Engineering topics

Coombs, C. R.

Publications and source records attributed to Coombs, C. R..

14 records

NASA NTRS1993

Modelling hypervelocity impacts into aluminum structures based on LDEF data

Realizing and understanding the effects of the near-Earth space environment on a spacecraft during its mission lifetime is becoming more important with the regeneration of America's space program. Included among these potential effects are the following: erosion and surface degradation due to atomic oxygen impingement; ultraviolet exposure embrittlement; and delamination, pitting, cratering, and ring formation due to micrometeoroid and debris impacts. These effects may occur synergistically and may alter the spacecraft materials enough to modify the resultant crater, star crack, and/or perforation. This study concentrates on modelling the effects of micrometeoroid and debris hypervelocity impacts into aluminum materials (6061-T6). Space debris exists in all sizes, and has the possibility of growing into a potentially catastrophic problem, particularly since self-collisions between particles can rapidly escalate the number of small impactors. We have examined the morphologies of the Long Duration Exposure Facility (LDEF) impact craters and the relationship between the observed impact damage on LDEF versus the existing models for both the natural (micrometeoroid) and manmade (debris) environments in order to better define these environments.

Coombs, C. R.↗

NASA NTRS1993

Remote sensing studies of the northeastern portion of the lunar nearside

During the Galileo spacecraft encounter with the Earth-Moon system in December, 1992, a variety of spectral data and imagery were obtained for the eastern limb region as well as much of the lunar nearside. In order to support this encounter, we have been collecting near-infrared spectra and other remote sensing data for that portion of the northeastern nearside (NEM region) for which the highest resolution Galileo data were obtained. Analysis of spectra obtained for highlands units in the NEN region indicates that most surface units are dominated by anorthositic norite. To date, no pure anorthosites have been identified in the region. Several dark-haloed impact craters have exposed mare material from beneath highlands-rich surface units. Hence, ancient mare volcanism occurred in at least a portion of the NEN region. Endogenic dark-haloed craters in the region are the source of localized dark mantle deposits (LDMD) of pyroclastic origin and at least two compositional groups are present. The Galileo spacecraft obtained very high-resolution remote sensing data for the northeastern part of the nearside of the Moon. In order to prepare for and support this encounter, we have collected and analyzed a variety of spectral data for the NEN region. Numerous unanswered questions exist for this region. These include: (1) the composition and stratigraphy of the local highlands crust, (2) the nature and mode of formation of regional light plains, (3) the composition of localized pyroclastic deposits, and (4) the distribution of possible cryptomare in the region. The purpose of this paper is to present the preliminary results of our analyzes of remote sensing data of remote sensing data obtained for the NEN region.

Hawke, B. R.↗

NASA NTRS1993

A fresh look at crater scaling laws for normal and oblique hypervelocity impacts

With the concomitant increase in the amount of man-made debris and an ever increasing use of space satellites, the issue of accidental collisions with particles becomes more severe. While the natural micrometeoroid population is unavoidable and assumed constant, continued launches increase the debris population at a steady rate. Debris currently includes items ranging in size from microns to meters which originated from spent satellites and rocket cases. To understand and model these environments, impact damage in the form of craters and perforations must be analyzed. Returned spacecraft materials such as those from LDEF and Solar Max have provided such a testbed. From these space-aged samples various impact parameters (i.e., particle size, particle and target material, particle shape, relative impact speed, etc.) may be determined. These types of analyses require the use of generic analytic scaling laws which can adequately describe the impact effects. Currently, most existing analytic scaling laws are little more than curve-fits to limited data and are not based on physics, and thus are not generically applicable over a wide range of impact parameters. During this study, a series of physics-based scaling laws for normal and oblique crater and perforation formation has been generated into two types of materials: aluminum and Teflon.

