Engineering Papers⌕ Search

Engineering topics

Contreras, M

Publications and source records attributed to Contreras, M.

Improved Energy Conversion Efficiency in Wide-Bandgap Cu(In,Ga)Se2 Solar Cells: Preprint

This report outlines improvements to the energy conversion efficiency in wide bandgap (Eg>1.2 eV) solar cells based on CuIn1-xGaxSe2. Using (a) alkaline containing high temperature glass substrates, (b) elevated substrate temperatures 600degC-650degC and (c) high vacuum evaporation from elemental sources following NREL's three-stage process, we have been able to improve the performance ofwider bandgap solar cells with 1.2 18% for absorber bandgaps~1.30 eV and efficiencies~16% for bandgaps up to~1.45 eV. In comparing J-V parameters in similar materials, we establish gains in the open-circuit voltage and, to a lesser degree, the fill factor value, as the reason for the improved performance. The higher voltagesseen in these wide gap materials grown at high substrate temperatures may be due to reduced recombination at the grain boundary of such absorber films. Solar cell results, absorber materials characterization, and experimental details are reported.

14 SOLAR ENERGY↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics: Preprint

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure pAr, was varied in the range of 6 - 20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions of the Mo films were strongly dependent on pAr, indicating a consistent and significant decrease in theMo film density pMo with increasing pAr. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. Dielectric functions of Mo were then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(InxGa1-x)Se2 (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for processmonitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using dielectric functions deduced from SE.

14 SOLAR ENERGY↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure p{sub Ar}, was varied in the range of 6-20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions {var_epsilon} of the Mo films were strongly dependent on p{sub Ar}, indicating a consistent and significant decrease in the Mo film density {rho}{sub Mo} with increasing p{sub Ar}. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. {var_epsilon} of Mo was then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(In{sub x}Ga{sub 1-x})Se{sub 2} (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for process monitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using {var_epsilon} deduced from SE.

14 SOLAR ENERGY↗

Recombination Kinetics and Stability in Polycrystalline Cu(In,Ga)Se2 Solar Cells

Time-resolved photoluminescence (TRPL) measurements indicate that bare Cu(In,Ga)Se{sub 2} (CIGS) films degrade when they are exposed to air or stored in nitrogen-purged dry boxes. The degradation significantly affects device performance and electro-optical measurements. Measuring films prior to degradation reveals long lifetimes and distinct recombination properties. For high-quality material, the surface recombination velocity at grain boundaries, bare CIGS surfaces, and CIGS/CdS interfaces is less than 10{sup 3} cm/s, and lifetime values are often greater than 50 ns. In high injection, CIGS has recombination properties similar to GaAs. On completed devices, charge-separation dynamics can be characterized.

14 SOLAR ENERGY↗

EE&RE; Session: CIGS (Presentation)

This project supports the Solar America Initiative by carrying out work on target topics identified for Photovoltaic Systems: (1) Improving cell and module efficiency of thin film Cu(In,Ga)Se2 materials; (2) Implementing the Science and Technology Facility (S&TF) and the Process Development and Integration Laboratory (PDIL) to facilitate laboratory/industry interaction in developing PV manufacturing technologies; (3) Addressing industrial issues in materials and manufacturing processes with the objective to lower the cost of PV power; (4) Providing technology transfer efforts to accelerate transition of thin film PV technology to market and deployment; (5) Assisting R&D efforts to asses and improve reliability and stability of thin film PV products; and (6) Assist the SAI TPPs in technical matters related to CIGS PV technology.

14 SOLAR ENERGY↗