Engineering PapersSearch

Engineering topics

Chester Dolph

Publications and source records attributed to Chester Dolph.

At least 19 records

Considerations for Optimal Sensor Placement for Higher Accuracy Object Localization for Urban Air Mobility

Previous research into object localization has shown that sensor placement and alignment plays an important role in achieving higher accuracy levels of the estimated location of a tracked Urban Air Mobility Vehicle. In general, a near-orthogonal intersection between the ground node observation vectors results in the highest accuracy due to a smaller overlapping uncertainty region between both. This applies to triangulation by means of ground node camera angle observations as well as trilateration by means of ground node distance measurements. However, this simple concept is not easily fulfilled with a network of a limited number of static ground nodes and a moving object to be localized. This case study performs sensitivity analyses and explores practical ways on how to achieve higher estimate accuracy levels in this context.

sensor placement

Demonstration of Data Processing and Fusion from Distributed Radars for AAM Surveillance

Advanced Air Mobility (AAM) is an active area of development which foresees the integration of autonomous uncrewed aircraft into the civil airspace for air transportation of people and cargo. Safe integration requires significant technological developments and extensive testing phases of sensing and surveillance strategies in dense airspace. Compared to well-assessed manned aviation systems scenarios, surveillance strategies in the AAM and small Uncrewed Aircraft Vehicles (UAVs) context need to detect smaller platforms flying at lower altitude against cluttered backgrounds in dense airspace. Fusion of data provided by a network of distributed sensing nodes is a powerful tool to enable detection and tracking in such complex conditions. This paper contributes to this research direction by proposing a surveillance strategy for the AAM environment based on sensor fusion of data acquired by distributed ground-based radars. Specifically, experimental data collected with three independent radars, observing the flight of two small UAVs, are used. Data fusion at tracking level is based on a leader-helper strategy where the leader radar uses the helper’s measurements to increase the lifespan of its generated tracks. This solution shows promising results with a 10% increase in track coverage with respect to the standalone leader radar tracking solution. The paper also proposes an interference removal processing method which is applied on the data collected by two of the radars.

Federica Vitiello

Distributed Ground Sensor Fusion Based Object Tracking for Autonomous Advanced Air Mobility Operations

Autonomous operations are a crucial aspect in the context of Advanced Air Mobility and other emerging aviation markets. In order to enable this autonomy, an accurate and detailed understanding of the positions of the various vehicles in the air is necessary. Full localization independent of on-board sensors makes the system suitable for noncooperative vehicles. This paper focuses on the object tracking part that relies on distributed ground-based sensor fusion, considering specific properties and limitations of different sensor types. Results show satisfactory performance in nominal scenarios with full coverage. Dropouts of individual sensors affect the accuracy of the tracking results, which agrees with expectations for partial coverage, when full localization is not achievable anymore. Finally, a study is performed to identify which parameters have the largest impact on the fit error.

Autonomous

Using Trajectory Smoothness Metrics to Identify Drones in Radar Track Data

The identification of unmanned aircraft systems (UAS) using trajectory data is considered. Specifically, a number of smoothness metrics are proposed, which can be used to distinguish UAS from other aerial objects even when they are engaged in accelerative maneuvers (non-constant-velocity flight). The metrics are evaluated on a data set from a UAS sense-and-avoid field test, which contains track data of aerial objects recorded by a vehicle-board radar system during a flight test. The metrics are found to effectively differentiate UAS from other objects such as birds for this data set. In addition, an initial statistical performance analysis of one of the smoothness metrics is undertaken, using 15 data sets deriving from multiple flight tests. The smoothness metric is shown to identify the target UAS with 95% accuracy (95% true positive rate), while achieving a false positive rate of less than 9%.

Sandip Roy

Contextual Segmentation of Fire Spotting Regions Through Satellite-Augmented Autonomous Modular Sensor Image

Globally, forest fires remain a significant threat to human and environmental wellbeing. Towards mitigating the impacts of forest fires, it is critical that accurate and updated information regarding not only the fire line, but also nearby human settlements, vegetation, and water sources is reported quickly to emergency services. However, while existing UAS-based fire detection methods are effective, they largely do not report the contextual environmental information necessary to best serve nearby communities in disaster response. Additionally, modern advancements in deep learning offer new approaches for image segmentation which may improve classification accuracy beyond current pixel-wise indices. In this work, we benchmark the performance of these modern segmentation techniques in locating both fire lines and environmental features in historical Autonomous Modular Sensor imagery. Furthermore, we augment these outputs with satellite imagery segmentation towards developing a robust contextual mapping tool for rapid emergency fire response and decision making.

