Engineering topics

Criswell, D. R.

Publications and source records attributed to Criswell, D. R..

At least 37 records · Page 2

NASA NTRS1978

Commercial prospects for extraterrestrial materials

Prospects for using lunar resources as materials for spaceborne construction are examined. The use of lunar construction materials is considered economically justifiable in the case of such large scale projects as space power stations (SPS). A proposed scenario for the acquisition and space processing of lunar materials involves the use of space shuttles to deliver an assembly base to earth orbit, where a solar powered mass driver reaction engine rocket is assembled and used to bring sections of a lunar base from low earth orbit to the moon. The rocket would then be positioned at the L2 equilibrium point in order to catch lunar soil propelled into space by a mass driver and bring it to the assembly base for chemical processing. Cost factors would be comparable to those of the terrestrial deployment of the first SPS, and such a project could be in operation before the end of the century.

Criswell, D. R.↗

NASA NTRS1978

Lunar dust transport by photoelectric charging at sunset

The motion of dust grains from a photoelectrically charged object at the moon's sunset terminator is studied with the aid of a simple model. It is shown that sunlit objects ranging in size from less than 0.01 cm to 5 cm in radius are responsible for the levitation of dust grains to heights of observed horizon glow. The transverse displacement of these grains is observed to be at least twice their maximum altitude, so that fitting the latter to horizon glow implies horizontal particle ranges typically 6 to 60 cm. Detachment of these grains from the sunlit areas takes place mainly along the contracting sunlight boundaries as the areas shrink during sunset. A high ratio of intergrain adhesion force to dust-grain weight is essential for the occurrence of horizon glow and significant dust transport from the subcentimeter sized sunlit areas.

Pelizzari, M. A.↗

NASA NTRS1977

Intense localized photoelectric charging in the lunar sunset terminator region. I - Development of potentials and fields. II - Supercharging at the progression of sunset

Numerical computations show that locally sunlit areas in the dark lunar sunset terminator region can acquire large electric potentials and fields due to the retention of photoelectrons emitted from sunlit areas by surrounding dark areas of the highly resistive lunar surface. It is shown that the potential can increase or decrease depending on the rates of photoelectron emission and areal contraction. It is concluded that in the lunar situation, the likely result is an increase in the potential, or a 'supercharging' of the sunlit area.

Criswell, D. R.↗

NASA NTRS1977

Photoelectric charging of partially sunlit dielectric surfaces in space

Sunlight-shadow effects may substantially alter the charging situation for a dielectric surface. The sunlight-shadow boundary tends to be the site of intense multipole electric fields. Charges on a sunlit dielectric surface have a finite effective mobility. The charge distribution tends to resemble that on a conducting surface. A boundary between a conducting and a dielectric surface may not represent a conductivity discontinuity when this boundary is sunlit; charges may migrate at a nontrivial rate across the boundary. A contracting or expanding sunlit area may experience a supercharging.

De, B. R.↗

NASA NTRS1977

Lunar materials for construction of space manufacturing facilities

Development of industrial operations in deep space would be prohibitively expensive if most of the construction and expendable masses had to be transported from earth. Use of lunar materials reduces the needed investments by a factor of 15 to 20. It is shown in this paper that judicious selection of lunar materials will allow one to obtain hydrogen, nitrogen, carbon, helium and other specific elements critical to the support of life in large space habitats at relatively low costs and lower total investment even further. Necessary selection techniques and extraction schemes are outlined. In addition, tables are presented of the oxide and elemental abundances characteristic of the mare and highland regions of the moon which should be useful in evaluating what can be extracted from the lunar soils.

Criswell, D. R.↗

NASA NTRS1977

Demandite, lunar materials and space industrialization

Terrestrial industry consumes a wide range of elements in producing the outputs which support and make industrial societies possible. 'Demandite' is a conceptual or synthetic molecule which is composed of the weight fractions of the major elements consumed by industry. Demandite needed for mature industrial activities in space will differ from the terrestrial composition because solar energy must replace hydrocarbon-energy, lunar and asteroidal bulk compositions are different from mineral deposits on the earth, and the major bulk processing in space will be the creation of radiation shielding for human habitats to provide real estate in space complete with water, atmosphere and life-stock elements. Demandite cost may be dominated by earth to deep space transport cost of minor elemental constituents depleted in the lunar soils unless careful attention is given to substitution of materials, searches of the moon (polar regions) and asteroids for the depleted elements, and continuing lowering of earth to deep space transport costs.

