Engineering Papers⌕ Search

Engineering topics

Chen, Gang

Publications and source records attributed to Chen, Gang.

At least 163 records · Page 9

Nonperturbative Quantum Nature of the Dislocation–Phonon Interaction

Despite the long history of dislocation–phonon interaction studies, there are many problems that have not been fully resolved during this development. These include an incompatibility between a perturbative approach and the long-range nature of a dislocation, the relation between static and dynamic scattering, and their capability of dealing with thermal transport phenomena for bulk material only. Here in this paper, by utilizing a fully quantized dislocation field, which we called a “dislon”, a phonon interacting with a dislocation is renormalized as a quasi-phonon, with shifted quasi-phonon energy, and accompanied by a finite quasi-phonon lifetime, which are reducible to classical results. A series of outstanding legacy issues including those above can be directly explained within this unified phonon renormalization approach. For instance, a renormalized phonon naturally resolves the decade-long debate between dynamic and static dislocation–phonon scattering approaches, as two limiting cases. In particular, at nanoscale, both the dynamic and static approaches break down, while the present renormalization approach remains valid by capturing the size effect, showing good agreement with lattice dynamics simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical systems configured to harvest heat energy

Electrochemical systems for harvesting heat energy, and associated electrochemical cells and methods, are generally described. The electrochemical cells can be configured, in certain cases, such that at least a portion of the regeneration of the first electrochemically active material is driven by a change in temperature of the electrochemical cell. The electrochemical cells can be configured to include a first electrochemically active material and a second electrochemically active material, and, in some cases, the absolute value of the difference between the first thermogalvanic coefficient of the first electrochemically active material and the second thermogalvanic coefficient of the second electrochemically active material is at least about 0.5 millivolts/Kelvin.

30 DIRECT ENERGY CONVERSION↗

Thermoelectric Properties of n-type ZrNiPb-Based Half-Heuslers

Here we investigate the half-Heusler ZrNiPb as a n-type thermoelectric material. Our results show that the n-type ZrNiPb-based materials can achieve high peak power factors, ~50 μW cm –1 K –2 , by optimally tuning the carrier concentration via Bi doping. By further Sn-alloying in Pb site, we achieve a significant reduction of lattice thermal conductivity while maintaining the power factor almost unchanged and hence noticeably improve the ZT. Our work demonstrates that n-type ZrNiPb-based half-Heuslers are promising thermoelectric materials.

36 MATERIALS SCIENCE↗

The effect of shallow vs. deep level doping on the performance of thermoelectric materials

It is well known that the efficiency of a good thermoelectric material should be optimized with respect to doping concentration. However, much less attention has been paid to the optimization of the dopant’s energy level. Thermoelectric materials doped with shallow levels may experience a dramatic reduction in their figures of merit at high temperatures due to the excitation of minority carriers that reduces the Seebeck coefficient and increases bipolar heat conduction. Doping with deep level impurities can delay the excitation of minority carriers as it requires a higher temperature to ionize all dopants. We find through modeling that, depending on the material type and temperature range of operation, different impurity levels (shallow or deep) will be desired to optimize the efficiency of a thermoelectric material. For different materials, we further clarify where the most preferable position of the impurity level within the bandgap falls. In this work, our research provides insight on why different dopants often affect thermoelectric transport properties differently and directions in searching for the most appropriate dopants for a thermoelectric material in order to maximize the device efficiency.

36 MATERIALS SCIENCE↗

Barotropic and Baroclinic Eddy Feedbacks in the Midlatitude Jet Variability and Responses to Climate Change–Like Thermal Forcings

Abstract Studies have suggested that the persistence in the meridional vacillation of the midlatitude jet (i.e., annular mode time scale) in comprehensive climate models is related to the model biases in climatological jet latitude, with important implications for projections of future climates and midlatitude weather events. Through the use of the recently developed finite-amplitude wave activity formalism and feedback quantifying techniques, this paper has quantified the role of barotropic and baroclinic eddy feedbacks in annular mode time scales using an idealized dry atmospheric model. The eddy–mean flow interaction that characterizes the persistent anomalous state of the midlatitude jet depends on processes associated with the lower-tropospheric source of vertically propagating Rossby waves, baroclinic mechanisms, and processes associated with upper-tropospheric wave propagation and breaking, barotropic mechanisms. A variety of climate change–like thermal forcings are used to generate a range of meridional shifts in the midlatitude eddy-driven jet. The idealized model shows a reduction in annular mode time scale associated with an increase in jet latitude, similar to comprehensive climate models. This decrease in time scale can be attributed to a similar decrease in the strength of the barotropic eddy feedback, which, in the positive phase of the annular mode, is characterized by anomalous potential vorticity (PV) mixing on the equatorward flank of the climatological jet. The decrease in subtropical PV mixing is, in turn, associated with a stronger subtropical jet as the eddy-driven jet is more distant from the subtropics. These results highlight the importance of subtropical eddy–mean flow interactions for the persistence of an eddy-driven jet.