Nikhil Behari

An Improved Far-Field Small Unmanned Aerial System Optical Detection Algorithm

Onboard far-field aircraft detection is needed for safe non-cooperative traffic mitigation for autonomous small Unmanned Aerial System (sUAS) operations. This work presents an aircraft detect and track pipeline that fuses image differencing and morphological filtering detections for inputs to a Kalman-based object tracking pipeline. The pipeline is evaluated using two types of flight encounters: 1) motorcopter sUAS vs. fixed-wing sUAS 2) motorcopter sUAS vs general aviation plane.

Chester Dolph

Enhancing Neural Network Decision-Making with Variational Autoencoders

Machine intelligence has been used to tackle increasingly complex problems and deep learning solutions are at the forefront of tackling these problems. In general, these architectures have a great number of parameters that are methodically updated in training. The vast number and complexity of deep neural networks makes it very difficult to decipher the inner workings of the neurons and layers that make up the network. This paper posits that trustworthiness and trust in autonomous systems are increased through eXplainable Artificial Intelligence (XAI) and presents a method that enhances the explainability and understanding of a neural network decision. We leverage variational autoencoders to produce human interpretable features from complex data sets. We show that the explainable features can then be used for machine learning applications. This explainability encourages people to be more inclined to justifiably trust machine decision-making.

Loc Tran

Enhancing Neural Network Explainability with Variational Autoencoders

Machine intelligence has been used to tackle increasingly complex problems and deep learning solutions are at the forefront of tackling these problems. In general, these architectures have a great number of parameters that are methodically updated in training. The vast number and complexity of deep neural networks makes it very difficult to decipher the inner workings of the neurons and layers that make up the network. This paper posits that trustworthiness and trust in autonomous systems are increased through eXplainable Artificial Intelligence (XAI) and presents a method that enhances the explainability and understanding of a neural network decision. We leverage variational autoencoders to produce human interpretable features from complex data sets. We show that the explainable features can then be used for machine learning applications. Explainability inspires trust in autonomous systems that use deep learning, which is necessary for safety critical systems.

Loc Tran

A Structurally-Adaptive Framework for Distributed Airborne Sensing over Real-time Collaborative Information Sharing Networks

The emergence and maturation of wireless communication technologies continue to transform the aviation industry and are enabling new solutions to challenges faced by NASA’s Advanced Air Mobility (AAM) initiative. AAM is leading towards high-density autonomous aircraft operations in areas underserved by traditional aviation, such as over densely populated urban centers. In this paper, we build on concepts from Smart Spaces - where sensing, processing, and communication are embedded in an environment, and agents are operating within the space can exploit these capabilities in real-time through collaborative information sharing networks. Building from these concepts, we propose a framework to enable a dynamic, topologically-adaptive, and distributed estimation system for man-rated aviation to address challenges faced by autonomous AAM operations. This paper presents the initial concept of operations and system design for this framework, presents a mathematical formulation for abstraction of the problem, identifies requirements and constraints for operation, and presents algorithmic constructs and mathematical formalisms to demonstrate operation. The proposed framework will be evaluated on a regional AAM flight scenario and will focus on two initial applications: (1) GPS-free navigation supporting precision approach and landing (PAL), and (2) surveillance and conformance monitoring of aircraft in vertiport airspaces. Such approaches show promise in addressing gaps in current technologies needed to enable future AAM concepts, while promising greater capabilities, performance, robustness, and safety over current aviation systems and operations.

Structurally-Adaptive

Simulated Vision-based Approach and Landing System for Advanced Air Mobility

Advanced Air Mobility (AAM) aircraft require precision approach and landing systems (PALS) in several environments, such as urban, suburban, and rural. It is challenging to implement current state-of-the-art methods approved for automated approach and landing for AAM operations with challenges such as GPS degradation in urban environments and visual navigation aids like the glideslope and localizer being narrow and not allowing alternative incoming landing angles at vertiports. However, existing technology and systems, i.e., the instrument landing system (ILS) with glideslope and localizer indicators that use vision, IR, radar, or GPS methods, provide baseline perception and sensing requirements for AAM aircraft approach and landing. This paper focuses on vision-based PAL and computer vision feature correspondence methods to demonstrate a baseline navigation system while adhering to the Federal Aviation Administration requirements and regulations about heliport design (FAA AC 150/5390-2C), which is one of the closest references for vertiport requirements and regulations. The coplanar pose from orthography and scaling with iterations (COPOSIT) algorithm determines pose estimation, which feeds into an Extended Kalman filter that combines IMU with vision to create a vision-based approach and landing (VAL) sensor fusion navigation solution for GPS-denied environments. The VAL navigation solution provides promising simulation results for AAM PALS with Hough circle detection and feature correspondence, which demonstrate robustness to false positives. This paper incorporates moderately high- fidelity simulations with computer graphics rendering to show a distributed sensor network to track an AAM aircraft during approach and landing to compare with the aircraft’s onboard vision-based navigation solution.

