Engineering Papers⌕ Search

Engineering topics

Collins, Benjamin S.

Publications and source records attributed to Collins, Benjamin S..

At least 37 records · Page 2

Improvements to CTF for Modeling of Boiling Water Reactor Geometry and Operating Conditions

This report documents work done to improve CTF modeling of boiling water reactor (BWR) designs during FY 2020. Several improvements were made to the geometry modeling capabilities, including adding support for modeling of inlet flow orifices, axially varying large water rods, channel boxes with large corner round radii, and quarter symmetry models. Work was also done to improve on the numerical stability and run-time performance of CTF in Virtual Environment for Reactor Applications (VERA) for core-scale BWR problems. An outer iteration loop was implemented that ensures mass and energy are conserved before moving on to the next time step in the solution. The ability to use a direct solver for the pressure matrix was also added, which reduces the matrix solution error and improves code stability and run-time performance. Improvements to the pressure balance iteration loop were needed to allow CTF to be used in a coupled VERA solution of a model of Hatch that was developed. Finally, various improvements have led to a 2×reduction in the total VERA walltime for the Hatch model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Engineering scale molten salt corrosion and chemistry code development

A new engineering scale transport code Mole is described. Mole was developed using the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework for solving species transport problems in flowing liquid. It is applied to leaching of Cr from alloys into molten salts part a of a multi-physics, multi-scale approach for coupling chemistry with mechanical behavior modeling. Demonstrations of the leaching phenomenon were benchmarked to experimental data provided by the Molten Salt Reactor campaign and the results are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Impact of Radial Reflector Fidelity on Neutronics and Vessel Fluence Simulations

The Consortium for Advanced Simulation of Light Water Reactors is developing the Virtual Environment for Reactor Applications (VERA), and the MPACT code, which is the primary deterministic neutron transport solver in VERA, provides sub-pin level flux and power distributions as part of full-scale cycle depletion and analysis. In such calculations, an important aspect is the radial reflector treatment. To improve the fidelity of the radial reflector treatment, MPACT was extended to approximate the modeling of the reactor’s structural components such as the core shroud, barrel, neutron pads, and vessel. This work explores several modeling configurations with varying levels of fidelity and computational burden and assesses the importance of modeling fidelity on the eigenvalue and pin power distribution. Two two-dimensional (2-D) problems were analyzed to assess the impact on eigenvalue and pin power distributions with low-fidelity, coarse square cell reflector representations: (1) a Watts Bar Nuclear Plant Unit 1 (WBN1) quarter-core slice with depletion and (2) an AP1000 quarter-core slice. In this work, the analyses showed that the effect on eigenvalue is fairly small, but the effect on pin power is more pronounced, especially locally in the assemblies closest to the periphery, where the maximum pin power difference is nearly 3.5% in the AP1000 case. Two additional 2-D problems were used to assess the comparison between the low-fidelity coarse square cell treatment and a high-fidelity geometric representation that uses subpin material specification: (1) the same WBN1 quarter-core slice and (2) a representative model of the NuScale small modular reactor (SMR), which features a solid reflector design with moderator holes. These results demonstrate that even a coarse, low-fidelity representation adequately captures the necessary simulation characteristics. Last, these capabilities were applied to the 2-D WBN1 quarter-core depletion to assess the impact on vessel fluence using VeraShift. From adjoint calculations, pins along the periphery were observed to be of highest importance for fluence calculation, so the impact of the reflector representation in MPACT could theoretically substantially affect the predicted result. However, it was observed that the change in pin powers along the periphery minimally impacts the maximum vessel fluence with a difference within the statistical uncertainty but provides terrific insight on the sensitivity of the peripheral pins.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of CASL VERA for BWR analysis and application to accident tolerant SiC/SiC channel box

Application of the Virtual Environment for Reactor Applications (VERA) to BWR analysis is assessed in this paper by comparing results to those calculated using other widely-used modeling tools, namely the U.S. Nuclear Regulatory Commission’s PARCS/PATHS and the Serpent Monte Carlo particle transport code. Additionally, VERA is used to calculate 3-D temperature and fast neutron flux distributions in silicon carbide (SiC) fiber-reinforced, SiC matrix composite (SiC/SiC) BWR channel boxes, which are being studied as an Accident Tolerant Fuel core structural material concept. We found that the code-to-code comparisons were favorable, and the SiC/SiC channel box evaluation demonstrates the many advanced modeling features VERA provides while also highlighting the non-uniformity in fast neutron flux distributions that can play a role in potential SiC/SiC channel box deformation. Traditional BWR analysis tools do not have the calculation fidelity necessary for coupled assessment of flux and temperature gradients in a SiC/SiC channel box. VERA is a state-of-the-art modeling environment that was developed to increase the safety and economic competitiveness of nuclear power through improved modeling accuracy. While VERA has already been deployed in the nuclear industry for PWR applications, the current study is a vital initial step in the extensive development, validation, and verification that VERA must go through to be useful for BWR applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Simulation of the BEAVRS benchmark using VERA

