Engineering Papers⌕ Search

Engineering topics

Chip Trepte

Publications and source records attributed to Chip Trepte.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Tropical Three-dimensional Cloud Climatology during El Niño Events with CALIPSO Level-3 Cloud Products

The El Niño–Southern Oscillation (ENSO) is a large-scale climatic phenomenon that originates in the tropical Pacific Ocean but affects global climate patterns. Its warm phase El Niño occurs irregularly every two to seven years and peaks in winter. A previous case study showed opposite cloud anomalies at high, middle and low altitude regions during a weak 2006/2007 El Niño and a moderate 2009/2010 El Niño, suggesting a non-linear response of tropical clouds to El Niño sea surface temperature (SST) forcing. To further understand the cloud response to SST, we examine the three-dimensional (3-D) cloud anomalies during all recent five El Niño events since 2006 using level-3 (L3) cloud products from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission. During its 17+ years operation, CALIPSO delivered near-global measurements of cloud and aerosol profiles at unprecedented high resolution and sensitivity. In this work, we provide a comprehensive picture of cloud anomalies during El Niño, with a particular focus on thin cirrus clouds at high altitudes, which are challenging for passive sensor detection algorithms. Specifically, the vertical cloud anomalies are calculated with the L3 3-D Cloud Occurrence Product, the horizontal cloud anomalies are from the L3 Global Energy and Water Exchanges (GEWEX) product, and the ice cloud extinction profiles and ice water content are obtained from the L3 Ice Cloud product. These findings will improve current knowledge of ENSO from a new perspective.

El Nino↗
NASA NTRS2017

TPSAS-NF1676L-26965-DND

A comprehensive understanding of the spatial and temporal distributions of clouds on a global scale can be best achieved when the vertical distributions and multi-layer occurrence frequencies obtained from active remote sensors are fully integrated with the horizontal distributions currently provided by passive sensors. The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) satellite lidar onboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) spacecraft was specially designed to acquire aerosol and cloud profiles with unprecedented high vertical resolution and accuracy. As a part of the A-Train satellite constellation, CALIPSO has been operating routinely for more than 10 years and continues to provide a wealth of cloud observations to describe the mean state and inter-annual variability. Recently a suite of level 3 (L3) cloud products has been under development by the CALIPSO lidar science working group at the NASA Langley Research Center. These products describe 3-dimensional (3D) cloud occurrence and 3D ice cloud extinction coefficients and ice water content. Future evolution of the products will add observations from the Imaging Infrared Radiometer onboard CALIPSO. Here we present a brief introduction and provide results from a product prototype. We will characterize the inter-annual vertical variability of zonal cloud occurrence and ice water content during the last 10 years. Suggestions and comments are welcome to help us design and provide better cloud climatology products using CALIOP observations for our cloud community.

Xia Cai↗
NASA NTRSDate not supplied

TPSAS-NF1676L-18612-DND

Can a space-based elastic backscatter lidar and coincident infrared radiometer recognize the varied microphysical properties observed by aircraft-based cloud probes in cirrus clouds? If so, then the global and continuous coverage provided by the satellite instruments can extend the knowledge about cirrus cloud properties gained from intensive aircraft field campaigns. The recent Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) aircraft field mission that occurred during August and September, 2013 is an ideal data set to use to test whether this is possible. During SEAC4RS there was extensive sampling of cirrus clouds occurring in widely varied conditions, including the North American Monsoon, forest fires, midlatitude frontal convection and tropical convection. Aircraft cloud probe sampling (2D-S, FCDP or FSSP, CPI) was performed from three airplanes, often coordinated with remote sensing by an aircraft-based elastic backscatter lidar (CPL). During the mission the CALIPSO satellite also observed these clouds from space with a similar elastic backscatter lidar (CALIOP) and an infrared radiometer (IIR). There are several cases where the airplanes sampled directly along the satellite track, but also many overpasses of the region and these features that were not coincident with the aircraft-based sampling. This presentation seeks to address the question of whether relationships between the cloud particle size distribution measurements and habits observed by the SPEC cloud probes and CPL aircraft lidar parameters can be up-scaled to classify the CALIPSO satellite observations from this region and time period. The lidar can also provide cloud top information and evidence of whether there was irreversible transport of ice and aerosols into the UT/LS.

