977

The development and use of spoilers as vortex attenuators

Results are presented of groundbased and flight investigations performed to develop spoilers as trailing vortex alleviation devices. Based on the results obtained in these investigations, it was found that the induced rolling moment on a trailing model can be reduced by spoilers located near the midsemispan of a vortex generating wing. Substantial reductions in induced rolling moment occur when the spoiler vortex attenuator is located well forward on both unswept and swept wing models. In addition, it was found that existing flight spoilers on the jumbo-jet transport aircraft can be effective as trailing vortex attenuators.

Croom, D. R.↗
NASA NTRS1976

Low speed wind tunnel investigation of flight spoilers as trailing-vortex-alleviation devices on an extended-range wide body tri-jet airplane model

An investigation was made in the Langley V/STOL tunnel to determine, by the trailing wing sensor technique, the effectiveness of various segments of the existing flight spoilers on an extended-range wide-body tri-jet transport airplane model when they were deflected as trailing-vortex-alleviation devices. On the transport model with the approach flap configuration, the four combinations of flight-spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 25 to 45 percent at downstream distances behind the transport model of 9.2 and 18.4 transport wing spans. On the transport airplane model with the landing flap configuration, the four combinations of flight-spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 35 to 60 percent at distances behind the transport model of from 3.7 to 18.4 transport wing spans, 18.4 spans being the downstream limit of distances used.

Croom, D. R.↗
NASA NTRS1976

Low-speed wind-tunnel investigation of flight spoilers as trailing-vortex-alleviation devices on a medium range wide-body tri-jet airplane model

An investigation was made in the V/STOL tunnel to determine, by the trailing wing sensor technique, the effectiveness of various segments of the existing flight spoilers on a medium range wide body tri-jet transport airplane model when they were deflected as trailing vortex alleviation devices. The four combinations of flight spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 15 to 60 percent at distances behind the transport model of from 3.9 to 19.6 transport wing spans, 19.6 spans being the downstream limit of distances used. Essentially all of the reduction in induced rolling moment on the trailing wing model was realized at a spoiler deflection of about 45 deg.

Croom, D. R.↗
NASA NTRS1976

Low-speed wind-tunnel investigation of various segments of flight spoilers as trailing-vortex-alleviation devices on a transport aircraft model

An investigation was made in the Langley V/STOL tunnel to determine, by the trailing wing sensor technique, the effectiveness of various segments of the existing flight spoilers on a transport aircraft model when they were deflected as trailing-vortex-alleviation devices. The four combinations of flight-spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 40 to 50 percent at distances behind the transport model of from about 7 to 27 transport wing spans, 27 spans being the downstream limit of distances used in this investigation. Results obtained at about 7 wing spans downstream for two of the spoiler configurations indicate that essentially all the reduction in induced rolling moment on the trailing wing model was realized at a spoiler deflection of about 30 deg.

Croom, D. R.↗
NASA NTRS1975

Low speed wind tunnel investigation of span load alteration, forward-located spoilers, and splines as trailing-vortex-hazard alleviation devices on a transport aircraft model

The effectiveness of a forward-located spoiler, a spline, and span load alteration due to a flap configuration change as trailing-vortex-hazard alleviation methods was investigated. For the transport aircraft model in the normal approach configuration, the results indicate that either a forward-located spoiler or a spline is effective in reducing the trailing-vortex hazard. The results also indicate that large changes in span loading, due to retraction of the outboard flap, may be an effective method of reducing the trailing-vortex hazard.

Croom, D. R.↗
NASA NTRS1975

Low-speed wind-tunnel investigation of forward-located spoilers and trailing splines as trailing-vortex hazard-alleviation devices on an aspect-ratio-8 wing model

An investigation was made in the Langley V/STOL tunnel in order to determine, by the trailing-wing sensor technique, the effectiveness of either a forward-mounted spoiler or a tip-mounted spline as trailing-vortex attenuation devices on an unswept aspect-ratio-8 wing model. The trailing-wing rolling-moment data taken in the tunnel diffuser section show good agreement with the data taken in the tunnel test section. This agreement indicates that reasonable results may be obtained in the Langley V/STOL tunnel in experimental investigations of the trailing-vortex hazard at relatively great distances behind aircraft models.

Croom, D. R.↗
NASA NTRS1973

Aerodynamic effects of five lift-fan pod arrangements on an unpowered V/STOL transport model

An investigation was conducted in the Langley V/STOL tunnel to determine the effect of longitudinally oriented wing-mounted pods on the longitudinal and lateral aerodynamic characteristics in the cruise flight condition of a high-wing V/STOL transport model. Five pod arrangements were tested - three configurations with in-line pods at 20, 40, or 60 percent semispan and two split pod configurations with rear pods at 20 percent semispan and front pods at 40 or 60 percent semispan. In general, addition of the pods to the model decreased the stability, increased the lift-curve slope, and alleviated the abrupt stall of the basic model. The configuration with pods at 20 percent semispan had an abrupt instability at 10 deg angle of attack, All the configurations had lateral stability at sideslip angles from 5 to -5 deg. Very little difference in results existed between the configurations with pods at 40 and 60 percent semispan. Of the split pod configurations, the configuration with front pods at 40 percent semispan offered the best trimmed lift and lift-induced drag characteristics at high angles of attack. The configuration with in-line pods at 40 or 60 percent semispan provided the best cruise characteristics of all the pod configurations.

Thomas, J. L.↗
NASA NTRS1972

Flexible wings for transportation.

The possible uses of flexible wings for transportation of passengers and cargo from point to point on earth are discussed along with emergency applications of flexible wings in connection with conventional aircraft. Topics considered include gliding and soaring as a sport, towing of flexible-wing gliders for cargo delivery, powered flight with small aircraft having folding flexible wings, aerial dropping of personnel and cargo on flexible wings instead of parachutes, landing and recovery of rocket payloads by means of flexible wings, and use of flexible wings with ejection seats and as an emergency landing system for conventional aircraft.

Rogallo, F. M.↗
NASA NTRS1971

Deployment loads data from a free-flight investigation of all flexible parawings having 371.612 sq meters (4000 sq feet) of wing area

A free-flight test program to determine the deployment characteristics of all-flexible parawings was conducted. Both single-keel and twin-keel parawings having a wing area of 4000 square feet with a five-stage reefing system were tested by use of a bomb-type instrumented test vehicle. Several twin-keel-parawing tests were also made by using an instrumented controllable sled-type test vehicle. The systems were launched from either a C-130 or a C-119 carrier airplane, and a programer parachute was used to bring the test vehicle to a proper dynamic pressure and near-vertical flight path prior to deployment of the parawing system. The free-flight deployment loads data are presented in the form of time histories of individual suspension-line loads and total loads.

Croom, D. R.↗