Engineering topics

Choi, S. K.

Publications and source records attributed to Choi, S. K..

67 records · Page 4

DOE OSTI2024

Study of e + e − → π + π − π 0 at s from 2.00 to 3.08 GeV at BESIII

With the data samples taken at center-of-mass energies from 2.00 to 3.08 GeV with the BESIII detector at the BEPCII collider, a partial wave analysis on the e + e − → π + π − π 0 process is performed. The Born cross sections for e + e − → π + π − π 0 and its intermediate processes e + e − → ρ π and ρ ( 1450 ) π are measured as functions of s . The results for e + e − → π + π − π 0 are consistent with previous results measured with the initial state radiation method within one standard deviation, and improve the uncertainty by a factor of ten. By fitting the line shapes of the Born cross sections for the e + e − → ρ π and e + e − → ρ ( 1450 ) π , a structure with mass M = 2119 ± 11 ± 15 MeV / c 2 and width Γ = 69 ± 30 ± 5 MeV is observed with a significance of 5.9 σ , where the first uncertainties are statistical and the second ones are systematic. This structure can be interpreted as an excited ω state. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Search for diphoton decays of an axionlike particle in radiative J / ψ decays

We search for the diphoton decay of a light pseudoscalar axionlike particle, a , in radiative J / ψ decays, using 10 10 J / ψ events collected with the BESIII detector. We find no evidence of a signal and set upper limits at the 95% confidence level on the product branching fraction B ( J / ψ → γ a ) × B ( a → γ γ ) and the axionlike particle photon coupling constant g a γ γ in the ranges of ( 3.7 – 48.5 ) × 10 − 8 and ( 2.2 – 101.8 ) × 10 − 4 GeV − 1 , respectively, for 0.18 ≤ m a ≤ 2.85 GeV / c 2 . These are the most stringent limits to date in this mass region. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Search for the radiative transition χ c 1 ( 3872 ) → γ ψ 2 ( 3823 )

Using 9.0 f b − 1 of e + e − collision data collected at center-of-mass energies from 4.178 to 4.278 GeV with the BESIII detector at the BEPCII collider, we perform the first search for the radiative transition χ c 1 ( 3872 ) → γ ψ 2 ( 3823 ) . No signal is observed and the upper limit on the ratio of branching fractions B ( χ c 1 ( 3872 ) → γ ψ 2 ( 3823 ) , ψ 2 ( 3823 ) → γ χ c 1 ) / B ( χ c 1 ( 3872 ) → π + π − J / ψ ) is set at 0.075 at the 90% confidence level. Our result contradicts theoretical predictions under the assumption that the χ c 1 ( 3872 ) is the pure charmonium state χ c 1 ( 2 P ) . Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Evidence of the h c → K S 0 K + π − + c . c . decay

Based on ( 2.712 ± 0.014 ) × 10 9 ψ ( 3686 ) events collected by the BESIII Collaboration, evidence of the hadronic decay h c → K S 0 K + π − + c . c . is found with a significance of 4.3 σ in the ψ ( 3686 ) → π 0 h c process. The branching fraction of h c → K S 0 K + π − + c . c . is measured to be ( 7.3 ± 1.8 ± 0.8 ) × 10 − 4 , where the first and second uncertainties are statistical and systematic, respectively. Combining with the exclusive decay width of η c → K K ¯ π , our result indicates inconsistencies with both pQCD and NRQCD predictions. Published by the American Physical Society 2024