Melody Avery↗
NASA NTRSDate not supplied

TPSAS-NF1676L-20101-DND

Aerosols influence climate through their direct and indirect effects. The aerosol indirect effect is based on the way they interact with surrounding clouds. During cloud formation and development, aerosols act as cloud nucleation nuclei (CCN) or ice nuclei, which modifies cloud micro-, macro-physical and radiative properties, and hence helps to shape the Earth's radiation budget. Dominant sources of ocean-derived aerosols that may serve as CCN include sea spray and biogenic aerosol. In this study, we used 10-years global observations from the A-Train satellites to show seasonal variations of cloud droplet number concentrations (CDNC), ocean chlorophyll concentrations, aerosol angstrom parameter, and rainfall. Potential cloud-aerosol interactions are further discussed based on seasonal and spatial correlations between microphysics of clouds and aerosols. Emphasis for this study is placed on the southern ocean and tropical Pacific.

Shan Zeng↗
NASA NTRSDate not supplied

Models, In situ, and Remote Sensing of Aerosols (MIRA)

There is a natural partitioning of scientific interest amongst three specialties of aerosol re-search: modeling, in situ measurements, and remote sensing. The broader aerosol community benefits when these groups interact, and this strengthens overall scientific impact on climate and air quality research and predictions. The new MIRA working group establishes a forum for identifying collaborations and improving discussions amongst specialties and across regional boundaries. One area of keen interest is uniting satellite and ground-based lidar groups with other aerosol disciplines. Elastic backscatter lidars depend upon a priori knowledge of aerosol properties to convert measured lidar profiles into aerosol extinction profiles. Acquiring additional insight on aerosol properties and transport is highly valuable to these lidar groups to improve the data quality and aid in their scientific interpretation. Another area of interest is to facilitate the incorporation of measurements into global aerosol models. Modelers need aerosol optical look-up tables that enable quick conversions of hydrated (and dry) polydisperse size distributions into aerosol optical properties (extinction, scattering, etc.), but many of the existing tables are based upon outdated measurements. Thus, MIRA is building the Tables of Aerosol Optics (TAO), which is a community collection of aerosol optical calculations. This expands on the historical efforts of Shettle and Fenn, d’Almeida, GADS, OPAC, etc., except that TAO seeks continual input from the community. Thus, as aerosol measurement and computational techniques advance, so does the TAO collective. Since TAO is a community collective, it is expected that users will optionally upload computations for aerosol type as well as computations for all of the traditional aerosol species(like amm sulfate, amm nitrate, organics, etc.). The near-term purpose of the MIRA working group is to: *Characterize regional aerosol lidar ratios to support improvements of aerosol extinction profiles and understanding of aerosol typing. *Create TAO --a community cooperative of aerosol optical tables. *Facilitate international communications between aerosol measurement and modeling groups. *Encourage the use of regional knowledge to develop and improve remote sensing techniques for current and future backscatter lidars located in space. *Enable and foster communication between the scientists who run global aerosol models and scientists who analyze space-based lidar data. We will discuss how a collaborative aerosol working group will be organized on this topic. Those who are interested in MIRA can sign up for the MIRA email listserver at https://forms.gle/qdbCnngzNJc5YJi57.

Greg Schuster↗
NASA NTRSDate not supplied

Models, In situ, and Remote sensing of Aerosols (MIRA): Formation of an International Working Group

There is a natural partitioning of scientific interest amongst three specialties of aerosol re- search: modeling, in situ measurements, and remote sensing. The broader aerosol community benefits when these groups interact, and this strengthens overall scientific impact on climate and air quality research and predictions. The new MIRA working group establishes a forum for identifying collaborations and improving discussions amongst specialties and across regional boundaries. One area of keen interest is uniting satellite and ground-based lidar groups with other aerosol disciplines. Elastic backscatter lidars depend upon a priori knowledge of aerosol properties to convert measured lidar profiles into aerosol extinction profiles. Acquiring additional insight on aerosol properties and transport is highly valuable to these lidar groups to improve the data quality and aid in their scientific interpretation. Another area of interest is to facilitate the incorporation of measurements into global aerosol models. Modelers need aerosol optical look-up tables that enable quick conversions of hydrated (and dry) polydisperse size distributions into aerosol optical properties (extinction, scattering, etc.), but many of the existing tables are based upon outdated measurements. Thus, MIRA is building the Tables of Aerosol Optics (TAO), which is a community collection of aerosol optical calculations. This expands on the historical efforts of Shettle and Fenn, d’Almeida, GADS, OPAC, etc., except that TAO seeks continual input from the community. Thus, as aerosol measurement and computational techniques advance, so does the TAO collective. Since TAO is a community collective, it is expected that users will optionally upload computations for aerosol type as well as computations for all of the traditional aerosol species (like amm sulfate, amm nitrate, organics, etc.). The near-term purpose of the MIRA working group is to: * Characterize regional aerosol lidar ratios to support improvements of aerosol extinction profiles and understanding of aerosol typing. * Create TAO -- a community cooperative of aerosol optical tables. * Facilitate international communications between aerosol measurement and modeling groups. * Encourage the use of regional knowledge to develop and improve remote sensing techniques for current and future backscatter lidars located in space. * Enable and foster communication between the scientists who run global aerosol models and scientists who analyze space-based lidar data. We will discuss how a collaborative aerosol working group will be organized on this topic. Send email to calipso_v5alr-join@lists.nasa.gov with the word `subscribe' in the subject line to join MIRA.

