Engineering Papers⌕ Search

Engineering topics

Chen, Hailong

Publications and source records attributed to Chen, Hailong.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Li 2.9 Fe 0.9 Zr 0.1 Cl 6 as Redox-Active Catholyte for Solid-State Li-Ion Batteries

Solid electrolytes are one of the key challenges that hinder the commercialization of all-solid-state batteries. Most efforts have been made to advance the development of solid electrolytes as separators, while the development of catholytes, particularly redox-active catholytes, has been less extensively studied. The high loading of catholytes in composite cathodes, while facilitating ionic conduction, drastically decreases the energy density of the battery. Here, we report an alternative strategy to improve the energy density by using Li 2.9 Fe 0.9 Zr 0.1 Cl 6 as a redox-active catholyte. With a composite cathode containing uncoated LiCoO2 and Li 2.9 Fe 0.9 Zr 0.1 Cl 6 , the solid-state cell not only shows excellent rate capability and stable long-term cycling, benefiting from the high ionic conductivity of Li 2.9 Fe 0.9 Zr 0.1 Cl 6 , but also shows a high cathode specific capacity of ~153 mAh·g –1 . This study broadens the chemical space of the materials design for lithium-ion conductors with redox-active elements (e.g., Fe, Ti, V, and Cr), offering new opportunities to reduce the cost and improve the energy density for all-solid-state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning collective anion motion enables superionic conductivity in solid-state halide electrolytes

Halides of the family Li 3 MX 6 (M = Y, In, Sc and so on, X = halogen) are emerging solid electrolyte materials for all-solid-state Li-ion batteries. They show greater chemical stability and wider electrochemical stability windows than existing sulfide solid electrolytes, but have lower room-temperature ionic conductivities. Here, in this work, we report the discovery that the superionic transition in Li 3 YCl 6 is triggered by the collective motion of anions, as evidenced by synchrotron X-ray and neutron scattering characterizations and ab initio molecular dynamics simulations. Based on this finding, we used a rational design strategy to lower the transition temperature and thus improve the room-temperature ionic conductivity of this family of compounds. We accordingly synthesized Li 3 YCl x Br 6-x and Li 3 GdCl 3 Br 3 and achieved very high room-temperature conductivities of 6.1 and 11 mS cm -1 for Li 3 YCl 4.5 Br 1.5 and Li 3 GdCl 3 Br 3 , respectively. These findings open new routes to the design of room-temperature superionic conductors for high-performance solid batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Low-cost iron trichloride cathode for all-solid-state lithium-ion batteries

The dominant chemistries of lithium-ion batteries on the market today still rely on flammable organic liquid electrolytes and cathodes containing scarce metals, such as cobalt or nickel, raising safety, cost and environmental concerns. Here we show a FeCl 3 cathode that costs as little as 1% of the cost of a LiCoO 2 cathode or 2% of a LiFePO 4 cathode. Once coupled with a solid halide electrolyte and a lithium-indium (Li–In) alloy anode, it enables all-solid-state lithium-ion batteries without any liquid components. Notably, FeCl 3 exhibits two flat voltage plateaux between 3.5 and 3.8 V versus Li + /Li, and the solid cell retains 83% of its initial capacity after 1,000 cycles with an average Coulombic efficiency of 99.95%. Combined neutron diffraction and X-ray absorption spectroscopy characterizations reveal a Li-ion (de)intercalation mechanism together with a Fe 2+ /Fe 3+ redox process. Further, our work provides a promising avenue for developing sustainable battery technologies with a favourable balance of performance, cost and safety.

25 ENERGY STORAGE↗
DOE OSTI2024

A mixed formulation of the plane-stress problem to facilitate reuse of constitutive models in finite-element programs

Here, the plane-stress assumption can be challenging to support in a finite element program because it traditionally requires separate implementations of constitutive models than those intended for three-dimensional or two-dimensional plane-strain simulations. As a solution to this issue, this paper presents a method to solve the plane-stress problem using a mixed formulation. In this formulation, the out-of-plane strain is treated as a field variable that is solved for in addition to the standard in-plane displacement variables, in a manner that weakly enforces the condition that the out-of-plane stress is zero. The proposed formulation is non-intrusive, requiring no modifications to the constitutive models in contrast to the conventional plane-stress formulation. The proposed mixed formulation has been benchmarked against analytical solutions and numerical solutions, with good performance and accuracy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Electrochemically Dealloyed 3D Porous Copper Nanostructure as Anode Current Collector of Li-Metal Batteries

