Engineering topics

Colavita, M. M.

Publications and source records attributed to Colavita, M. M..

46 records · Page 3

NASA NTRS1992

Long-baseline optical and infrared stellar interferometry

The history and the current status of optical and infrared long-baseline interferometry are reviewed. In particular, attention is given to Michelson interferometry; the Mark III stellar interferometer and its applications to astrometry, measurement of stellar diameters, and observations of binary stars; and advanced techniques. The discussion then focuses on astrometry and imaging with space interferometers. Finally, the future of long-baseline interferometry is briefly discussed with particular reference to the interferometry of the moon.

Shao, M.↗

NASA NTRS1991

Angular diameter measurements of stars

Angular diameters determined with the Mark III Optical Interferometer are presented for 12 stars at wavelengths of 450 and 800 nm. The uniform disk diameters resulting from fits to the visibility observations have rms residuals of order 1 percent for the 800 nm measurements and less than 3 percent for the 450 nm measurements. The improvement over previous observations with this instrument is due to improved data analysis and the use of a wider range of baseline lengths. An analysis of the calibration systematics for the Mark III Optical Interferometer is included. There is good agreement between these measurements and previously published data. The changes in uniform disk diameter between wavelengths of 450 and 800 nm agree with models of stellar atmospheres.

Mozurkewich, D.↗

NASA NTRS1991

Optical system design for a Lunar Optical Interferometer

The moon offers particular advantages for interferometry, including a vacuum environment, a large stable base on which to assemble multi-kilometer baselines, and a cold nighttime temperature to allow for passive cooling of optics for high IR sensitivity. A baseline design for a Lunar Optical Interferometer (LOI) which exploits these features is presented. The instrument operates in the visible to mid-IL region, and is designed for both astrometry and synthesis imaging. The design uses a Y-shaped array of 12 siderostats, with maximum arm lengths of about 1 km. The inner siderostats are monitored in three dimensions from a central laser metrology structure to allow for high precision astrometry. The outer siderostats, used primarily for synthesis imaging, exploit the availability of bright reference stars in order to determine the instrument geometry. The path delay function is partitioned into coarse and fine components, the former accomplished with switched banks of range mirrors monitored with an absolute laser metrology system, and the latter with a short cat's eye delay line. The back end of the instrument is modular, allowing for beam combiners for astrometry, visible and IR synthesis imaging, and direct planet detection. With 1 m apertures, the instrument will have a point-source imaging sensitivity of about 29 mag; with the laser metrology system, astrometry at the microarcsecond level will be possible.

Colavita, M. M.↗

NASA NTRS1991

Prototype high speed optical delay line for stellar interferometry

The long baselines of the next-generation ground-based optical stellar interferometers require optical delay lines which can maintain nm-level path-length accuracy while moving at high speeds. NASA-JPL is currently designing delay lines to meet these requirements. The design is an enhanced version of the Mark III delay line, with the following key features: hardened, large diameter wheels, rather than recirculating ball bearings, to reduce mechanical noise; a friction-drive cart which bears the cable-dragging forces, and drives the optics cart through a force connection only; a balanced PZT assembly to enable high-bandwidth path-length control; and a precision aligned flexural suspension for the optics assembly to minimize bearing noise feedthrough. The delay line is fully programmable in position and velocity, and the system is controlled with four cascaded software feedback loops. Preliminary performance is a jitter in any 5 ms window of less than 10 nm rms for delay rates of up to 28 mm/s; total jitter is less than 10 nm rms for delay rates up to 20 mm/s.

Colavita, M. M.↗

NASA NTRS1990

Wide-angle astrometry with the Mark III stellar interferometer

Astrometric measurements made with the Mark III stellar interferometer on five nights in August-September 1988 yielded average formal 1-sigma errors for 12 FK5 stars of 6 mas in declination and 10 mas in right ascension. This improvement in precision over previously reported measurements with this instrument made in 1986 is attributable to several factors: a second 12 m baseline; oriented E-S, was added to the instrument to improve the determination of right ascension; two-color analysis was included in the data-reduction process, along with a new central-fringe identification algorithm using three spectral channels, in order to reduce atmospheric errors; thermal control was greatly improved; and changes were made to observational procedures and hardware to monitor variations in the delay offset due to residual thermal drifts. Approximately half of the new positions are within 50 mas of their FK5 positions. However, an extended series of measurements are needed to ascertain the accuracy that can be achieved by interferometry.