Criswell, D. R.↗

NASA NTRS1976

Sound-producing dune and beach sands

Acoustic and seismic outputs of booming sands and singing (squeaking) sands in response to shearing are investigated, with samples of silent sands studied for controls. A vertical-axis geophone buried at shallow depth and an air microphone were used in the studies. The frequency spectra of the acoustic and seismic responses, propagation delays, comparison of acoustic and seismic traces, grain size and grain surface texture, particle morphology, coherent behavior of grains in assemblages, and relation to prevalent local winds were studied. Mechanisms are still obscure and disputed; slumping and avalanches were induced artificially in some studies. Existence of booming dune phenomena on Mars or on the moon is conjectured.

Lindsay, J. F.↗

NASA NTRS1976

Utilization of lunar materials and expertise for large scale operations in space: Abstracts

The practicality of exploiting the moon, not only as a source of materials for large habitable structures at Lagrangian points, but also as a base for colonization is discussed in abstracts of papers presented at a special session on lunar utilization. Questions and answers which followed each presentation are included after the appropriate abstract. Author and subject indexes are provided.

Criswell, D. R.↗

NASA NTRS1975

Seismic and acoustic emissions of a booming dune

Acoustic and seismic spectra of booming sand dunes that emit low-frequency musical resonances when the dunes slump or undergo forced shearing are analyzed and described. Previous studies of booming, squeaking, screeching, and roaring sands with pure outputs resembling those of musical instruments, or more turbulent acoustic outputs such as the sound of low-flying propeller aircraft, are reviewed. The possibility of similar phenomena on the moon (thermal moonquakes) or nearby planets (Mars, Venus) is considered on the basis of planetary topography, soil mechanics, and atmosphere.

Criswell, D. R.↗

NASA NTRS1975

Lunar topography and the limb compression source regions

Data from the Apollo 15, 16, and 17 laser altimeters have been used to study slopes, elevations, and roughness in the identifiable regions on the moon which sporadically produce plasma compressions and magnetic-field enhancements in the solar wind/lunar void boundary when those regions are at a flow limb. It is found that occurrence rates for such 'limb compressions' derived from Explorer 35 satellite measurements are significantly correlated with peak, average, and RMS slopes in the source regions, whereas rates derived from Apollo 15 and 16 subsatellite data are not correlated with topography. This suggests that two or more mechanisms operate in the source regions to produce limb compressions. Together with the known correlation between limb compressions and local surface remanent magnetic fields, the results indicate that lunar magnetization is not strongly related to surface features.

Srnka, L. J.↗

NASA NTRS1975

The Rosiwal Principle and the regolithic distributions of solar-wind elements

In situ accumulation of solar elements is studied for the purpose of determining the extent of applicability of the Rosiwal Principle. The Rosiwal Principle states that the grain exposure area is proportional to the fraction of the unit volume occupied by the grains, and the test involves measurement of the relative concentrations of inert gases and reactive elements across sets of lunar fines samples for which mean grain size, sorting, and minimum radius of surface correlation are known. In some cases, the quantity of an element implanted into the lunar fines from the solar wind is found to be surface correlated, and the implications of this relationship are considered. According to the Rosiwal Principle, coarse soils should retain less inert gas than fine soil. The Principle can also be applied to species volatized or sputtered from the lunar surface and redeposited locally.

Criswell, D. R.↗

NASA NTRS1974

Surveyor observations of lunar horizon-glow

Each of the Surveyor 7, 6, and 5 spacecraft observed a line of light along its western lunar horizon following local sunset. It has been suggested that this horizon-glow (HG) is sunlight, which is forward-scattered by dust grains present in a tenuous cloud formed temporarily just above sharp sunlight/shadow boundaries in the terminator zone. Electrically charged grains could be levitated into the cloud by intense electrostatic fields extending across the sunlight/shadow boundaries. Detailed analysis of the HG absolute luminance, temporal decay, and morphology confirm the cloud model. The levitation mechanism must eject 10,000,000 more particles per unit time into the cloud than could micrometeorites. Electrostatic transport is probably the dominant local transport mechanism of lunar surface fines.

Rennilson, J. J.↗

NASA NTRS1974

Lunar interactions: Abstracts of papers presented at the Conference on Interactions of the Interplanetary Plasma with the Modern and Ancient Moon

Reviewed are the active mechanisms relating the moon to its environment and the linkage between these mechanisms and their records in the lunar sample and geophysical data. Topics: (1) large scale plasma interactions with the moon and non-magnetic planets; (2) ancient and present day lunar surface magnetic and electric fields; (3) dynamics and evolution of the lunar atmosphere; (4) evolution of the solar plasma; (5) lunar record of solar radiations; (6) non-meteoritic and meteoritic disturbance and transport of lunar surface materials; and (7) future lunar exploration.

