Engineering topics
Chun, W.
Publications and source records attributed to Chun, W..
Airborne Precipitation and cloud Radar (APR 3) observations during CAMP2EX
No abstract provided
Performance of direct methanol fuel cells with sputter-deposited anode catalyst layers
Performance of direct methanol fuel cells with sputter-deposited Pt-Ru anodes was investigated.
Design and Operation of an Electrochemical Methanol Concentration Sensor for Direct Methanol Fuel Cell Systems
The development of a 150-Watt packaged power source based on liquid feed direct methanol fuel cells is being pursued currently at the Jet propulsion Laboratory for defense applications. In our studies we find that the concentration of methanol in the fuel circulation loop affects the electrical performance and efficiency the direct methanol fuel cell systems significantly. The practical operation of direct methanol fuel cell systems, therefore, requires accurate monitoring and control of methanol concentration. The present paper reports on the principle and demonstration of an in-house developed electrochemical sensor suitable for direct methanol fuel cell systems.
Thin Film Catalyst Layers for Direct Methanol Fuel Cells
One of the primary obstacles to the widespread use of the direct methanol fuel cell (DMFC) is the high cost of the catalyst. Therefore, reducing the catalyst loading well below the current level of 8-12 mg/cm 2 would be important to commercialization. The current methods for preparation of catalyst layers consisting of catalyst, ionomer and sometimes a hydrophobic additive are applied by either painting, spraying, decal transfer or screen printing processes. Sputter deposition is a coating technique widely used in manufacturing and therefore particularly attractive. In this study we have begun to explore sputtering as a method for catalyst deposition. Present experiments focus on Pt-Ru catalyst layers for the anode.
Design and Operation of an Electrochemical Methanol Sensor for Direct Methanol Fuel Cell Systems
Explore the source record for details and available documents.
Design and Operation of an Electrochemical Methanol Concentration Sensor for Direct Methanol Fuel Cell Systems
The design and operation of a methanol concentration sensor suitable for use with direct methanol fuel cells is described.
Recent Advances in Direct Methonal Fuel Cells
This paper summarizes some of the recent progress in the development of cells, stacks, and systems.
Factors Affecting the Design of Direct Methanol Fuel Cell Systems
Direct methanol fuel cell based power systems are being developed as alternate power sources for portable applications under the sponsorship of DARPA.
Automated Instrumentation for Continuous Monitoring of the Dielectric Properties of Woody Vegetation: System Design, Implementation and Selected In Situ Measurements
Design and implementation of a system for the automated and continous in situ monitoring of the dielectric constant of woody vegetation tissue is presented.
Commercialization of a Direct Methanol Fuel Cell System
This paper describes a major breakthrough in energy technology developed at the Jet Propulsion Laboratory that can be used in a wide variety of portable, remote, and transportation applications without polluting the environment. The status, performance, and design considerations of the JPL non-polluting, direct methanol, fuel cell system for consumer equipment and transportation applications are reported herein. This new fuel cell technology utilizes the direct oxidation of a 3 percent aqueous liquid methanol solution as the fuel and air (O&sub2;) as the oxidant. The only products are CO&sub2; and water. Therefore, because recharging can be accomplished by refueling with methanol, vehicles can enjoy unlimited range and extended use compared to battery operated devices requiring recharging time and power accessibility.
Direct Methanol Fuel Cell for Portable Applications
A five cell direct methanol fuel cell stack has been developed at the Jet Propulsion Laboratory. Presently direct methanol fuel cell technology is being incorporated into a system for portable applications. Electrochemical performance and its dependence on flow rate and temperature for the five fuel cell are presented.
Recent Advances in High-Performance Direct Methanol Fuel Cells
Direct methanol fuel cells for portable power applications have been advanced significantly under DARPA- and ARO-sponsored programs over the last five years. A liquid-feed, direct methanol fuel cell developed under these programs, employs a proton exchange membrane as electrolyte and operates on aqueous solutions of methanol with air or oxygen as the oxidant.
Next-generation space manipulator
In 1977, the Protoflight Manipulator Arm (PFMA) was designed and built. It is one of two space qualified manipulators. A new conceptual design for the next generation manipulator of space applications is presented. The next generation manipulator and the PFMA are described in detail. Their differences could have a major influence on the construction, testing, and performance of a space arm. Assessed in detail are these technologies and their effect on the design. Servicing is an important goal of robotics in space. Parameters such as environment, type of task, time sequence, and dexterity will affect the arm and its ability to accomplish its mission. Requirements such as these are important considerations in the design of the next generation space arm.
Shuttle bay telerobotics demonstration
A demonstration of NASA's robotics capabilities should be a balanced agenda of servicing and assembly tasks combined with selected key technical experiments. The servicing tasks include refueling and module replacement. Refueling involves the mating of special fluid connectors while module replacement requires an array of robotic technologies such as special tools, the arm of a logistics tool, and the precision mating of orbital replacement units to guides. The assembly task involves the construction of a space station node and truss structure. The technological experiments will focus on a few important issues: the precision manipulation of the arms by a teleoperator, the additional use of several mono camera views in conjunction with the stereo system, the use of a general purpose end effector versus a caddy of tools, and the dynamics involved with using a robot with a stabilizer.
Actuators for a space manipulator
The robotic manipulator can be decomposed into distinct subsytems. One particular area of interest of mechanical subsystems is electromechanical actuators (or drives). A drive is defined as a motor with an appropriate transmission. An overview is given of existing, as well as state-of-the-art drive systems. The scope is limited to space applications. A design philosophy and adequate requirements are the initial steps in designing a space-qualified actuator. The focus is on the d-c motor in conjunction with several types of transmissions (harmonic, tendon, traction, and gear systems). The various transmissions will be evaluated and key performance parameters will be addressed in detail. Included in the assessment is a shuttle RMS joint and a MSFC drive of the Prototype Manipulator Arm. Compound joints are also investigated. Space imposes a set of requirements for designing a high-performance drive assembly. Its inaccessibility and cryogenic conditions warrant special considerations. Some guidelines concerning these conditions are present. The goal is to gain a better understanding in designing a space actuator.