distributed sensing

VSLAM and Vision-based Approach and Landing for Advanced Air Mobility

Advanced Air Mobility (AAM) aircraft have many challenges in landing accurately and safely in urban, suburban, and rural environments. Localization in large and open rural environments could utilize GPS, but AAM aircraft in urban environments will encounter GPS degradation. Another challenge involves flight operation time, i.e., flying during the day or at night. There are different guidelines, landmarks, and landing light configurations at runways, heliports, and vertiports for daytime and nighttime applications. Tailoring feature detection methods for AAM approach and landing during the day and night pose different issues and challenges. It is easier to detect edges, lines, and other runway markers during the day than at night. Conversely, it is easier to see landing light configurations and patterns at nighttime than daytime. Consequently, utilizing the same feature detector for daytime and nighttime operations may not be feasible. This paper focuses on a vision-based precision approach and landing (PAL) by comparing ORB SLAM 2, a Vision Simultaneous Localization and Mapping (VSLAM) algorithm, and a novel EKF that combines onboard IMU measurements with coplanar pose from orthography and scaling with iterations (COPOSIT). Conducting unmanned aerial system (UAS) flight tests at NASA Armstrong Flight Research Center (AFRC) with landmarks and fiducials distributed around the landing zone provides a simulated AAM approach and landing data to test vision-based PAL methods to provide Alternative Position, Navigation, and Timing (APNT) solutions for AAM PAL applications. The novel vision-based PAL EKF with IMU and COPOSIT provides accurate state estimation when distributed landmarks and fiducials are in the field of view.

distributed sensing

A Simulation Architecture for Air Traffic Over Urban Environments Supporting Autonomy Research in Advanced Air Mobility

As part of its research, NASA investigates concepts, aircraft, and operations related to Advanced Air Mobility (AAM). One of the most challenging scenarios for AAM will be enabling safe routine access near densely populated urban centers. AAM flight operations over a regional area require a moderately high-fidelity simulation capability to develop and evaluate autonomy technologies in the urban environment. This paper aims to describe a system to simulate flight operations around regions such as the San Francisco-Oakland Bay area at a moderately-high scale (tens to hundreds of flights) that incorporates detailed vehicle models and control necessary to support research in airborne autonomy. The flight vehicle utilizes NASA AAM concept vehicle dynamics integrated with a custom flight management system and flight control system to simulate all flight phases accurately. The simulation incorporates a detailed simulated urban environment and includes glass cockpit displays to monitor aircraft operations. Simulation models integrate to simulate air and ground-based sensors, such as Radar and LiDAR. As a commercially available rendering engine, X-Plane 11 is used as the renderer to simulate vision-based sensors (such as onboard and ground-based cameras) with a detailed graphical model of a city at different times of the day and weather conditions. This paper presents the simulation and software architecture used for simulating AAM traffic over this urban region. This system enables the evaluation of NASA research concepts in autonomy for urban AAM operations on the path toward flight test evaluation.

distributed sensing

A Simulation Architecture for Air Traffic Over Urban Environments Supporting Autonomy Research in Advanced Air Mobility

As part of its research, NASA investigates concepts, aircraft, and operations related to Advanced Air Mobility (AAM). One of the most challenging scenarios for AAM will be enabling safe routine access near densely populated urban centers. AAM flight operations over a regional area require a moderately high-fidelity simulation capability to develop and evaluate autonomy technologies in the urban environment. This paper aims to describe a system to simulate flight operations around regions such as the San Francisco-Oakland Bay area at a moderately-high scale (tens to hundreds of flights) that incorporates detailed vehicle models and control necessary to support research in airborne autonomy. The flight vehicle utilizes NASA AAM concept vehicle dynamics integrated with a custom flight management system and flight control system to simulate all flight phases accurately. The simulation incorporates a detailed simulated urban environment and includes glass cockpit displays to monitor aircraft operations. Simulation models integrate to simulate air and ground-based sensors, such as Radar and LiDAR. As a commercially available rendering engine, X-Plane 11 is used as the renderer to simulate vision-based sensors (such as onboard and ground-based cameras) with a detailed graphical model of a city at different times of the day and weather conditions. This paper presents the simulation and software architecture used for simulating AAM traffic over this urban region. This system enables the evaluation of NASA research concepts in autonomy for urban AAM operations on the path toward flight test evaluation.

Distributed sensing