The Virtual Environment for Reactor Applications (VERA) is being developed by the Consortium for the Advanced Simulation of Light Water Reactors (CASL). Here, VERA is used to perform the Benchmark for Evaluation and Validation of Reactor Simulations (BEAVRS), which provides two cycles’ worth of operating power history, along with a full, detailed description of the geometry, and measured data. Cycle 1 and 2 are simulated with VERA and the results are compared to the measured zero power physics tests, critical boron concentration, and flux maps.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Coupled fuel performance calculations in VERA and demonstration on Watts Bar unit 1, cycle 1

As the core simulator capabilities in the Virtual Environment for Reactor Applications (VERA) have become more mature and stable, increased attention has been focused on coupling Bison to provide fuel performance simulations. This technique has been a very important driver for the pellet-clad interaction challenge problem being addressed by the Consortium for Advanced Simulation of Light Water Reactors (CASL). Here, two coupling approaches are demonstrated on quarter core problems based on Watts Bar Nuclear Plant Unit 1, Cycle 1: (1) an inline approach in which a one-way coupling is used between neutronics/thermal hydraulics (through MPACT/CTF) and fuel performance (through Bison) but no fuel temperature information is passed back to MPACT/CTF, and (2) a two-way approach (coupled) in which the fuel temperature is passed from Bison to MPACT/CTF. In both approaches, power and temperature distributions from MPACT/CTF are used to inform the Bison simulations for each rod in the core.The demonstrations presented here are the first integrated fuel performance simulations in VERA, which opens many possibilities for future work, including applications to accident-tolerant fuel efforts and transient simulations, which are of critical importance to CASL. These demonstrations also highlight the potential to move away from the current Bison-informed fuel temperature lookup table approach, which is the default in MPACT/CTF simulations, if performance improvements are made in the near future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of control blade insertion on the deformation behavior of SiC-SiC channel boxes in BWRs

This article describes the analysis of distortion of a silicon carbide fiber-reinforced, silicon carbide matrix (SiC-SiC) composite channel box under in-reactor conditions of a boiling water reactor (BWR). The BWR core has significant gradients in the fast neutron flux across the channel box due to the presence of water rods within the fuel assemblies, and these gradients increase further with the insertion of control blades. As a result of the temperature and neutron flux dependent irradiation-induced swelling of SiC, the SiC-SiC composite channel box can undergo distortion. In this work, we evaluate the SiC-SiC channel box distortion for three different control blade positions. This analysis is based on the neutron flux and temperature distributions in the BWR core calculated using the neutronics code MPACT and thermal-hydraulics code CTF. This calculation is coupled through temperature feedback. Subsequently, we have performed structural analysis based on the calculated neutron flux and temperature distributions to determine the deformation and stress development in the channel box. The structural analysis was performed using the fuel performance modeling code BISON and the commercial finite element analysis software Abaqus. The results indicate that large gradients in fast neutron flux (up to 35–40% across a single axial level) will develop across the channel box. Due to these gradients, the channel box will undergo time-dependent bending for all the control blade positions in the assembly. The time-dependent bowing behavior is dominated by the transient swelling of SiC-SiC material under non-uniform neutron flux, and changes with variation in the control blade position. The bending will cause temporary interference between the channel box and control blade, and the interference is expected to be most severe for the fully inserted control blade position. The developed stresses due to differential swelling in the channel box exceed the proportional limit stress of the material, which may cause matrix microcracking in the channel box. However, the stresses remain below the tensile strength of the material, and therefore, development of a full, through-thickness crack in the channel box is not expected. Finally, further work is recommended to explore and evaluate the mitigation strategies.