Watts, A. J.↗

NASA NTRS1992

Environment modelling in near Earth space: Preliminary LDEF results

Hypervelocity impacts by space debris cause not only local cratering or penetrations, but also cause large areas of damage in coated, painted or laminated surfaces. Features examined in these analyses display interesting morphological characteristics, commonly exhibiting a concentric ringed appearance. Virtually all features greater than 0.2 mm in diameter possess a spall zone in which all of the paint was removed from the aluminum surface. These spall zones vary in size from approximately 2 - 5 crater diameters. The actual craters in the aluminum substrate vary from central pits without raised rims, to morphologies more typical of craters formed in aluminum under hypervelocity laboratory conditions for the larger features. Most features also possess what is referred to as a 'shock zone' as well. These zones vary in size from approximately 1 - 20 crater diameters. In most cases, only the outer-most layer of paint was affected by this impact related phenomenon. Several impacts possess ridge-like structures encircling the area in which this outer-most paint layer was removed. In many ways, such features resemble the lunar impact basins, but on an extremely reduced scale. Overall, there were no noticeable penetrations, bulges or spallation features on the backside of the tray. On Row 12, approximately 85 degrees from the leading edge (RAM direction), there was approximately one impact per 15 cm(exp 2). On the trailing edge, there was approximately one impact per 72 cm(exp 2). Currently, craters on four aluminum experiment trays from Bay E09, directly on the leading edge are being measured and analyzed. Preliminary results have produced more than 2200 craters on approximately 1500 cm(exp 2) - or approximately 1 impact per 0.7 cm(exp 2).

Coombs, C. R.↗

NASA NTRS1992

A Ground-based Search for Lunar Resources Using High-resolution Imaging in the Infrared

When humans return to the Moon, lunar resources will play an important role in the successful deployment and maintenance of the lunar base. Previous studies have illustrated the abundance of resource materials available on the surface of the Moon, as well as their ready accessibility. Particularly worth considering are the lunar regional (2,000-30,000 sq km) pyroclastic deposits scattered about the lunar nearside. These 30-50-m-thick deposits are composed of fine-grained unconsolidated titanium- and iron-rich mafic glasses and may be used as bulk feedstock for the beneficiation of oxygen, iron, titanium, sulfur, and other solar wind gases, or simply used as is for construction and shielding purposes. A groundbased observing survey of the resource-rich regions on the lunar nearside using a new imaging technique designed to obtain much higher resolution images, and more precise compositional analyses than previously obtainable is proposed.

Coombs, C. R.↗

NASA NTRS1991

Remote sensing of regional pyroclastic deposits on the north central portion of the lunar nearside

High-resolution 3.0-cm radar data for the Rima Bode regional pyroclastic deposit and a number of UV-visible reflectance spectra for regional pyroclastic deposits on the north-central portion of the lunar nearside are analyzed and compared to existing data. The data obtained indicate that small craters in this deposit excavated loose unwelded pyroclastic particles, suggesting that welded layers or lenses do not exist at depths within the deposit's core area. The 70-cm radar data indicate that the Roma Bode deposit is thinner than the pyroclastic unit on the Aristarchus Plateau. The surfaces of all these regional pyroclastic deposits are dominated by ilmenite-rich black spheres, and contamination by low-Ti, nonpyroclastic debris appears to be minimal. The fine-grained block-free uncontaminated Rima Bode would be ideal for lunar mining operations and for rapidly covering lunar base modules with an adequate thickness of shielding material for protection from meteorite impact and space radiation.

Hawke, B. R.↗

NASA NTRS1990

The Alphonsus region - A geologic and remote-sensing perspective

A number of interesting questions exist concerning the composition and origin of a number of geologic units in the west-central highlands crater Alphonsus. This paper utilizes a variety of newly obtained remote sensing data to address these questions and improve the current understanding of the geologic history of the Alphonsus region. Near-infrared and UV/VIS reflectance spectra were obtained and analyzed for many of the geologic features, the results of which are presented here. Spectra collected for pyroclastic debris associated with three endogenic dark halo crater complexes on the floor of Alphonsus indicate a basaltic assemblage rich in olivine. These pyroclastic deposits exhibit generally low returns on the depolarized 3.8 cm radar image. An exogenic dark halo crater was identified on the interior of Alphonsus and appears to be composed of a mixture of pyroclastic debris and highlands material. The light plains deposits and other highland units in the Alphonsus region generally exhibit a noritic compostion. However, the Alphonsus central peak is composed of pure anorthosite. This composition is unique within the region.

