Engineering Papers⌕ Search

Engineering topics

Chen, J.

Publications and source records attributed to Chen, J..

At least 379 records · Page 21

Differential memory in the earth's magnetotail

The process of 'differential memory' in the earth's magnetotail is studied in the framework of the modified Harris magnetotail geometry. It is verified that differential memory can generate non-Maxwellian features in the modified Harris field model. The time scales and the potentially observable distribution functions associated with the process of differential memory are investigated, and it is shown that non-Maxwelllian distributions can evolve as a test particle response to distribution function boundary conditions in a Harris field magnetotail model. The non-Maxwellian features which arise from distribution function mapping have definite time scales associated with them, which are generally shorter than the earthward convection time scale but longer than the typical Alfven crossing time.

Burkhart, G. R.↗

A Variational Assimilation Method for Satellite and Conventional Data: Development of Basic Model for Diagnosis of Cyclone Systems

A summary is presented of the progress toward the completion of a comprehensive diagnostic objective analysis system based upon the calculus of variations. The approach was to first develop the objective analysis subject to the constraints that the final product satisfies the five basic primitive equations for a dry inviscid atmosphere: the two nonlinear horizontal momentum equations, the continuity equation, the hydrostatic equation, and the thermodynamic equation. Then, having derived the basic model, there would be added to it the equations for moist atmospheric processes and the radiative transfer equation.

Achtemeier, Gary L.↗

A Variational Assimilation Method for Satellite and Conventional Data: a Revised Basic Model 2B

A variational objective analysis technique that modifies observations of temperature, height, and wind on the cyclone scale to satisfy the five 'primitive' model forecast equations is presented. This analysis method overcomes all of the problems that hindered previous versions, such as over-determination, time consistency, solution method, and constraint decoupling. A preliminary evaluation of the method shows that it converges rapidly, the divergent part of the wind is strongly coupled in the solution, fields of height and temperature are well-preserved, and derivative quantities such as vorticity and divergence are improved. Problem areas are systematic increases in the horizontal velocity components, and large magnitudes of the local tendencies of the horizontal velocity components. The preliminary evaluation makes note of these problems but detailed evaluations required to determine the origin of these problems await future research.

Achtemeier, Gary L.↗

An extended Reed Solomon decoder design

It has previously been shown that the Reed-Solomon (RS) codes can correct errors beyond the Singleton and Rieger Bounds with an arbitrarily small probability of a miscorrect. That is, an (n,k) RS code can correct more than (n-k)/2 errors. An implementation of such an RS decoder is presented in this paper. An existing RS decoder, the AHA4010, is utilized in this work. This decoder is especially useful for errors which are patterned with a long burst plus some random errors.

Chen, J.↗

A burst-correcting algorithm for Reed Solomon codes

The Bose, Chaudhuri, and Hocquenghem (BCH) codes form a large class of powerful error-correcting cyclic codes. Among the non-binary BCH codes, the most important subclass is the Reed Solomon (RS) codes. Reed Solomon codes have the ability to correct random and burst errors. It is well known that an (n,k) RS code can correct up to (n-k)/2 random errors. When burst errors are involved, the error correcting ability of the RS code can be increased beyond (n-k)/2. It has previously been show that RS codes can reliably correct burst errors of length greater than (n-k)/2. In this paper, a new decoding algorithm is given which can also correct a burst error of length greater than (n-k)/2.

Chen, J.↗

Magnetic reconnection in collisionless plasmas - Prescribed fields

The structure of the dissipation region during magnetic reconnection in collisionless plasma is investigated by examining a prescribed two-dimensional magnetic x line configuration with an imposed inductive electric field E(y). The calculations represent an extension of recent MHD simulations of steady state reconnection (Biskamp, 1986; Lee and Fu, 1986) to the collisionless kinetic regime. It is shown that the structure of the x line reconnection configuration depends on only two parameters: a normalized inductive field and a parameter R which represents the opening angle of the magnetic x lines.

Burkhart, G. R.↗

Fly-by-light technology development plan

The driving factors and developments which make a fly-by-light (FBL) viable are discussed. Documentation, analyses, and recommendations are provided on the major issues pertinent to facilitating the U.S. implementation of commercial FBL aircraft before the turn of the century. Areas of particular concern include ultra-reliable computing (hardware/software); electromagnetic environment (EME); verification and validation; optical techniques; life-cycle maintenance; and basis and procedures for certification.

Todd, J. R.↗

Fractal boundaries in magnetotail particle dynamics

It has been recently established that particle dynamics in the magnetotail geometry can be described as a nonintegrable Hamiltonian system with well-defined entry and exit regions through which stochastic orbits can enter and exit the system after repeatedly crossing the equatorial plane. It is shown that the phase space regions occupied by orbits of different numbers of equatorial crossings or different exit modes are separated by fractal boundaries. The fractal boundaries in an entry region for stochastic orbits are examined and the capacity dimension is determined.

Chen, J.↗

Development of efficient computer program for dynamic simulation of telerobotic manipulation

Research in robot control has generated interest in computationally efficient forms of dynamic equations for multi-body systems. For a simply connected open-loop linkage, dynamic equations arranged in recursive form were found to be particularly efficient. A general computer program capable of simulating an open-loop manipulator with arbitrary number of links has been developed based on an efficient recursive form of Kane's dynamic equations. Also included in the program is some of the important dynamics of the joint drive system, i.e., the rotational effect of the motor rotors. Further efficiency is achieved by the use of symbolic manipulation program to generate the FORTRAN simulation program tailored for a specific manipulator based on the parameter values given. The formulations and the validation of the program are described, and some results are shown.