Ablikim, M.↗

DOE OSTI2024

Study of e + e − → ω X ( 3872 ) and γ X ( 3872 ) from 4.66 to 4.95 GeV

Using data samples with an integrated luminosity of 4.5 fb − 1 collected by the BESIII detector at center-of-mass energies ranging from 4.66 GeV to 4.95 GeV, we study the processes of e + e − → ω X ( 3872 ) and e + e − → γ X ( 3872 ) . With the e + e − → ω X ( 3872 ) process, the branching fraction ratio R ≡ B ( X ( 3872 ) → γ J / ψ ) B ( X ( 3872 ) → π + π − J / ψ ) is measured to be 0.38 ± 0.2 0 stat ± 0.0 1 syst ( R < 0.83 at 90% confidence level). In addition, we measure the ratio of the average cross section of e + e − → ω X ( 3872 ) to e + e − → ω χ c 1 ( ω χ c 2 ) to be σ ω X ( 3872 ) / σ ω χ c 1 ( σ ω X ( 3872 ) / σ ω χ c 2 ) = 5.2 ± 1.0 stat ± 1.9 syst ( 5.5 ± 1.1 stat ± 2.4 syst ) . Finally, we search for the process of e + e − → γ X ( 3872 ) , and no obvious signal is observed. The upper limit on the ratio of the average cross section of e + e − → γ X ( 3872 ) to e + e − → ω X ( 3872 ) is set as σ γ X ( 3872 ) / σ ω X ( 3872 ) < 0.23 at 90% confidence level. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Search for the leptonic decays D * + → e + ν e and D * + → μ + ν μ

We present the first search for the leptonic decays D * + → e + ν e and D * + → μ + ν μ by analyzing a data sample of electron-positron collisions recorded with the BESIII detector at center-of-mass energies between 4.178 and 4.226 GeV, corresponding to an integrated luminosity of 6.32 fb − 1 . No significant signal is observed. The upper limits on the branching fractions for D * + → e + ν e and D * + → μ + ν μ are set to be 1.1 × 10 − 5 and 4.3 × 10 − 6 at 90% confidence level, respectively. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Measurements of Normalized Differential Cross Sections of Inclusive η Production in e + e − Annihilation at Energy from 2.0000 to 3.6710 GeV

Using data samples collected with the BESIII detector operating at the BEPCII storage ring, the cross section of the inclusive process e + e − → η + X , normalized by the total cross section of e + e − → hadrons , is measured at eight center-of-mass energy points from 2.0000 to 3.6710 GeV. These are the first measurements with momentum dependence in this energy region. Our measurement shows a significant discrepancy compared to the existing fragmentation functions. To address this discrepancy, a new QCD analysis is performed at the next-to-next-to-leading order with hadron mass corrections and higher twist effects, which can explain both the established high-energy data and our measurements reasonably well. Published by the American Physical Society 2024

Physics↗

NASA NTRS2017

Composite Reflective Absorptive IR-Blocking Filters Embedded in Metamaterial Antireflection Coated Silicon

Infrared (IR)-blocking filters are crucial for controlling the radiative loading on cryogenic systems and for optimizing the sensitivity of bolometric detectors in the far-IR. We present a new IR filter approach based on a combination of patterned frequency-selective structures on silicon and a thin (2575 micron thick) absorptive composite based on powdered reststrahlen absorbing materials. For a 300 K blackbody, this combination reflects approximately 50% of the incoming light and blocks greater than.99.8% of the total power with negligible thermal gradients and excellent low-frequency transmission. This allows a reduction in the IR thermal loading to negligible levels in a single cold filter. These composite filters are fabricated on silicon substrates, which provide excellent thermal transport laterally through the filter and ensure that the entire area of the absorptive filter stays near the bath temperature. A metamaterial antireflection coating cut into these substrates reduces in-band reflections to below 1%, and the in-band absorption of the powder mix is below 1% for signal bands below 750 GHz. This type of filter can be directly incorporated into silicon refractive optical elements.

Munson, C. D.↗

NASA NTRS2016

The Atacama Cosmology Telescope: The Polarization-Sensitive ACTPol Instrument

The Atacama Cosmology Telescope (ACT) makes high angular resolution measurements of anisotropies in the Cosmic Microwave Background (CMB) at millimeter wavelengths. We describe ACTPol, an upgraded receiver for ACT, which uses feedhorn-coupled, polarization-sensitive detector arrays, a 3deg field of view, 100 mK cryogenics with continuous cooling, and meta material antireflection coatings. ACTPol comprises three arrays with separate cryogenic optics: two arrays at a central frequency of 148 GHz and one array operating simultaneously at both 97 GHz and 148 GHz. The combined instrument sensitivity, angular resolution, and sky coverage are optimized for measuring angular power spectra, clusters via the thermal Sunyaev-Zel'dovich (SZ) and kinetic SZ signals, and CMB lensing due to large-scale structure. The receiver was commissioned with its first 148 GHz array in 2013, observed with both 148 GHz arrays in 2014, and has recently completed its first full season of operations with the full suite of three arrays. This paper provides an overview of the design and initial performance of the receiver and related systems.