42 ENGINEERING↗

Impact of Control Blade Insertion on the Deformation Behavior of SiC-SiC Channel Boxes in Boiling Water Reactors

This report describes the analysis of distortion of a Silicon carbide fiber-reinforced silicon carbide matrix (SiC-SiC) composite channel box under in-reactor conditions of a boiling water reactor (BWR). The BWR core has significant gradients in the fast neutron flux across the channel box due to the presence of water rods within the fuel assemblies, and these gradients increase further with the insertion of control blades. As a result of temperature and neutron flux dependent irradiation induced swelling of SiC, the SiC-SiC composite channel box can undergo significant distortion. In this work, we evaluate the SiC-SiC channel box distortion for three different control blade positions. This analysis is based on the neutron flux and temperature distributions in the BWR core calculated using the neutronics code MPACT and thermalhydraulics code CTF. This calculation is coupled through temperature feedback. Subsequently, we have performed structural analysis based on the calculated neutron flux and temperature distributions, to determine the deformation and stress development in the channel box. The structural analysis was performed using the fuel performance modeling code BISON and the commercial finite element analysis software Abaqus. The results indicate that the channel box will undergo time dependent lateral bowing for all the control blade positions in the assembly. The bowing behavior is dominated by the swelling of SiC-SiC material under non-uniform neutron flux, and changes with variation in the control blade position. The lateral bending will cause a temporary interference between the channel box and the control blade. The developed stresses exceed the proportional limit stress of the material, which may cause matrix microcracking in the channel box. However, the stresses remain below the ultimate tensile strength of the material, and therefore, development of a full, through thickness crack in the channel box is not expected.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ex-Core Radiation Transport Modeling with VERA User Manual

It is important to be able to accurately predict the neutron flux outside the immediate reactor core for a variety of safety and material analyses. Monte Carlo radiation transport calculations are required to produce these high–fidelity ex-core responses. The Virtual Environment for Reactor Applications (VERA) provides the automated capability to launch independent Shift fixed-source and eigenvalue Monte Carlo (MC) calculations for user-specified state points during a standard Virtual Environment for Reactor Applications (VERA) calculation. VERA couples MPACT with COBRA-TF (CTF) to Shift to perform ex-core tallies for multiple state points concurrently, with each component capable of parallel execution on independent processor domains. In these ex-core calculations, MPACT is coupled to CTF and performs the in-core depletion and heat transfer calculation, followed by a fixed-source Shift transport calculation including ex-core regions to produce ex-core responses. The fission source, fuel pin temperatures, moderator temperature and density, boron concentration, and fuel pin depleted isotopic compositions can be transferred to Shift from the MPACT calculation. Specifically, VERA performs fluence calculations in the core barrel outward to the end of the pressure vessel and detector response calculations in ex-core detectors. It also performs the requested tallies in any user-defined ex-core regions. VERA takes advantage of the General Geometry (GG) package in Shift. This gives VERA the flexibility to explicitly model features outside the core barrel, including detailed vessel models, detectors, and power plant details. A very limited set of experimental and numerical benchmarks is available for ex-core simulation comparison. The Consortium for Advanced Simulation of Light Water Reactors has developed a set of ex-core benchmark problems to include as part of the VERA verification and validation set of problems. The ex-core capability in VERA has been tested on small representative assembly problems, multi-assembly problems, as well as quarter-core and full-core problems. VERA View has also been extended to visualize these vessel fluence results from VERA. This manual serves to present a guide to VERA users about the methodology behind ex-core calculations and the details of input, output, and analysis of results from these calculations. Details in this version of the manual are based on features in VERA 4.0.1.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Use of Neutron Flux Calculated by Shift in a Grizzly Reactor Pressure Vessel Fracture Simulation

The reactor pressure vessel (RPV) plays the critical role of containing the reactor and coolant in a light water reactor nuclear power plant, and must be able to safely perform this function under a variety of normal and off-normal transient loading conditions. The RPV is subjected to harsh environmental conditions (elevated temperature and high neutron flux) whenever the plant is operating, which leads to embrittlement of the steel over time. RPVs contain populations of flaws introduced during the manufacturing process, and the primary safety concern is that during a transient event, a fracture could initiate at the site of one of these flaws and lead to rupture of the RPV. RPVs are very rugged structures, and the probability of this occurring is very low, but as the RPV's steel becomes embrittled over time, its resistance to fracture decreases and this becomes more likely. Assessing the likelihood of RPV fracture during a transient event involves performing a probabilistic fracture mechanics analysis, in which random sampling procedures are used to assess the probability of fracture of a population of flaws. Grizzly offers unique capabilities for modeling the RPV using 1D, 2D, or 3D representations, taking advantage of parallel computing for this type of analysis. One of the important inputs to Grizzly is the spatial distribution of the neutron fluence, which has a large impact on the material embrittlement, and should thus be characterized as accurately as possible. The VERA core simulator developed by the CASL program takes advantage of high performance computing resources to perform high-fidelity multiphysics simulations of reactor physics, including the effects of neutron transport, fuel performance, and thermal hydraulics. Recently a capability was developed to also evaluate neutron fluxes away from the reactor core through the Shift code. This allows for a detailed 3D map of the spatial variation of the fluence in components such as the RPV to be computed, which is ideal for use with Grizzly. This report documents a procedure developed to use the fluences computed in Shift in a Grizzly simulation, which allows for improved realisim in the prediction of the effects of environmental exposure on propensity for reactor pressure vessel fracture. This capability demonstrated on RPVs with multiple types of configurations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Reactor performance and safety characteristics of ThN-UN fuel concepts in a PWR