54 ENVIRONMENTAL SCIENCES↗

Anderson Localization of Thermal Phonons Leads to a Thermal Conductivity Maximum

Our elastic model of ErAs disordered GaAs/AlAs superlattices exhibits a local thermal conductivity maximum as a function of length due to exponentially suppressed Anderson-localized phonons. By analyzing the sample-to-sample fluctuations in the dimensionless conductance, g, the transition from diffusive to localized transport is identified as the crossover from the multichannel to single-channel transport regime g ≈ 1. Single parameter scaling is shown to hold in this crossover regime through the universality of the probability distribution of g that is independent of system size and disorder strength.

42 ENGINEERING↗

Evidence for a spinon Fermi surface in a triangular-lattice quantum-spin-liquid candidate

A quantum spin liquid is an exotic quantum state of matter in which spins are highly entangled and remain disordered down to zero temperature. Such a state of matter is potentially relevant to high-temperature superconductivity and quantum-information applications, and experimental identification of a quantum spin liquid state is of fundamental importance for our understanding of quantum matter. Theoretical studies have proposed various quantum-spin-liquid ground states, most of which are characterized by exotic spin excitations with fractional quantum numbers (termed ‘spinons’). In this paper, we report neutron scattering measurements of the triangular-lattice antiferromagnet YbMgGaO 4 that reveal broad spin excitations covering a wide region of the Brillouin zone. The observed diffusive spin excitation persists at the lowest measured energy and shows a clear upper excitation edge, consistent with the particle–hole excitation of a spinon Fermi surface. Finally, our results therefore point to the existence of a quantum spin liquid state with a spinon Fermi surface in YbMgGaO 4 , which has a perfect spin-1/2 triangular lattice as in the original proposal of quantum spin liquids.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Achieving high power factor and output power density in p-type half-Heuslers Nb 1-x Ti x FeSb

Significance Thermoelectric technology can boost energy consumption efficiency by converting some of the waste heat into useful electricity. Heat-to-power conversion efficiency optimization is mainly achieved by decreasing the thermal conductivity in many materials. In comparison, there has been much less success in increasing the power factor. We report successful power factor enhancement by improving the carrier mobility. Our successful approach could suggest methods to improve the power factor in other materials. Using our approach, the highest power factor reaches ∼106 μW⋅cm −1 ⋅K −2 at room temperature. Such a high power factor further yields a record output power density in a single-leg device tested between 293 K and 868 K, thus demonstrating the importance of high power factor for power generation applications.

36 MATERIALS SCIENCE↗

Quantitative analyses of enhanced thermoelectric properties of modulation-doped PEDOT:PSS/undoped Si (001) nanoscale heterostructures

Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) has high electrical conductivity (~10 3 S cm –1 ) but it demonstrates a low Seebeck coefficient (<15 μV K –1 ), resulting in a low power factor. Mixing PEDOT:PSS with nanostructured semiconductors can enhance the Seebeck coefficient and achieve an improved thermoelectric power factor. Yet, underlying mechanisms for those composite thermoelectric systems are scarcely understood so far. Here, quantitative analyses on the electrical conductivity and Seebeck coefficient for the heterostructures of nanometer-thick PEDOT:PSS on single-crystal Si (001) on sapphire (SOS) are reported. The heterostructures have larger Seebeck coefficients up to 7.3 fold and power factors up to 17.5 fold relative to PEDOT:PSS. The electrical conductivity increased with decreasing combined thicknesses of PEDOT:PSS and Si, and the Seebeck coefficient increased with decreasing PEDOT:PSS thickness, which can be attributed to modulation doping caused by diffusion of holes from PEDOT:PSS into undoped Si. This hypothesis is supported by simulation per band alignment. The valence band offset between Si and PEDOT:PSS dominantly controls the electrical conductivity and Seebeck coefficient of the heterostructures. This study not only suggests mechanistic insights to increase the power factors of PEDOT:PSS-based composites but also opens the door for new strategies to enhance the thermoelectric efficiencies of heterostructured nanocomposite materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Entropic and near-field improvements of thermoradiative cells