Shao, M.↗

NASA NTRS1990

Apparent orbit of the spectroscopic binary Beta Arietis with the time Mark III Stellar Interferometer

The spectroscopic binary Beta Ari has been directly resolved with the Mark III Stellar Interferometer. Observations in 1988 were analyzed to determine the visual orbit of the system with the following results: eccentricity = 0.903 +/- 0.012, semimajor axis = 0.0361 +/- 0.0003 arcsec, inclination = 44.7 +/- 1.3 deg, longitude of periastron = 209.1 deg +/- 1.2 deg, position angle of ascending node = 79.1 deg +/- 0.8 deg. The measured magnitude difference between two components, Delta m = 2.63 +/- 0.22 at 800 nm, yields individual visual magnitudes of m(v1) = 2.70 +/- 0.02 and m(v2) = 5.80 +/- 0.20. Combined with data from spectroscopic observations, masses M1 = (2.34 +/- 0.10) solar masses, M2 = (1.34 +/- 0.07) solar masses, and geometrical parallax pi = 0.053 arcsec +/- 0.002 arcsec are derived. These results demonstrate that both components of Beta Ari agree well with the empirical mass-luminosity relation.

Pan, X. P.↗

NASA NTRS1990

Optical observations of close binaries with the Mark III Stellar Interferometer

For the first time, four spectroscopic binaries have been directly resolved with the Mark III Stellar Interferometer. Observations in 1988 and 1989 were analyzed, and visual orbits for four binaries have been determined. The semimajor axes for Beta Tri, Alpha Equ, Alpha And and Beta Ari are approximately 0.008 arcsec, 0.012 arcsec, 0.024 arcsec and 0.037 arcsec, respectively. The magnitude differences between two components are 0.5, 0.7, 1.8 and 2.6 mag, respectively. All of the orbital elements for Alpha And and Beta Ari were determined from interferometric data only, and agree well with spectroscopic observations. Predictions of relative position between the two components for these binaries are consistent with the measurements to less than 0.001 arcsec. Combined with data from spectroscopy, masses and distance for the double-lined spectroscopic binary Beta Ari are derived, and the results indicate that both components of Beta Ari agree well with the empirical mass-luminosity relation.

Pan, X. P.↗

NASA NTRS1990

Optical diameters of stars measured with the Mt. Wilson Mark III interferometer

Reliable stellar angular diameters can now be determined using the Mark III Optical Interferometer located on Mt. Wilson, California. The Mark III is a Michelson Interferometer capable of measuring the interferometric fringe visibility for stars using interferometer baselines varying from 3 to 31.5 meters in length. Angular diameters measured with the Mark III Optical Interferometer are presented for 12 stars at wavelengths of 450 and 800 nm.

Simon, R. S.↗

NASA NTRS1988

The Mark III stellar interferometer

The Mark III interferometer is an operational long baseline stellar interferometer on Mt. Wilson with four-possible baseline configurations from 9m NE-SW to 20m N-S. The interferometer was designed to be a highly automated astronomical instrument to measure stellar positions and diameters to a magnitude limit of seven. Initial fringe observations were made in September 1986 with a 12-m N-S baseline. In the following months, semi-automated astrometric and stellar diameter measurements were also made. This paper describes the hardware and software components of the instrument and its operational characteristics. The interferometer has several novel features. One is the use of optimal estimation and control algorithms (e.g. Kalman filters) in the control loops. Another is the ability to operate both as a closed-loop phased interferometer and eventually as an open-loop or absolute coherent interferometer. High thermal stability and mechanical accuracy should permit the instrument to point blind at an astronomical object and maintain optical path equality to within the limits set by the atmosphere. In this absolute interferometric mode of operation, it should be possible to observe faint astronomical objects that are too dim for phase tracking. In theory, measurements of amplitude, group delay, and closure phase will be possible to 14 mag.

Shao, M.↗

NASA NTRS1985

Planetary searches using optical astrometric interferometers

The detectability of planets is discussed, and observations made with an astrometric interferometer (AI) at Mount Wilson are presented. Planets are detectable as a result of their periodic perturbation of the position of a central observable star. This detection requires relative astrometric accuracies of about 3 x 10 to the -4th for Jovian planets and about 3 x 10 to the -7th arcsec for terrestrial planets. The principles governing astrometric interferometry are explained, and it is conjectured that a two-color optical AI on earth should be capable of about 0.0001 arcsec rms accuracy for stars brighter than magnitude 7-10; small one-color space systems should achieve at least 0.00001 arcsec. Owing to atmospheric turbulence, two-color systems permit correction every few milliseconds for the random wavefront tilt. A 3.4-meter baseline interferometer on Mount Wilson has demonstrated arcsec rms fluctuations of about 0.02 for 1-sec samples. Space-based optical astrometric interferometry is also discussed.

Staelin, D. H.↗