Criswell, D. R.↗

NASA NTRS1974

Evidence for a high altitude distribution of lunar dust

The crew of Apollo 17 saw streamers accompanying spacecraft sunrise. The time variations of the brightness of these streamers indicate that they were produced by light scattering in the lunar vicinity rather than brightness variations of material streamers emanating from the sun. The angular extent of the streamers indicate that the light scattering particulates extended from the lunar surface to above the orbital altitude of the spacecraft. Although observed as typical sunrise phenomena by Apollos 10 and 17, and possibly by 8 and 15 as well, streamers were not observed during the flight of Apollo 16. The scattering particles seem to be present sporadically, most likely lunar dust of tenth micron scale, and not a result of spacecraft contamination.

Mccoy, J. E.↗

NASA NTRS1973

Surveyor observations of lunar horizon-glow.

Each of the Surveyor 7, 6, and 5 spacecraft observed a line of light along its western lunar horizont following local sunset. This horizon-glow (HG) is sunlight, which is forward scattered by dust grains present in a tenuous cloud formed temporarily (less than 3 hrs duration) just above sharp sunlight/shadow boundaries in the terminator zone. Electrically charged grains are levitated into the cloud by intense electrostatic fields (above 500 volts per centimeter) extending across the sunlight/shadow boundaries. Detailed analysis of the HG absolute luminance, temporal decay, and morphology confirm the cloud-model. This electrostatic mechanism ejects 10 million more particles per unit time into the cloud than could micro-meteorites. Electrostatic transport is probably the dominant local transport mechanism of lunar surface fines.

Rennilson, J. J.↗

NASA NTRS1973

Photoelectrons and solar wind/lunar limb interaction.

It is suggested that boundary conditions for solar wind/lunar limb interactions are active. The 'whole-moon' limb does not evoke a shock cone, because warm (approximately equal 13 eV/electron) solar wind electrons are replaced by cool (less than or equal to 2 eV/electron) photoelectrons that are ejected from the generally smooth areas of the lunar terminator illuminated at glazing angles by the sun. A localized volume of low thermal pressure is created in the solar wind by these cool photoelectrons. The solar wind expands into this turbulence-suppressive volume without shock production. Conversely, directly illuminated highland areas exchange hot photoelectrons (greater than 20 eV/electron) for warm solar wind electrons. The hot electrons generate a localized pressure increase in the adjacent solar wind flow which evokes a shock streamer in the solar wind. Shock streamers are identifiable by a coincident increase in the magnitude of the solar wind magnetic field immediately external to the lunar wake. Shock occurrence is controlled by lunar topography, solar activity in the hard ultraviolet (greater than 20 eV), solar wind electron density and thermal velocity, and the intensity of the solar wind magnetic field.

Criswell, D. R.↗

NASA NTRS1973

Photoelectrons and lunar limb shocks

It is suggested that boundary conditions for solar wind/lunar limb interactions are active. The 'whole-moon' limb does not evoke a shock cone because warm solar wind electrons are replaced by cool photoelectrons that are ejected from the generally smooth areas of the lunar terminator illuminated at glancing angles by the sun. A localized volume of low thermal pressure is created in the solar wind by these cool photoelectrons. The solar wind expands into this volume without shock production. Directly illuminated highland areas exchange hot photoelectrons for warm solar wind electrons. The hot electrons generate a localized pressure increase in the adjacent solar wind flow which evokes a shock streamer in the solar wind. Shock streamers are identifiable by a coincident increase in the magnitude of the solar wind magnetic field. Shock occurrence is controlled by lunar topography, solar activity in the hard ultraviolet, solar wind electron density and thermal velocity, and the density of the solar wind magnetic field.

Criswell, D. R.↗

NASA NTRS1973

Horizon-glow and the motion of lunar dust

Surveyor-7 photographed a bright glow along the western lunar horizon one hour after local sunset. This horizon-glow (HG) must result from the forward scattering of sunlight by electrically charged dust grains which are electrostatically levitated 3 to 30 cm above rocks or surface irregularities located in the lunar terminator zone. Column densities the order of 50 grains/sq cm are produced. The mechanism by which the electrostatic field is generated is described, and the amount of surface material annually churned by this process is estimated.

Criswell, D. R.↗