The reactor performance and safety characteristics of mixed thorium mononitride (ThN) and uranium mononitride (UN) fuels in a pressurized water reactor (PWR) are investigated to discern the potential nonproliferation, waste, and accident tolerance benefits provided by this fuel form. In this paper, we present results from an initial screening of mixed ThN-UN fuels in normal PWR operating conditions and compares their reactor performance to UO 2 in terms of fuel cycle length, reactivity coefficients, and thermal safety margin. ThN has been shown to have a significantly greater thermal conductivity than UO 2 and UN. Admixture with a UN phase is required because thorium initially contains no fissile isotopes. Results from this study show that ThN-UN mixtures exist that can match the cycle length of a UO 2 -fueled reactor by using 235 U enrichments greater than 5% but less than 20% in the UN phase. Reactivity coefficients were calculated for UO 2 , UN, and ThN-UN mixtures, and it was found that the fuel temperature and moderator temperature coefficients of the nitride-based fuels fall within the acceptable limits specified by the AP1000 Design Control Document. Reduced soluble boron and control rod worth for these fuel forms indicates that the shutdown margin may not be sufficient, and design changes to the control systems may need to be considered. The neutronic impact of 15 N enrichment on reactivity coefficients is also included. Due to the greatly enhanced thermal conductivity of the nitride-based fuels, the UN and ThN-UN fuels provide additional margin to fuel melting temperature relative to UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhancements to the Subplane Capability in MPACT

In recent years, much of the development effort for the Virtual Environment for Reactor Applications (VERA) has been devoted to improving performance and targeting industry-class computers. This includes reducing both runtime (improving efficiency) and core-count requirements to enable simulation on smaller machines. In MPACT, in particular, many aspects of the neutronic iteration strategy have been evaluated and improved, such as the subgroup and method of characteristics (MOC) runtimes, and many efforts have focused on improving the coarse mesh finite difference (CMFD) runtime, which has become a dominant component of the runtime as other aspects have been improved.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Subray Method of Characteristics

The MPACT code is being jointly developed by the University of Michigan and Oak Ridge National Laboratory. It uses the 2-D/1-D method to solve neutron transport problems for reactors. The 2-D/1-D method decomposes the problem into a stack of 2-D planes and uses a high-fidelity transport method to resolve all heterogeneity in each plane. These planes are then coupled axially, using a lower-order solver. With this scheme, three-dimensional (3-D) solutions to the transport equation can be obtained at a much lower cost. The 2-D/1-D method assumes that the materials are axially homogeneous for each 2-D plane. Violation of this assumption requires homogenization, which can significantly reduce the accuracy of the calculation. This work proposes the subray method of characteristics (subray MOC) as a solution to this problem. Subray MOC is a subgrid method that allows local heterogeneities to be directly resolved by method of characteristics while treating the rest of the 2-D plane as axially uniform. This improves the accuracy in the neighborhood of the heterogeneity while minimizing the increase in run time. The method was applied to variations of the C5G7 benchmark problems and compared with a previously developed subgrid method called the subplane collision probabilities (SCP) method. Comparisons were made among results obtained using subray MOC, the SCP method, and no subgrid method. Subray MOC consistently performed best, reducing maximum 3-D power distribution errors from as high as 30% to 2% or less. Moreover, it consistently outperformed the SCP method with run times that were shorter than the reference calculations.

