Engineering topics

Conrad, E. W.

Publications and source records attributed to Conrad, E. W..

At least 19 records

NASA NTRS1979

Turbine engine altitude chamber and flight testing with liquid hydrogen

In the late fifties the Lewis Research Center evaluated experimentally the use of hydrogen using three different turbojet engines in altitude test chambers. One of these engines was later flown experimentally using liquid hydrogen fuel. This paper is a brief overview of the significant aspects of this exploratory research and gives a few implications of the results to modern turbine engines. A subsequent contract dealing with a positive displacement pump operating on liquid hydrogen is discussed and some aspects of liquid hydrogen propellant systems, reflected by rocket booster experience are treated briefly. Areas requiring further research and technology effort are delineated.

Conrad, E. W.↗

NASA NTRS1978

NASA engine system technology programs - An overview

The various propulsion systems technology programs are examined. The Stratospheric Cruise Emission Reduction program has the objective to explore and demonstrate advanced technology fuel preparation and combustion systems which produce very low emission levels, particularly with respect to the oxides of nitrogen, during high altitude cruising flight. Other programs considered include the Quiet, Clean, General Aviation Turbofan program, the Variable Cycle Engine Technology program, the Helicopter Transmission Technology program, the Broad Specification Fuels Technology program, the Engine Component Improvement program, the Advanced Turboprop Technology program, the Supersonic Cruise Propulsion Technology program, the Materials for Advanced Turbine Engines program, and the Aeroelasticity of Turbine Engines program.

Johnson, H. W.↗

NASA NTRS1975

Trends in aircraft noise control

Flight vehicles are characterized according to their manner of operation and type of propulsion system; and their associated sources of noise are identified. Available noise reduction technology as it relates to engine cycle design and to powerplant component design is summarized. Such components as exhaust jets, fans, propellers, rotors, blown flaps, and reciprocating-engine exhausts are discussed, along with their noise reduction potentials. Significant aircraft noise reductions are noted to have been accomplished by the application of available technology in support of noise certification rules. Further noise reductions to meet more stringent future noise regulations will require substantial additional technology developments. Improved analytical prediction methods, and well-controlled validation experiments supported by advanced-design aeroacoustic facilities, are required as a basis for an effective integrated systems approach to aircraft noise control.

Hubbard, H. H.↗

NASA NTRS1974

Quiet engine from NASA

Engine designs resulting from the NASA sponsored quiet engine program are described in terms of their possible use on the DC-8. These engines have high bypass ratios for low jet noise and low-speed, low-noise fans. Experiments were carried out on various fan designs with different tip speeds. The advantage of low tip speeds and high lift coefficients has been demonstrated. The engines are equipped with flight-standard nacelles with acoustic suppression. It is estimated that these improvements will reduce DC-8 noise by about 26EPNdB-29EPNdB.

Sanders, N. D.↗

NASA NTRS1974

Some injector element detail effects on screech in hydrogen-oxygen rockets

An experimental investigation was conducted to learn more about how the specific details of a concentric tube injection element affect the screech characteristics of a hydrogen-oxygen rocket engine. The four variables investigated were (1) impingement angle, (2) oxidizer tube blunt base thickness, (3) oxidizer tube recess and extension, and (4) oxidizer tube-annulus concentricity. Tests were made using a 27.34-cm (10.77-in.) diameter heat sink combustor at nominally 300-psia chamber pressure. All of the test variables were investigated using a 157 element circular pattern injector. Additional oxidizer tube recess tests were made with a 421 element hexagonal pattern injector. Tests were conducted over the oxidant-fuel ratio range of 4 to 6. Stability evaluation for each configuration was made using the hydrogen temperature rating technique. Several element configurations were also cold flow tested using nitrogen and water as simulants. The element detail changes resulted in changes in hydrogen injector pressure drop even though the physical injection area was constant for all similar tests in both hot firing and cold flow tests. These changes in injector pressure drop produced changes in combustion stability. The data were correlated with a modified version of a previously reported injection area ratio correlation. By interpreting changes in injector pressure drop as changes in injector hydrogen flow resistance, the data were compared with a hydrogen flow response stability model and were found to be in agreement.

Hannum, N. P.↗

NASA NTRS1973

Noise from turbomachinery.

This paper reviews turbomachinery noise from turbofan engines as typified by fan noise. The mechanisms and theories of fan noise are reviewed and concepts for its reduction, including acoustic suppresion are discussed. Correlations of the overall noise data from several full-scale fans tested at NASA-Lewis Research Center are presented as indicative of the current state-of-the-art. Estimates are presented to show economics versus reduced noise for two quieted experimental engines, one with subsonic and one with supersonic fan tip speed. Finally, some concepts that may have the potential to reduce fan noise are indicated.

Feiler, C. E.↗

NASA NTRS1973

Noise from turbomachinery

A review is made of turbomachinery noise from turbofan engines as typified by fan noise. The mechanisms and theories of fan noise are reviewed and concepts for its reduction, including acoustic suppression are discussed. Correlations of the overall noise data from several full-scale fans tested at NASA-Lewis Research Center are presented as indicative of the current state-of-the-art. Estimates are presented to show economics versus reduced noise for two quieted experimental engines, one with subsonic and one with supersonic fan tip speed. Finally, some concepts that may have the potential to reduce fan noise are indicated.

Feiler, C. E.↗

NASA NTRS1972

Jet aircraft engine noise reduction

The development of advanced technology to reduce the effects of aircraft flyover noise is described. The procedures are directed toward identifying and minimizing the noise sources in aircraft engines and to absorbing noises which cannot be eliminated. The economic impact resulting from reducing noise levels is examined. Improvements in engine noise reduction technology are discussed.

Conrad, E. W.↗

NASA NTRS1972

Jet aircraft engine noise reduction.

The major noise sources are considered together with the noise generation mechanisms involved and approaches for reducing or suppressing the generated noise. Important basic advances in engine noise reduction technology were made in connection with the NASA Quiet Engine program. The prospect for reducing the noise levels of future aircraft below that of the new wide-body jets is good. However, a significant penalty in the form of increased cost to the traveler is also to be expected as the aircraft noise levels are gradually decreased.

Conrad, E. W.↗

NASA NTRS1971

Submerged gas injector expels cryogenic liquids from tanks

Vaporizing small portion of cryogenic liquid into pressurizing gas reduces amount of pressurizing gas required to expel cryogenic liquid from tank. Specific example of injecting helium gas, stored at same temperature of liquid hydrogen, through submerged porous plate directly into liquid hydrogen is described.

Conrad, E. W.↗

NASA NTRS1971

Variable-area nozzle automatically controls fluid flow

Simple, passive nozzle requires no active control system to vary injection area. Injection area changes with changing pressure, thereby allowing greater flow as pressure increases. As pressure drop across nozzle is decreased, spring action of segments causes them to move inward, decreasing the flow area.

Conrad, E. W.↗

NASA NTRS1970

Resonance tube igniter

Reasonance induced in stoichiometric mixtures of gaseous hydrogen-oxygen produces temperatures /over 1100 deg F/ high enough to cause ignition. Resonance tube phenomenon occurs when high pressure gas is forced through sonic or supersonic nozzle into short cavity. Various applications for the phenomenon are discussed.

Conrad, E. W.↗

NASA NTRS1970