Engineering topics
Publications and source records attributed to Cook, David.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-A03 ARM-AMF3-Oliktok. This is the FLUXNET version of the carbon flux data for the site US-A03 ARM-AMF3-Oliktok produced by applying the standard ONEFlux (1F) software. Site Description - This site is located at ARM AMF3 site near Point Oliktok, AK
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-A10 ARM-NSA-Barrow. This is the FLUXNET version of the carbon flux data for the site US-A10 ARM-NSA-Barrow produced by applying the standard ONEFlux (1F) software. Site Description - This site is located at ARM North Slope of Alaska site near Barrow, AK
In this work, an accident tolerant fuel cladding system with Cr coating deposited using physical vapour deposition (PVD) method onto commercial Optimized ZIRLO™ was studied. The cladding tubes were machined into C-rings and loaded to failure under compression with real-time synchrotron micro-X-ray computed tomography (XCT) imaging at room temperature (RT), 345 °C, 650 °C and 950 °C in argon (Ar) atmosphere. The mechanical behaviour and failure processes were found strongly temperature-dependent where the Cr coating showed brittle fracture at RT and 345 °C, ductile fracture at 650 °C and a reversion to brittle fracture at 950 °C. Nanoindentation measurements and scanning electron microscopy (SEM) imaging were conducted on the materials after high temperature testing. It was found that recrystallisation of the Cr coating occurred at elevated temperatures, which significantly affected its local properties hence the failure behaviour at different temperatures. This work represents the first in situ 3D XCT observation of progressive failure processes in PVD Cr-coated ZIRLO claddings up to 950 °C providing critical insights into its brittle-to-ductile transition (BDTT) behaviour and subsequent ductile-to-brittle reversion with the increase in temperature. Moreover, results are compared with other PVD Cr-coated Zircaloy materials from open literature; the influences of the coating microstructure and local properties on the failure stress/strain and fracture processes are discussed.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-A39 ARM-SGP-Morrison. This is the FLUXNET version of the carbon flux data for the site US-A39 ARM-SGP-Morrison produced by applying the standard ONEFlux (1F) software. Site Description - This site is located at ARM SGP Extended Facility 39 near Morrison, OK
This is the AmeriFlux version of the carbon flux data for the site US-A39 ARM-SGP-Morrison. Site Description - This site is located at ARM SGP Extended Facility 39 near Morrison, OK