Coombs, C. R.↗

NASA NTRS1990

Terrestrial analogs to lunar sinuous rilles - Kauhako Crater and channel, Kalaupapa, Molokai, and other Hawaiian lava conduit systems

Two source vents, one explosive and one effusive erupted to form a cinder cone and low lava shield that together compose the Kalaupapa peninsula of Molokai, Hawaii, A 50-100-m-wide channel/tube system extends 2.3 km northward from kauhako crater in the center of the shield. Based on modeling, a volume of up to about 0.2 cu km of lava erupted at a rate of 260 cu m/sec to flow through the Kauhako conduit system in one of the last eruptive episodes on the peninsula. Channel downcutting by thermal erosion occurred at a rate of about 10 micron/sec to help form the 30-m-deep conduit. Two smaller, secondary tube systems formed east of the main lava channel/tube. Several other lava conduit systems on the islands of Oahu and Hawaii were also compared to the Kauhako and lunar sinuous rille systems. These other lava conduits include Whittington, Kupaianaha, and Mauna Ulu lava tubes. Morphologically, the Hawaiian tube systems studied are very similar to lunar sinuous rilles in that they have deep head craters, sinuous channels, and gentle slopes. Thermal erosion is postulated to be an important factor in the formation of these terrestrial channel systems and by analogy is inferred to be an important process involved in the formation of lunar sinuous rilles.

Coombs, C. R.↗

NASA NTRS1990

Ilmenite-rich pyroclastic deposits - An ideal lunar resource

With a view of investigating possible economic benefits that a permanent lunar settlement might provide to the near-earth space infrastructures, consideration was given to the ilmenite-rich pyroclastic deposits as sources of oxygen (for use as a propellant) and He-3 (for nuclear fusion fuel). This paper demonstrates that ilmenite-rich pyroclastic deposits would be excellent sources of a wide variety of valuable elements besides O and He-3, including Fe, Ti, H2, N, C, S, Cu, Zn, Cd, Bi, and Pb. It is shown that several ilmenite-rich pyroclastic deposits of regional extent exist on the lunar surface. The suitability of regional pyroclastic deposits for lunar mining operations, construction activities, and the establishment of permanent lunar settlements is examined.

Hawke, B. R.↗

NASA NTRS1990

Pyroclastic deposits as sites for lunar bases

Ilmenite-rich pyroclastic deposits may prove to be excellent sites for the establishment of a permanent lunar base for mining purposes. A wide variety of potentially useful by-products could be produced (e.g., Fe, Ti, H, N, C, S, Cu, Zn, Cd, Bi, and Pb). A number of ilmenite-rich pyroclastic deposits of regional extent has been studied. The physical properties of the regional pyroclastic units have important implications for lunar construction. These extensive, deep deposits of ilmenite-rich pyroclastic material are block-free and uncontaminated; they could be easily excavated and would be ideal for lunar mining operations. These deep, loose pyroclastic deposits would also be ideal for rapidly covering base modules with an adequate thickness of shielding.

Hawke, B. Ray↗

NASA NTRS1989

A remote-sensing and geologic investigation of the Crueger region of the moon

Earth-based and spacecraft photography were used along with spectral reflectance and radar data to study the origin, composition, and mode of emplacement of the geologic units in and around the Crueger crater. It is shown that the composition of the mare unit within the crater is similar to that of other intermediate TiO2 basalt deposits on the lunar near side. The results suggest that the Crueger crater is a normal pre-Orientale impact crater that was modified by Orientale ejecta and later flooded by mare basalt.