The commercialization of high-energy Li-metal batteries is impeded by Li dendrites formed during electrochemical cycling and the safety hazards it causes. Here, a novel porous copper current collector that can effectively mitigate the dendritic growth of Li is reported. This porous Cu foil is fabricated via a simple two-step electrochemical process, where Cu-Zn alloy is electrodeposited on commercial copper foil and then Zn is electrochemically dissolved to form a 3D porous structure of Cu. The 3D porous Cu layers on average have a thickness of ≈14 um and porosity of ≈72%. This current collector can effectively suppress Li dendrites in cells cycled with a high areal capacity of 10 mAh cm -2 and under a high current density of 10 mA cm -2 . This electrochemical fabrication method is facile and scalable for mass production. In conclusion, results of advanced in situ synchrotron X-ray diffraction reveal the phase evolution of the electrochemical deposition and dealloying processes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Precisely modulate interfacial Bi-O bridge bond in Co-TCPP/Bi 3 O 4 Br to trigger long-lasting charge separation for boosting CO 2 photoreduction

Insufficient charge separation and feeble CO 2 activation limit the CO 2 photoreduction efficiency. It is highly desirable to consciously construct organic–inorganic hybrid composites to simultaneously accelerate charge separation and provide favorable active sites. Herein, a defect-induced interfacial Bi-O bridge bond is constructed by grafting terminal O of cobalt porphyrin (Co-TCPP) with Bi 3 O4Br. Systematic investigations reveal that the Bi-O bridge bond as the charge migration bridge accelerates the extraction and transfer of electron from the external [Bi 3 O 4 ] layers to Co-TCPP, and the millisecond separation lifetime of electrons on Co-TCPP can be achieved. Co atoms as the active sites optimized the CO 2 adsorption and activation, thus promoting the formation of COOH*. As a result, the CO 2 photoreduction rate of 0.5% Co-TCPP/Bi 3 O4Br reaches 71.3 μmol g -1 h -1 in pure water, 2.53-fold of that on the pristine Bi 3 O4Br. This work provides atomistic insights and strategies for the construction of new organic–inorganic hybrid materials for artificial photosynthesis and CO 2 photoreduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Polymorphism of Cobalt Nanoparticles Formed in Electrodeposition–An In Situ XRD Study

An advanced synchrotron-based in situ X-ray diffraction (XRD) technique is successfully developed and employed to track and monitor the formation and phase selection of cobalt (Co) in electrodeposition in real time and verify DFT computational results. The impacts of a number of controlling factors including the pH of the electrolyte and deposition overpotential are systematically studied. The results show that the yielded phase of the electrodeposited Co is controlled by both thermodynamics and kinetics. The low pH low overpotential condition favors the formation of the thermodynamically stable fcc phase. While the high pH high overpotential condition promotes the formation of the metastable hcp phase. The experimental results agree well with the nanometric phase diagram computed with DFT. Layer-by-layer alternative stacking of fcc-hcp polymorphic phases can be facilely fabricated by just varying the overpotential. This work not only offers an effective means to control the phase of electroplating of Co but also presents a new approach to reveal the fundamental insights of the formation of metals under electrochemical reduction driving force.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Degradation by Kinking in Layered Cathode Materials

Layered cathode materials are commonly used in lithium and sodium ion batteries, but they are prone to degradation under electrochemical cycling during battery operation. Here we report a new type of degradation mechanism through the electrochemically induced mechanical buckling and delamination cracking of intercalation layers in a P2 Na 0.7 -Ni 0.3 Mn 0.6 Co 0.1 O 2 (Na-NMC) cathode material. Kinks form in the delaminated layers due to severe local bending, and each kink consists of a vertical array of dislocations, resulting from an easy slip between transition metal oxide layers. In situ mechanical compression experiments directly reveal the kink formation due to strong mechanical anisotropy parallel and perpendicular to the intercalation layers in single-crystal Na-NMC. In situ electrochemical experiments indicate that kinks form during the desodiation process. Our results unveil a new mechanism of electrochemically induced mechanical degradation stemming from weak interlayer bonding in layered cathode materials. In conclusion, this work has broad implications for the mitigation of degradation associated with irreversible interlayer slip in layered cathode materials.

25 ENERGY STORAGE↗