Telescope↗

NASA NTRS2016

Survey Strategy Optimization for the Atacama Cosmology Telescope

In recent years there have been significant improvements in the sensitivity and the angular resolution of the instruments dedicated to the observation of the Cosmic Microwave Background (CMB). ACTPol is the first polarization receiver for the Atacama Cosmology Telescope (ACT) and is observing the CMB sky with arcmin resolution over approximately 2000 square degrees. Its upgrade, Advanced ACTPol (AdvACT), will observe the CMB in five frequency bands and over a larger area of the sky. We describe the optimization and implementation of the ACTPol and AdvACT surveys. The selection of the observed fields is driven mainly by the science goals, that is, small angular scale CMB measurements, B-mode measurements and cross-correlation studies. For the ACTPol survey we have observed patches of the southern galactic sky with low galactic foreground emissions which were also chosen to maximize the overlap with several galaxy surveys to allow unique cross-correlation studies. A wider field in the northern galactic cap ensured significant additional overlap with the BOSS spectroscopic survey. The exact shapes and footprints of the fields were optimized to achieve uniform coverage and to obtain cross-linked maps by observing the fields with different scan directions. We have maximized the efficiency of the survey by implementing a close to 24-hour observing strategy, switching between daytime and nighttime observing plans and minimizing the telescope idle time. We describe the challenges represented by the survey optimization for the significantly wider area observed by AdvACT, which will observe roughly half of the low-foreground sky. The survey strategies described here may prove useful for planning future ground-based CMB surveys, such as the Simons Observatory and CMB Stage IV surveys.

Atacama Cosmology Telescope (ACT)↗

NASA NTRS2016

The First Multichroic Polarimeter Array on the Atacama Cosmology Telescope: Characterization and Performance

The Atacama Cosmology Telescope Polarimeter (ACTPol) is a polarization sensitive receiver for the 6-meter Atacama Cosmology Telescope (ACT) and measures the small angular scale polarization anisotropies in the cosmic microwave background (CMB). The full focal plane is composed of three detector arrays, containing over 3000 transition edge sensors (TES detectors) in total. The first two detector arrays, observing at 146 gigahertz, were deployed in 2013 and 2014, respectively. The third and final array is composed of multichroic pixels sensitive to both 90 and 146 gigahertz and saw first light in February 2015. Fabricated at NIST, this dichroic array consists of 255 pixels, with a total of 1020 polarization sensitive bolometers and is coupled to the telescope with a monolithic array of broad-band silicon feedhorns. The detectors are read out using time-division SQUID multiplexing and cooled by a dilution refrigerator at 110 meter Kelvins. We present an overview of the assembly and characterization of this multichroic array in the lab, and the initial detector performance in Chile. The detector array has a TES detector electrical yield of 85 percent, a total array sensitivity of less than 10 microns Kelvin root mean square speed, and detector time constants and saturation powers suitable for ACT CMB observations.

Ho, S. P.↗

NASA NTRS1992

Numerical simulations of inductive-heated float-zone growth

The present work provides an improved fluid flow and heat-transfer modeling of float-zone growth by introducing a RF heating model so that an ad hoc heating temperature profile is not necessary. Numerical simulations were carried out to study the high-temperature float-zone growth of titanium carbide single crystal. The numerical results showed that the thermocapillary convection occurring inside the molten zone tends to increase the convexity of the melt-crystal interface and decrease the maximum temperature of the molten zone, while the natural convection tends to reduce the stability of the molten zone by increasing its height. It was found that the increase of induced heating due to the increase of applied RF voltage is reduced by the decrease of zone diameter. Surface tension plays an important role in controlling the amount of induced heating. Finally, a comparison of the computed shape of the free surface with a digital image obtained during a growth run showed adequate agreement.

Chan, Y. T.↗

NASA NTRS1984

The computation of rotational conical flows

A method based on the Clebsch velocity decomposition is presented to solve the steady, inviscid, supersonic flow field about arbitrary conical geometries. The system of equations developed, although formally equivalent to the Euler equations, retains the computational efficiency of type-dependent potential flow solutions. Accurate rotational-flow solutions are developed using shock-fitting procedures at the bow and imbedded waves along with special treatment of the vortical layer. Solutions are presented for several high Mach number conical flows and compared with existing Euler solutions and experimental data.

Grossman, B.↗