Engineering topics

Colborn, B. L.

Publications and source records attributed to Colborn, B. L..

41 records · Page 3

NASA NTRS1992

Mitigation of adverse environmental effects on lunar-based astronomical instruments

The galactic cosmic-ray flux incident on the moon was examined for its potential adverse impact on the performance of the large lunar telescope (LLT) proposed as a part of NASA's Space Exploration Initiative (SEI). Noise produced by the cosmic-ray flux in the charge coupled devices to be used as the primary photodetector in the telescope was estimated. It was calculated that approximately 2.5 m of regolith would provide the shielding necessary to reduce the noise to an acceptable level. Dust is an omnipresent environmental concern for any human-assisted or robotic scientific instruments deployed on the moon. The degree to which dust poses an operational risk to the telescope was examined. Three potential methods for reducing this risk were identified: locating scientific instruments at remote locations; utilizing a prepared, dust-free site for all rocket activities; and covering the optics during high-risk times.

Johnson, Charles L.↗

NASA NTRS1991

Radiation calculations and comparisons with data

In conjunction with the analysis of data from the Long Duration Exposure Facility (LDEF) ionizing radiation dosimetry, a calculation program was established to aid in data interpretation and to assess the accuracy of current radiation environments and effects models for future mission applications. Initial estimates of LDEF exposure to trapped, galactic, and atmospheric (albedo) radiation sources were made, and the radiation environment (primary and secondary particle spectra) and several radiation effects (induced radioactivity and dose) for varying amounts of LDEF shielding were calculated for a simplified LDEF mass model. Preliminary comparisons of the calculated results were made with the induced radioactivity measurements for several LDEF parts and with preliminary dose data from several experiments (P0004, P0006, and M0004). Predictions were compared with the radioactivity induced in the aluminum clamps holding the experiment trays and in the stainless steel trunnions to test a recently developed theory of trapped proton anisotropy.

Armstrong, T. W.↗

NASA NTRS1991

LDEF geometry/mass model for radiation analyses

A 3-D geometry/mass model of Long Duration Exposure Facility (LDEF) was generated to aid in the interpretation of ionizing radiation experiments relative to the influence of varying shielding distributions around the dosimetry, and to allow more definitive calculations and comparisons with the measured data. This model takes into account the major individual structural members of the LDEF spacecraft, the mass in each experiment tray, and, for selected trays containing ionizing radiation dosimetry, major parts within the tray are modeled. The geometry/mass model, together with a ray tracing algorithms, was programmed for use both as a stand alone code in determining 3-D shielding distributions at dosimetry locations, and as a geometry module that can be interfaced with radiation transport codes.

Colborn, B. L.↗

NASA NTRS1990

Characteristics of trapped proton anisotropy at Space Station Freedom altitudes

The ionizing radiation dose for spacecraft in low-Earth orbit (LEO) is produced mainly by protons trapped in the Earth's magnetic field. Current data bases describing this trapped radiation environment assume the protons to have an isotropic angular distribution, although the fluxes are actually highly anisotropic in LEO. The general nature of this directionality is understood theoretically and has been observed by several satellites. The anisotropy of the trapped proton exposure has not been an important practical consideration for most previous LEO missions because the random spacecraft orientation during passage through the radiation belt 'averages out' the anisotropy. Thus, in spite of the actual exposure anisotropy, cumulative radiation effects over many orbits can be predicted as if the environment were isotropic when the spacecraft orientation is variable during exposure. However, Space Station Freedom will be gravity gradient stabilized to reduce drag, and, due to this fixed orientation, the cumulative incident proton flux will remain anisotropic. The anisotropy could potentially influence several aspects of Space Station design and operation, such as the appropriate location for radiation sensitive components and experiments, location of workstations and sleeping quarters, and the design and placement of radiation monitors. Also, on-board mass could possible be utilized to counteract the anisotropy effects and reduce the dose exposure. Until recently only omnidirectional data bases for the trapped proton environment were available. However, a method to predict orbit-average, angular dependent ('vector') trapped proton flux spectra has been developed from the standard omnidirectional trapped proton data bases. This method was used to characterize the trapped proton anisotropy for the Space Station orbit (28.5 degree inclination, circular) in terms of its dependence on altitude, solar cycle modulation (solar minimum vs. solar maximum), shielding thickness, and radiation effect (silicon rad and rem dose).

Armstrong, T. W.↗

NASA NTRS1990

Scoping estimates of the LDEF satellite induced radioactivity

The Long Duration Exposure Facility (LDEF) satellite was recovered after almost six years in space. It was well-instrumented with ionizing radiation dosimeters, including thermoluminescent dosimeters, plastic nuclear track detectors, and a variety of metal foil samples for measuring nuclear activation products. The extensive LDEF radiation measurements provide the type of radiation environments and effects data needed to evaluate and help resolve uncertainties in present radiation models and calculational methods. A calculational program was established to aid in LDEF data interpretation and to utilize LDEF data for assessing the accuracy of current models. A summary of the calculational approach is presented. The purpose of the reported calculations is to obtain a general indication of: (1) the importance of different space radiation sources (trapped, galactic, and albedo protons, and albedo neutrons); (2) the importance of secondary particles; and (3) the spatial dependence of the radiation environments and effects expected within the spacecraft. The calculational method uses the High Energy Transport Code (HETC) to estimate the importance of different sources and secondary particles in terms of fluence, absorbed dose in tissue and silicon, and induced radioactivity as a function of depth in aluminum.

Armstrong, Tony W.↗