Chen, J.↗

Collisionless tearing instability of a bi-Maxwellian neutral sheet - An integrodifferential treatment with exact particle orbits

The integrodifferential equation describing the linear tearing instability in the bi-Maxwellian neutral sheet is solved without approximating the particle orbits or the eigenfunction psi. Results of this calculation are presented. Comparison between the exact solution and the three-region approximation motivates the piecewise-straight-line approximation, a simplification that allows faster solution of the integrodifferential equation, yet retains the important features of the exact solution.

Burkhart, G. R.↗

Microwave time delays for the X/S-band feed system at X-band

The X-band time delays for the X/S feed system of the 34-meter high efficiency antenna are required to refine current X-band downlink (8450 plus or minus 50 MHz) calibrations and prepare for the Magellan uplink (7190 plus or minus 45 MHz). The time delays of elements in the X-band feed system are obtained mostly via computer calculation and partly via measurement. The methods used and results obtained are presented. There is good agreement with theory.

Chen, J.↗

Microwave time delays for the dual L-C-band feed system

A new dual-frequency feed system at Goldstone is designed to receive the Phobos spacecraft signal at L-band (1668 + or - 40 MHz) and transmit to the spacecraft at C-band (5008.75 + or - 5.00 MHz) simultaneously. Hence, calculations of the time delay from the C-band range calibration coupler to the phase center of the L-C dual feed and back to the L-band range calibration coupler are required to correct the range measurements. Time delays of the elements in the dual-frequency feed system are obtained mostly from computer calculations and partly from experimental measurements. The method used and results obtained are described.

Chen, J.↗

The effects of gear reduction on robot dynamics

The effect of the joint drive system with gear reduction for a generic two-link system is studied. It is done by comparing the kinetic energy of such a system with that of a direct drive two-link system. The only difference are two terms involving the inertia of the motor rotor and gear ratio. Modifications of the equations of motion from a direct drive system are then developed and generalized to various cases encountered in robot manipulators.

Chen, J.↗

Cross-guide coupler modeling and design

Modeling of cross-guide couplers based on the theory of equivalent electric and magnetic dipoles of an aperture is described. Additional correction factors due to nonzero wall thickness and large aperture are also included in this analysis. Comparisons of the measured and calculated results are presented for cross-guide couplers with circular or cross-shaped coupling apertures. A cross-guide coupler was designed as a component of the C-band feed to support the Phobos mission.

Chen, J.↗

Contact regrowth technique for low-resistance nonalloyed contacts to the hot-electron transistor

A novel contact regrowth technique for the formation of extremely low nonalloyed ohmic contacts is reported. The successful demonstration of this technique is reported on an InGaAs/InAlAs hot-electron transistor device. For the investigated InGaAs-based structure, the regrown contacting scheme reported includes an In(0.53)Ga(0.47)As layer, an InAs/GaAs strained-layer superlattice, and an InAs cap, all heavily doped n type with Si. A very low specific contact resistance of 1.8 x 10 to the -7th ohm sq cm to the base layer is obtained. The higher current densities achieved in the transistor characteristics are in close agreement with calculations, and a contact model is presented explaining the poor results of conventional nonalloyed contacts.

Peng, C. K.↗

A quadratic-form analysis of the collisionless tearing mode

A method for studying collisionless tearing mode properties in cases where complicated orbit integrals must be evaluated is presented. The method is based on a quadratic form of a self-adjoint integrodifferential operator. The collisionless tearing instability in a non-Maxwellian neutral sheet is used to illustrate the advantages of the present method.

Chen, J.↗

Extremely low nonalloyed and alloyed contact resistance using an InAs cap layer on InGaAs by molecular-beam epitaxy

Extremely low alloyed and nonalloyed ohmic contact resistances have been formed on n-type InAs/In(0.53)Ga(0.47)As/In(0.52)Al(0.48)As structures grown on InP(Fe) by molecular-beam epitaxy. To insure the accuracy of the small contact resistances measured, an extended transmission line model was used to extrapolate contact resistances from test patterns with multiple gap spacings varying from 1 to 20 microns. For a 150-A-thick InAs layer doped to 2 x 10 to the 18th/cu cm and a 0.1-micron-thick InGaAs layer doped to 1 x 10 to the 18th/cu cm, a specific contact resistance of 2.6 x 10 to the -8th ohm-asterisk sq cm was measured for the nonalloyed contact, while a resistance less than 1.7 x 10 to the -8th ohm-asterisk sq cm is reported for the alloyed contact. Conventional Au-Ge/Ni/Au was used for the ohmic metal contact and alloying was performed at 500 C for 50 s in flowing H2. Using a thermionic field emission model, the barrier height at the InAs/InGaAs interface was calculated to be 20 meV.

Peng, C. K.↗

Characteristics of annealed p/n junctions between GaAs and Si(100)

Electrical characteristics of a GaAs(p)/Si(n) interface were determined from capacitance-voltage, current-voltage, and secondary ion mass spectroscopy (SIMS) measurements and compared to those on GaAs(p) epitaxial layers on GaAs(n) substrates. The comparison was made between the junctions as grown, and after an anneal at 850 C for 20 min in 10 percent forming gas under an As overpressure. For the GaAs/Si junction the ideality factor changed from 2 or larger to 1.5 and the apparent intercept voltage changed from 2.5 to 1.3 V after annealing. For the GaAs homojunction, the intercept voltage increased from 1.1 to 1.3 V. In addition, the excess current in the forward and reverse bias conditions dropped drastically in the heterojunction. No movement of the metallurgical junction was discernible to within the resolution capability of SIMS. The junction properties obtained by annealing suggest an atomic restructuring of the Si(100) interface during growth or annealing. These new results raise the possibility that the GaAs/Si interface can be made into an electrically viable junction and incorporated into active devices.

Unlu, M. S.↗