Engineering topics

Clemmons, James I., Jr.

Publications and source records attributed to Clemmons, James I., Jr..

4 records

NASA NTRS1994

Optical position measurement for a large gap magnetic suspension system: Design and performance analysis

An optical measurement system (OMS) has been designed and tested for a large gap magnetic suspension system (LGMSS). The LGMSS will be used to study control laws for magnetic suspension systems for vibration isolation and pointing applications. The LGMSS features six degrees of freedom and consists of a planar array of electromagnets that levitate and position a cylindrical element containing a permanent magnet core. The OMS provides information on the location and orientation of the element to the LGMSS control system to stabilize suspension. The hardware design of this optical sensing system and the tracking algorithms are presented. The results of analyses and experiments are presented that define the accuracy limits of the optical sensing system and that quantify the errors in position estimation.

Welch, Sharon S.↗

NASA NTRS1990

Frequency-Domain Signal Processor For Laser Velocimeter

Dynamic range and accuracy increased. New signal processor for laser-velocimeter (LV) applications overcomes major limitations of present signal processors. System requires no input-signal conditioning other than that provided by amplifiers; it operates in instantaneous mode at signal levels from bursts containing as few as 150 photons down to photon-resolved regime in averaging mode. Digital value of signal-burst frequency sent to external computer system for conversion to value of absolute frequency. Residual turbulence intensity 0.2 percent, with little dependence on signal-to-noise ratio.

Meyers, James F.↗

NASA NTRS1987

Frequency domain laser velocimeter signal processor: A new signal processing scheme

A new scheme for processing signals from laser velocimeter systems is described. The technique utilizes the capabilities of advanced digital electronics to yield a smart instrument that is able to configure itself, based on the characteristics of the input signals, for optimum measurement accuracy. The signal processor is composed of a high-speed 2-bit transient recorder for signal capture and a combination of adaptive digital filters with energy and/or zero crossing detection signal processing. The system is designed to accept signals with frequencies up to 100 MHz with standard deviations up to 20 percent of the average signal frequency. Results from comparative simulation studies indicate measurement accuracies 2.5 times better than with a high-speed burst counter, from signals with as few as 150 photons per burst.

Meyers, James F.↗

NASA NTRS1987

A high speed buffer for LV data acquisition

The laser velocimeter (autocovariance) buffer interface is a data acquisition subsystem designed specifically for the acquisition of data from a laser velocimeter. The subsystem acquires data from up to six laser velocimeter components in parallel, measures the times between successive data points for each of the components, establishes and maintains a coincident condition between any two or three components, and acquires data from other instrumentation systems simultaneously with the laser velocimeter data points. The subsystem is designed to control the entire data acquisition process based on initial setup parameters obtained from a host computer and to be independent of the computer during the acquisition. On completion of the acquisition cycle, the interface transfers the contents of its memory to the host under direction of the host via a single 16-bit parallel DMA channel.

Cavone, Angelo A.↗