Engineering Papers⌕ Search

Engineering topics

Chen, J.

Publications and source records attributed to Chen, J..

At least 289 records · Page 16

Non-precious metal electrocatalysts with high activity for hydrogen oxidation reaction in alkaline electrolytes

A ternary metallic CoNiMo catalyst is electrochemically deposited on a polycrystalline gold (Au) disk electrode using pulse voltammetry, and characterized for hydrogen oxidation reaction (HOR) activity by temperature-controlled rotating disk electrode measurements in 0.1 M potassium hydroxide (KOH). The catalyst exhibits the highest HOR activity among all non-precious metal catalysts (e.g., 20 fold higher than Ni). At a sufficient loading, the CoNiMo catalyst is expected to outperform Pt and thus provides a promising low cost pathway for alkaline or alkaline membrane fuel cells. Density functional theory (DFT) calculations and parallel H-2-temperature programmed desorption (TPD) experiments on structurally much simpler model alloy systems show a trend that CoNiMo has a hydrogen binding energy (HBE) similar to Pt and much lower than Ni, suggesting that the formation of multi-metallic bonds modifies the HBE of Ni and is likely a significant contributing factor for the enhanced HOR activity.

Sheng, WC↗

Plasma studies of the permanent magnet electron cyclotron resonance ion source at Peking University

At Peking University (PKU) we have developed several 2.45 GHz Permanent Magnet Electron Cyclotron Resonance ion sources for PKUNIFTY, SFRFQ, Coupled RFQ and SFRFQ, and Dielectric-Wall Accelerator (DWA) projects (respectively, 50 mA of D{sup +}, 10 mA of O{sup +}, 10 mA of He{sup +}, and 50 mA of H{sup +}). In order to improve performance of these ion sources, it is necessary to better understand the principal factors that influence the plasma density and the atomic ion fraction. Theoretical analysis about microwave transmission and cut-off inside the discharge chamber were carried out to study the influence of the discharge chamber diameters. As a consequence, experimental studies on plasma density and ion fraction with different discharge chamber sizes have been carried out. Due to the difficulties in measuring plasma density inside the discharge chamber, the output beam current was measured to reflect the plasma density. Experimental results show that the plasma density increases to the maximum and then decreases significantly as the diameter changed from 64 mm to 30 mm, and the atomic ion fraction has the same tendency. The maximum beam intensity was obtained with the diameter of 35 mm, but the maximum atomic ion fraction with a diameter of 40 mm. The experimental results are basically accordant with the theoretical calculation. Details are presented in this paper.

43 PARTICLE ACCELERATORS↗

Handling radiation generated during an ion source commissioning

Radiation is an important issue, which should be carefully treated during the design and commissioning of an ion source. Measurements show that X-rays are generated around the ceramics column of an extraction system when the source is powered up to 30 kV. The X-ray dose increases greatly when a beam is extracted. Inserting the ceramic column into a metal vacuum box is a good way to block X-ray emission for those cases. Moreover, this makes the online test of an intense H{sup +} ion beam with energy up to 100 keV possible. However, for deuteron ion source commissioning, neutron and gamma-ray radiation become a serious topic. In this paper, we will describe the design of the extraction system and the radiation doses of neutrons and gamma-rays measured at different D{sup +} beam energy during our 2.45 GHz deuteron electron cyclotron resonance ion source commissioning for PKUNIFTY (PeKing University Neutron Imaging FaciliTY) project at Peking University.

43 PARTICLE ACCELERATORS↗

Magnetic and dielectric properties of Aurivillius phase Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4)

We investigate the structural, magnetic, and dielectric properties of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4). The room-temperature ferromagnetism is observed in the Nb and Co co-doped samples compared with the paramagnetic behavior in Bi{sub 6}Fe{sub 2}Ti{sub 3}O{sub 18}. The ferromagnetism in Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} can be understood in terms of spin canting of the antiferromagnetic coupling of the Fe-based and Co-based sublattices via Dzyaloshinsky-Moriya interaction. Moreover, doping Co at Ti sites can significantly enhance the ferromagnetic Curie temperature compared with the substitution of Co for Fe in the Aurivillius compounds. The dielectric loss of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0.1 ≤ x ≤ 0.4) exhibits a relaxation process. The rather large activation energy in the 0.1 ≤ x ≤ 0.3 samples implies that the relaxation process is not due to the thermal motion of oxygen vacancies inside ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of the large magnetocaloric effect and suppression of orbital entropy change in Fe-doped MnV{sub 2}O{sub 4}

We present the structural and magnetic properties of Mn{sub 1−x}Fe{sub x}V{sub 2}O{sub 4} (x = 0.1, 0.2, and 0.3), and investigate the magnetocaloric effect in those compounds. The ferrimagnetic spin ordering is enhanced with the Fe doping at Mn site of MnV{sub 2}O{sub 4}, while the orbital ordering is suppressed. Large magnetic entropy changes up to 3.8 J/kg K as well as the relative cooling power up to 110 J/kg at the field change of 0-2 T for Mn{sub 1−x}Fe{sub x}V{sub 2}O{sub 4} are calculated from the isothermal magnetization measurements. The large orbital entropy change of MnV{sub 2}O{sub 4} is suppressed by the Fe doping, while the spin entropy contribution arising from the strong spin-orbit coupling remains. Moreover, the doping of Fe broadens the temperature span of the large magnetic entropy change and increases the relative cooling power of MnV{sub 2}O{sub 4} by 2.4 times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast Multiresolution Reads of Massive Simulation Datasets

Today’s massively parallel simulation codes can produce output ranging up to many terabytes of data. Utilizing this data to support scientific inquiry requires analysis and visualization, yet the sheer size of the data makes it cumbersome or impossible to read without computational resources similar to the original simulation. We identify two broad classes of problems for reading data and present effective solutions for both. The first class of data reads depends on user requirements and available resources. Tasks such as visualization and user-guided analysis may be accomplished using only a subset of variables with a restricted spatial extent at a reduced resolution. The other class of reads requires full resolution multivariate data to be loaded, for example to restart a simulation. We show that utilizing the hierarchical multiresolution IDX data format enables scalable and efficient serial and parallel read access on a variety of hardware from supercomputers down to portable devices. Here, we demonstrate interactive view-dependent visualization and analysis of massive scientific datasets using low-power commodity hardware, and we compare read performance with other parallel file formats for both full and partial resolution data.

97 MATHEMATICS AND COMPUTING↗

Effect of Sb incorporation on structure and magnetic properties of quaternary ferromagnetic semiconductor (Ga, Mn)(As, Sb) thin films

GaAs-based quaternary ferromagnetic semiconductor (Ga, Mn)(As, Sb) has been successfully prepared by molecular-beam epitaxy. High-resolution x-ray diffraction measurements indicate that the lattice constant has a notable alteration with changing Sb content. Magnetic measurements demonstrate the same evolution of the Curie temperature T{sub C} and the effective Mn content x{sub eff} with increasing Sb content. The incorporation of low Sb content is of benefit to increasing x{sub eff}, thus, increasing T{sub C}. However, higher Sb content degrades the crystal quality, resulting in a decrease of x{sub eff}. Experimental results show that T{sub C} is proportional to the product of x{sub eff} and p{sup 1/3}, which is consistent with the Zener Model. The exchange energy N{sub 0}β is calculated to be −1.09 eV, which is similar to that of (Ga, Mn)As.

36 MATERIALS SCIENCE↗