Engineering Papers⌕ Search

Engineering topics

Chen, Gang

Publications and source records attributed to Chen, Gang.

At least 73 records · Page 4

Optical properties of cubic boron arsenide

The ultrahigh thermal conductivity of cubic boron arsenide (BAs) makes it a promising material for next-generation electronics and optoelectronics. Here, we report measured optical properties of BAs crystals, including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. In this work, the data were collected at room temperature using spectroscopic ellipsometry and transmission and reflection spectroscopy. We further calculated the optical response using density functional theory and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect bandgaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings pave the way for using BAs in future electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.

74 ATOMIC AND MOLECULAR PHYSICS↗

Sensitivity of the latitude of the westerly jet stream to climate forcing

The latitude of the westerly jet stream is influenced by a variety of climate forcings. Their effects often manifest as a tug-of-war between tropical forcing, characterized by tropical upper-tropospheric warming, and polar forcing, with a signature of Antarctic stratospheric cooling or Arctic amplification. Here we present a unified forcing-feedback frame work relating different climate forcings to their forced jet changes, in which the interactions between the westerly jet and synoptic storms are synthesized by a zonal advection feedback, analogous to the feedback framework for assessing climate sensitivity. This framework is supported by a prototype feedback analysis in the atmospheric dynamical core of a climate model with diverse thermal and mechanical forcings. Our analysis indicates that the latitude of a westerly jet is most sensitive to the thermally-induced jet speed changes near the tropopause. The jet shift also displays a larger sensitivity than linearity for the equatorward shift.

atmospheric dynamics, atmospheric variability, cli↗

Bi-directional tuning of thermal transport in SrCoO x with electrochemically induced phase transitions

Unlike the wide-ranging dynamic control of electrical conductivity, there does not exist an analogous ability to tune thermal conductivity by means of electric potential. The traditional picture assumes that atoms inserted into a material’s lattice act purely as a source of scattering for thermal carriers, which can only reduce thermal conductivity. In contrast, here we show that the electrochemical control of oxygen and proton concentration in an oxide provides a new ability to bi-directionally control thermal conductivity. On electrochemically oxygenating the brownmillerite SrCoO 2.5 to the perovskite SrCoO 3–δ , the thermal conductivity increases by a factor of 2.5, whereas protonating it to form hydrogenated SrCoO 2.5 effectively reduces the thermal conductivity by a factor of four. This bi-directional tuning of thermal conductivity across a nearly 10 ± 4-fold range at room temperature is achieved by using ionic liquid gating to trigger the ‘tri-state’ phase transitions in a single device. We elucidated the effects of these anionic and cationic species, and the resultant changes in lattice constants and lattice symmetry on thermal conductivity by combining chemical and structural information from X-ray absorption spectroscopy with thermoreflectance thermal conductivity measurements and ab initio calculations. This ability to control multiple ion types, multiple phase transitions and electronic conductivity that spans metallic through to insulating behaviour in oxides by electrical means provides a new framework for tuning thermal transport over a wide range.

36 MATERIALS SCIENCE↗

Projected Changes to Extreme Precipitation Along North American West Coast From the CESM Large Ensemble

Precipitation events along the North American (NA) west coast are strongly modulated by atmospheric rivers, yet the mechanisms of their influences on the probability distributions of precipitation events are not well studied. Simulations from the Community Earth System Model (CESM) large ensemble under global warming are investigated using a moisture budget conditioned onto precipitation events for the recurrence intervals ranging from 0.1 to 50 years. In the midlatitudes, the increases in precipitation intensity and accumulation for all events over the NA west coast are predominantly controlled by moisture increases. In contrast, changes in the subtropical precipitation distributions in southwestern NA are associated with moisture increases and duration decreases for all events, with additional dynamical amplification for the heaviest precipitation events. These interpretations from the conditional moisture budget are more consistent with future projection of atmospheric rivers than the conventional mean and transient decomposition of the moisture budget.