2-D/1-D method↗

Neutron Capture Energies for Flux Normalization and Approximate Model for Gamma-Smeared Power

The Consortium for Advanced Simulation of Light Water Reactors (CASL) Virtual Environment for Reactor Applications (VERA) neutronics simulator MPACT has used a single recoverable fission energy for each fissionable nuclide assuming that all recoverable energies come only from fission reaction, for which capture energy is merged with fission energy. This approach includes approximations and requires improvement by separating capture energy from the merged effective recoverable energy. This report documents the procedure to generate recoverable neutron capture energies and the development of a program called CapKappa to generate capture energies. Recoverable neutron capture energies have been generated by using CapKappa with the evaluated nuclear data file (ENDF)/B-7.0 and 7.1 cross section and decay libraries. The new capture kappas were compared to the current SCALE-6.2 and the CASMO-5 capture kappas. These new capture kappas have been incorporated into the Simplified AMPX 51- and 252-group libraries, and they can be used for the AMPX multigroup (MG) libraries and the SCALE code package. The CASL VERA neutronics simulator MPACT does not include a gamma transport capability, which limits it to explicitly estimating local energy deposition from fission, neutron, and gamma slowing down and capture. Since the mean free path of gamma rays is typically much longer than that for the neutron, and the total gamma energy is about 10% to the total energy, the gamma-smeared power distribution is different from the fission power distribution. Explicit local energy deposition through neutron and gamma transport calculation is significantly important in multi-physics whole core simulation with thermal-hydraulic feedback. Therefore, the gamma transport capability should be incorporated into the CASL neutronics simulator MPACT. However, this task will be timeconsuming in developing the neutron induced gamma production and gamma cross section libraries. This study is to investigate an approximate model to estimate gammasmeared power distribution without performing any gamma transport calculation. A simple approximate gamma smearing model has been investigated based on the facts that pinwise gamma energy depositions are almost flat over a fuel assembly, and assembly-wise gamma energy deposition is proportional to kappa-fission energy deposition. The approximate gamma smearing model works well for single assembly cases, and can partly improve the gamma smeared power distribution for the whole core model. Although the power distributions can be improved by the approximate gamma smearing model, still there is an issue to explicitly obtain local energy deposition. A new simple approach or gamma transport/diffusion capability may need to be incorporated into MPACT to estimate local energy deposition for more robust multi-physics simulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multi-Physics Simulations for Molten Salt Reactor Evaluation: Chemistry Modeling and Database Development

To aid in design and licensing of molten salt reactors, a framework integrating the complex interaction of reactor neutronics, thermal hydraulics, and chemistry is being developed within the Department of Energy Advanced Reactor Technology Program’s Molten Salt Reactor (MSR) campaign. The challenges of integrating thermochemical and thermophysical behavior into a multi-physics reactor simulations include the following: (1) population of data needed for refinement of current models and development of nonexistent models through experimental measurements, first principles calculations, and development of a machine learning approach (2) thermochemical and thermophysical model development, (3) further development of Thermochimica, an open-source efficient equilibrium solver used to link thermochemical models to the multi-physics code, (4) a framework for integrating kinetic phenomena: nucleation, precipitation, mass/heat transport, and corrosion models, and (5) a computational environment to efficiently utilize the data and models within a multi-physics modeling tool. These challenges are being addressed through a collaboration among Oak Ridge National Laboratory, Argonne National Laboratory, the University of South Carolina, and the University of Ontario Institute of Technology.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Subplane collision probabilities method applied to control rod cusping in 2D/1D

The MPACT code is being jointly developed by the University of Michigan and Oak Ridge National Laboratory. It uses the 2D/1D method to solve neutron transport problems for reactors. The 2D/1D method decomposes the problem into a stack of 2D planes, and uses a high fidelity transport method to resolve all heterogeneity in each plane. These planes are then coupled axially using a lower order solver. Using this scheme, 3D solutions to the transport equation can be obtained at a much lower cost.One assumption made by the 2D/1D method is that the materials are axially homogeneous for each 2D plane. Violation of this assumption requires homogenization, which can significantly reduce the accuracy of the calculation. This paper presents two new subgrid methods to address this issue. The first method is polynomial decusping, a simple correction used to address control rods partially inserted into a 2D plane. The second is the subplane collision probabilities method, which is a more accurate, more robust subgrid method that can be applied to other axial heterogeneities.Each method was applied to a variety of problems. Results were compared to fine mesh solutions which had no axial heterogeneity and to Monte Carlo reference solutions generated using KENO-VI. It was shown that the polynomial decusping method was effective in many cases, but it had some limitations, with 3D pin power errors as high as 25% compared to KENO-VI. In conclusion, the subplane collision probabilities method performed much better, lowering the maximum pin power error to less than 5% in every calculation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