Gregory Schuster↗
NASA NTRSDate not supplied

Models, In situ, and Remote sensing of Aerosols (MIRA): Formation of an International Working Group

There is a natural partitioning of scientific interest amongst three specialties of aerosol research: modeling, in situ measurements, and remote sensing. The community sees enhanced measurement capabilities when these groups interact, and this strengthens the overall scientific impact on climate and air quality. The Models, In situ, and Remote sensing of Aerosols (MIRA) working group connects members of the different aerosol communities through collaborative projects. What is MIRA? MIRA is forum that fosters international collaborations amongst the aerosol specialties. MIRA is also a collection of interdisciplinary projects with clear goals that are pursued by small working groups. Finally, MIRA projects are generally characterized by requests for additional scientific data (both observational and modeled). Why? The purpose of MIRA is to contextualize both observations and model results through the encouragement of holistic projects and collaborations. How does MIRA differ from other projects? MIRA focuses on interdisciplinarity to improve measurements and their utility, so MIRA complements the activities of other groups. For example, ensemble model runs of AeroCom could be used in a MIRA project with greater robustness than a similar effort that uses single-model analyses. We first present a description of MIRA and how your project can become a part of the MIRA community. This is followed by brief descriptions of some of the current MIRA projects, which include the Mapping of Aerosol lidar ratios for CALIPSO (MAC), the Tables of Aerosol Optics (TAO), and the Harmonization of aerosol Assimilation Models and Retrievals (HAMR). Finally, we discuss the immediate science goals and organization of MIRA.

Gregory Schuster↗
NASA NTRSDate not supplied

Models, In situ, and Remote sensing of Aerosols (MIRA)

The Models, In situ, and Remote sensing of Aerosols (MIRA) working group connects members of the different aerosol communities through collaborative projects. This abstract, additional details, and a list of current projects can be found at https://science.larc.nasa.gov/mira-wg/. Join our email distribution list of 200+ members at https://espo.nasa.gov/lists/listinfo/mira.In this talk, we will describe some current MIRA projects that are relevant to AeroCom (e.g., the Table of Aerosol Optics, or TAO) and the benefits of presenting your multi-disciplinary work at MIRA sessions and meetings. What is MIRA? MIRA is forum that fosters international collaborations amongst the aerosol Modeling, In situ, and Remote sensing specialties. MIRA advances scientific knowledge about aerosol properties and improves our understanding of air quality, weather, and climate through the pursuit of specific goals. MIRA emphasizes areas of study where the aerosol specialties overlap, and MIRA projects seek additional data and insight from others (observational and modeled). Why? The purpose of MIRA is to contextualize both observations and model results through the encouragement of holistic projects and collaborations. Linking aerosol disciplines removes gaps in understanding that hinder our interpretation of observations and model results. Such linkages improve our understanding of air quality, weather, and climate. How does MIRA differ from other working groups? MIRA focuses on interdisciplinarity to improve measurements and their utility, so MIRA complements the activities of other groups. Other interdisciplinary aerosol groups have different primary foci. For instance, AeroCom mainly focuses on improving global aerosol models, AeroSat focuses on strengthening collaboration amongst satellite aerosol retrieval groups, and ICAP focuses on aerosol forecasting. We hope that many MIRA projects engage these groups.

Gregory Schuster↗