54 ENVIRONMENTAL SCIENCES↗

Fabrication of diatomite‐based microencapsulated flame retardant and its improved fire safety of unsaturated polyester resin

To achive excellent fire resistance, new microcapsule flame retardants (DMCAD and DMPPD) were prepared using 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide combined with melamine cyanurate or melamine polyphosphate as the shell material and diatomite as the core material. The successful assembly of DMCAD and DMPPD was detailed characterized by Fourier transform infrared (FT‐IR) spectra, X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Meanwhile, the flame retardancy and thermal stability of the unsaturated polyester resin (UPR)/DMCAD and UPR/DMPPD composites were also studied. The addition of DMCAD and DMPPD effectively improves the flame retardance properties of UPR, and the effect of DMPPD was better. The limiting oxygen index (LOI) of UPR/DMPPD‐3 increased by 11.6% when compared with that of UPR, and the sample achieved V‐0 rating. Moreover, the peak heat release rate (pHRR) and the total heat release (THR) rate of UPR/DMPPD‐3 were reduced by 67% and 26%, respectively. Under nitrogen condition and air condition, UPR/DMPPD showed better thermal stability and char‐forming ability from the thermogravimetric (TG) results. Residual char of the UPR composites was systematically analyzed with SEM and XPS. Finally, the flame retardant mechanism of DMPPD was proposed.

Chen, Gang↗

Constitutive Behavior and Hot Workability of a Hot Isostatic Pressed Ti-22Al-25Nb Alloy during Hot Compression

A Ti-22Al-25Nb alloy was fabricated from prealloyed powders by hot isostatic pressing for 2 h at a temperature of 1050 °C and pressure of 100 MPa. The hot deformation behavior of the Ti-22Al-25Nb alloy was characterized by isothermal compression testing at deformation temperatures between 900 and 1060 °C and strain rates between 0.001 and 1 s{sup −1}. Based on the true stress–strain curves, a constitutive equation was constructed to describe the flow stress as a function of the strain rate and deformation temperature. Three-dimensional (3D) processing maps were developed based on dynamic material model theory using the stress flow data to identify the instability and optimization regions of the hot processing parameters. The results show that the flow stress decreases with increasing deformation temperature and decreasing strain rate, and the softening mechanisms are different under different deformation conditions. The apparent activation energies in the (α{sub 2} + β/B2 + O) and (α{sub 2} + B2) phase regions are calculated to be 865.177 and 590.661 kJ/mol, respectively, which suggests that the hot isostatic pressed (HIPed) Ti-22Al-25Nb alloy requires a high hot deformation activation energy. Combined with microstructural observations, the optimal processing domains are determined to be a temperature range of 1030-1060 °C and strain rate range of 0.01-0.1 s{sup −1} in the α{sub 2} + B2 phase region. Moreover, the results indicate that adiabatic shear bands and severe inhomogeneous deformation cause flow instability at lower temperatures (900-1005 °C) and higher strain rates (> 0.1 s{sup −1}).

36 MATERIALS SCIENCE↗

Continuous fabrication system and method for highly aligned polymer films

Process for continuous fabrication of highly aligned polymer films. A polymer-solvent solution is subjected to a high shear, high temperature, Couette flow to extrude a thin film having polymer chain disentanglement. The extruded thin film is frozen and the solvent is allowed to evaporate to form a dried film. The dried film is mechanically drawn using a constant force, adaptive-thickness drawing system to align polymer molecular chains through plastic deformation. A suitable polymer is ultra-high molecular weight polyethylene.

36 MATERIALS SCIENCE↗

Understanding the Activity and Enantioselectivity of Acetyl-Protected Aminoethyl Quinoline Ligands in Palladium-Catalyzed β-C(sp 3 )–H Bond Arylation Reactions