A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the efficiency of thermoradiative cells via spectrally selecting long-wavelength photons for radiative exchange. Furthermore, we predict that the near-field photon extraction by coupling photons generated from interband electronic transition to phonon polariton modes on the surface of a heat sink can increase the conversion efficiency as well as the power generation density, providing more opportunities to efficiently utilize terrestrial emission for clean energy. An ideal InSb thermoradiative cell can achieve a maximum efficiency and power density up to 20.4% and 327 Wm -2 , respectively, between a hot source at 500 K and a cold sink at 300 K. Furthermore, sub-bandgap and non-radiative losses will significantly degrade the cell performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward a High-Efficient Utilization of Solar Radiation by Quad-Band Solar Spectral Splitting

The promising quad-band solar spectral splitter incorporates the properties of the optical filter and the spectrally selective solar thermal absorber can direct PV band to PV modules and absorb thermal band energy for thermal process with low thermal losses. Finally, it provides a new strategy for spectral splitting and offers potential ways for hybrid PVT system design.

14 SOLAR ENERGY↗

Photo-excited charge carriers suppress sub-terahertz phonon mode in silicon at room temperature

There is a growing interest in the mode-by-mode understanding of electron and phonon transport for improving energy conversion technologies, such as thermoelectrics and photovoltaics. Whereas remarkable progress has been made in probing phonon–phonon interactions, it has been a challenge to directly measure electron–phonon interactions at the single-mode level, especially their effect on phonon transport above cryogenic temperatures. Here in this paper, we use three-pulse photoacoustic spectroscopy to investigate the damping of a single sub-terahertz coherent phonon mode by free charge carriers in silicon at room temperature. Building on conventional pump–probe photoacoustic spectroscopy, we introduce an additional laser pulse to optically generate charge carriers, and carefully design temporal sequence of the three pulses to unambiguously quantify the scattering rate of a single-phonon mode due to the electron–phonon interaction. Our results confirm predictions from first-principles simulations and indicate the importance of the often-neglected effect of electron–phonon interaction on phonon transport in doped semiconductors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Localized solar collectors

A localized heating structure, and method of forming same, for use in solar systems includes a thermally insulating layer having interconnected pores, a density of less than about 3000 kg/m.sup.3, and a hydrophilic surface, and an expanded carbon structure adjacent to the thermally insulating layer. The expanded carbon structure has a porosity of greater than about 80% and a hydrophilic surface.

14 SOLAR ENERGY↗

Weyl magnons in breathing pyrochlore antiferromagnets

Frustrated quantum magnets not only provide exotic ground states and unusual magnetic structures, but also support unconventional excitations in many cases. Using a physically relevant spin model for a breathing pyrochlore lattice, we discuss the presence of topological linear band crossings of magnons in antiferromagnets. These are the analogues of Weyl fermions in electronic systems, which we dub Weyl magnons. The bulk Weyl magnon implies the presence of chiral magnon surface states forming arcs at finite energy. We argue that such antiferromagnets present a unique example, in which Weyl points can be manipulated in situ in the laboratory by applied fields. We discuss their appearance specifically in the breathing pyrochlore lattice, and give some general discussion of conditions to find Weyl magnons, and how they may be probed experimentally. Our work may inspire a re-examination of the magnetic excitations in many magnetically ordered systems.

36 MATERIALS SCIENCE↗

Concentrating solar thermoelectric generators with a peak efficiency of 7.4%

Concentrating solar power normally employs mechanical heat engines and is thus only used in large-scale power plants; however, it is compatible with inexpensive thermal storage, enabling electricity dispatchability. Concentrating solar thermoelectric generators (STEGs) have the advantage of replacing the mechanical power block with a solid-state heat engine based on the Seebeck effect, simplifying the system. The highest reported efficiency of STEGs so far is 5.2%. We report experimental measurements of STEGs with a peak efficiency of 9.6% at an optically concentrated normal solar irradiance of 211 kW m -2 , and a system efficiency of 7.4% after considering optical concentration losses. The performance improvement is achieved by the use of segmented thermoelectric legs, a high-temperature spectrally selective solar absorber enabling stable vacuum operation with absorber temperatures up to 600 °C, and combining optical and thermal concentration. Our work suggests that concentrating STEGs have the potential to become a promising alternative solar energy technology.

14 SOLAR ENERGY↗