Hawke, B. R.↗

NASA NTRS1989

Remote sensing and geologic studies of localized dark mantle deposits on the moon

Localized lunar dark mantle deposits (LDMD) are small, smooth low-albedo units of pyroclastic origin commonly found associated with endogenic source craters. Analysis of near-infrared spectra, multispectral images, and radar data obtained for 25 LDMD has led to the identification of three compositional groups of LDMD. Group 1 deposits are composed predominantly of highlands-rich wall rock but also contain a substantial juvenile component, Group 2 deposits are composed largely of mare plug rock material, while Group 3 deposits are rich in a mixture of olivine and pyroxene. Variations in eruption conditions are interpreted to be largely responsible for the varying mineralogy of these three types of deposits.

Hawke, B. R.↗

NASA NTRS1987

Preliminary results of spectral reflectance studies of tycho crater

The preliminary analysis and interpretation of near infrared spectra obtained for both the interior and exterior deposits associated with the Tycho crater is presented. Specific objectives were: (1) to determine the composition and stratigraphy of the highland crust in the Tycho target site; (2) to determine the likely composition of the primary ejecta which may be present in ray deposits; (3) to investigate the nature of spectral units defined in previous studies; (4) to further investigate the nature and origin of both the bright and dark haloes around the rim crest; and (5) to compare the compositions determined for the Tycho units with those of the Aristarchus crater as well as typical highland deposits. The spectra obtained for the interior areas exhibit similar spectral features. These include relatively strong 1 micron absorption bands whose minima are centered between 0.97 and 0.99 microns and shallow to intermediate continuum slopes. The spectra generally exhibit indications of a 1.3 micron feature consistent with the presence of Fe(2+) bearing plagioclase feldspar. The strong 1 micron absorption features indicate a dominant high Ca clinopyroxene component. Results obtained from the ejecta deposits show that the spectrum of the inner, bright halo is almost identical with those obtained for interior units. The spectrum of the dark halo exhibits a wide, relatively shallow absorption feature centered at 1.01 microns, a 1.3 micron absorption, and a steep continuum slope. This spectrum is interpreted as indicating the presence of pyroxene, Fe-bearing feldspar, and a significant component of Fe-bearing impact melt glass. Finally, the spectra of spots inside Tycho show similarity with certain spectra for Aristarchus. However, the suite of spectra obtained for Tycho exhibits a different trend in terms of band center versus width.

Hawke, B. R.↗

NASA NTRS1987

Preliminary results of geologic and remote sensing studies of Rima Mozart

In order to better understand the processes responsible for the formation of lunar sinuous rilles, a study of Rima Mozart was conducted using a variety of geologic, photographic, and remote sensing data. The apparent source of this rille is located in a highlands unit of known composition and it is hypothesized that thermal and mechanical erosion played an important role in the formation of Rima Mozart. Excellent photographic, topographic, multispectral, and radar data exist for this rille. The preliminary results of an analysis of this data are presented. Photographic data indicates the presence of two volcanic source vents for Rima Mozart: Kathleen and Ann. It is suggested that Rima Mozart, like many other lunar sinuous rilles, was most likely formed by a combination of events. Rima Mozart does follow a pre-existing, dominant NW/SE structural trend suggesting the influence of structural features on the rille, however, the tectonic influence is not the sole source for the formation of the rille, as suggested by the presence of the two source vents and the spatter around Ann. It is suggested that the rille formation began with an explosive eruption at Kathleen which later calmed down to a pulsating, high volume, low-viscosity lava flow. The rapid effusion rate of the magma as well as its high temperature and turbid nature helped carve the sinuous rille into the fractured and structurally weak Apennine Bench Formation underneath. Similar eruptions and subsequent flows were also created at Ann and joined to the main channel by a NE-trending secondary rille.

Coombs, C. R.↗