Chiral acetyl-protected aminoalkyl quinoline (APAQ) ligands were recently discovered to afford highly active and enantiose-lective palladium catalysts for the arylation of methylene C(sp 3 )-H bonds, and herein, we investigate the origins of these heightened properties. Unprecedented amide-bridged APAQ-Pd dimers were predicted by DFT calculations and were con-firmed by single crystal X-ray diffraction studies. Comparison of structural features between APAQ-Pd complexes and an acetyl-protected aminoethyl pyridine APAPy-Pd complex strongly suggests that the high activity of the former originates from the presence of the quinoline ring which slows the formation of the off-cycle palladium dimer. Furthermore, steric topographic maps for a representative subset of monomeric, monoligated palladium complexes allowed us to draw a unique parallel between the 3-dimensional structures of these catalysts and their reported asymmetric induction in β-C(sp 3 )-H bond arylation reactions. Lastly, cooperative non-covalent interactions present between the APAQ ligand and the substrate were identified as a crucial factor for imparting selectivity between chemically equivalent methylenic C(sp 3 )-H bonds prior to con-certed metalation deprotonation activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous Defect Dependence of Thermal Conductivity in Epitaxial WO 3 Thin Films

Lattice defects typically reduce lattice thermal conductivity, which has been widely exploited in applications such as thermoelectric energy conversion. Here, an anomalous dependence of the lattice thermal conductivity on point defects is demonstrated in epitaxial WO 3 thin films. Depending on the substrate, the lattice of epitaxial WO 3 expands or contracts as protons are intercalated by electrolyte gating or oxygen vacancies are introduced by adjusting growth conditions. Surprisingly, the observed lattice volume, instead of the defect concentration, plays the dominant role in determining the thermal conductivity. In particular, the thermal conductivity increases significantly with proton intercalation, which is contrary to the expectation that point defects typically lower the lattice thermal conductivity. The thermal conductivity can be dynamically varied by a factor of ≈1.7 via electrolyte gating, and tuned over a larger range, from 7.8 to 1.1 W m -1 K -1 , by adjusting the oxygen pressure during film growth. The electrolyte-gating-induced changes in thermal conductivity and lattice dimensions are reversible through multiple cycles. These findings not only expand the basic understanding of thermal transport in complex oxides, but also provide a path to dynamically control the thermal conductivity.

36 MATERIALS SCIENCE↗

Changes in Frequency of Large Precipitation Accumulations over Land in a Warming Climate from the CESM Large Ensemble: The Roles of Moisture, Circulation, and Duration

Projected changes in the frequency of major precipitation accumulations (hundreds of millimeters), integrated over rainfall events, over land in the late twenty-first century are analyzed in the Community Earth System Model (CESM) Large Ensemble, based on the RCP8.5 scenario. Accumulation sizes are sorted by the local average recurrence interval (ARI), ranging from 0.1 to 100 years, for the current and projected late-twenty-first-century climates separately. For all ARIs, the frequency of exceedance of the given accumulation size increases in the future climate almost everywhere, especially for the largest accumulations, with the 100-yr accumulation becoming about 3 times more frequent, averaged over the global land area. The moisture budget allows the impacts of individual factors—moisture, circulation, and event duration—to be isolated. In the tropics, both moisture and circulation cause large future increases, enhancing the 100-yr accumulation by 23% and 13% (average over tropical land), and are individually responsible for making the current-climate 100-yr accumulation 2.7 times and 1.8 times more frequent, but effects of shorter durations slightly offset these effects. In the midlatitudes, large accumulations become about 5% longer in duration, but are predominantly controlled by enhanced moisture, with the 100-yr accumulation (land average) becoming 2.4 times more frequent, and 2.2 times more frequent due to moisture increases alone. In some monsoon-affected regions, the 100-yr accumulation becomes more than 5 times as frequent, where circulation changes are the most impactful factor. These projections indicate that changing duration of events is a relatively minor effect on changing accumulations, their future enhancement being dominated by enhanced intensity (the combination of moisture and circulation).

54 ENVIRONMENTAL SCIENCES↗

Large-scale meteorological control on the spatial pattern of wintertime PM 2.5 pollution over China

The frequent episodes of severe air pollution over China during recent years have posed serious health threats to densely populated eastern China. Although several studies investigated the linkage between enhanced severity and frequency of air pol-lution and the large-scale weather patterns over China, the day-to-day covariability between them, as well as its local and remote mechanisms, has not been systemati-cally documented. The wintertime synoptic covariability between PM 2.5 and large-scale meteorological fields is studied using surface observations of PM 2.5 in 2013/2014–2016/2017 and ERA-Interim meteorological fields through maximum covariance analysis (MCA). The first MCA mode (MCA1) suggests a consistent accumulation of ambient PM 2.5 as a result of weakened winds that block the pollut-ant removal passage in heavily polluted areas of eastern China, as well as moist air from southeast coast favoring haze formation. A northeast–southwest belt that extends into northeastern China and central China on each end is more sensitive to MCA1. The second MCA mode (MCA2) shows a north–south dipole in PM 2.5 linked to the contrast of boundary layer height and surface wind speed between northern and southern regions of China. Spatial patterns of both modes are supported by the GEOS-Chem chemistry transport model with realistic emission inventory. The spatial patterns of the two modes are robust on the interannual time scales. Based on that, we investigate the variability of the first two modes of the identified modes on the multidecadal scale by projecting GPM_500 pattern to 1981–2010. Correlation analysis of the projected time series and climate indices over 30 years indicates the possible linkage of Arctic oscillation, ENSO indices, Pacific decadal oscillation and east Atlantic/western Russia to regional air pollution patterns over China.

54 ENVIRONMENTAL SCIENCES↗

Reversible intercalation of methyl viologen as a dicationic charge carrier in aqueous batteries

The interactions among charge carriers and electrode structures represent one of the most important considerations in the search for new energy storage devices. Currently, ionic bonding dominates the battery chemistry. In this work we report the reversible insertion of a large molecular dication, methyl viologen, into the crystal structure of an aromatic solid electrode, 3,4,9,10-perylenetetracarboxylic dianhydride. This is the largest insertion charge carrier when non-solvated ever reported for batteries; surprisingly, the kinetic properties of the (de) insertion of methyl viologen are excellent with 60% of capacity retained when the current rate is increased from 100 mA g -1 to 2000 mA g -1 . Characterization reveals that the insertion of methyl viologen causes phase transformation of the organic host, and embodies guest-host chemical bonding. First-principles density functional theory calculations suggest strong guest-host interaction beyond the pure ionic bonding, where a large extent of covalency may exist. This study extends the boundary of battery chemistry to large molecular ions as charge carriers and also highlights the electrochemical assembly of a supramolecular system.

25 ENERGY STORAGE↗

Experimental signatures of a three-dimensional quantum spin liquid in effective spin-1/2 Ce 2 Zr 2 O 7 pyrochlore

A quantum spin liquid is a state of matter where unpaired electrons’ spins, although entangled, do not show magnetic order even at the zero temperature. The realization of a quantum spin liquid is a long-sought goal in condensed-matter physics. Although neutron scattering experiments on the two-dimensional spin-1/2 kagome lattice ZnCu 3 (OD) 6 Cl 2 and triangular lattice YbMgGaO 4 have found evidence for the hallmark of a quantum spin liquid at very low temperature (a continuum of magnetic excitations), the presence of magnetic and non-magnetic site chemical disorder complicates the interpretation of the data. Recently, the three-dimensional Ce 3+ pyrochlore lattice Ce 2 Sn 2 O 7 has been suggested as a clean, effective spin-1/2 quantum spin liquid candidate, but evidence of a spin excitation continuum is still missing. Furthermore, we use thermodynamic, muon spin relaxation and neutron scattering experiments on single crystals of Ce 2 Zr 2 O 7 , a compound isostructural to Ce 2 Sn 2 O 7 , to demonstrate the absence of magnetic ordering and the presence of a spin excitation continuum at 35 mK. With no evidence of oxygen deficiency and magnetic/non-magnetic ion disorder seen by neutron diffraction and diffuse scattering measurements, Ce 2 Zr 2 O 7 may be a three-dimensional pyrochlore lattice quantum spin liquid material with minimum magnetic and non-magnetic chemical disorder.

74 ATOMIC AND MOLECULAR PHYSICS↗

Larger increases in more extreme local precipitation events in as climate warms

Global climate models project that extreme precipitation events will increase in intensity during the 21st century at large spatial scales, with several studies suggesting that the most extreme events will exhibit the highest rate of intensification. The identification of the causes of this phenomenon nevertheless remains tenuous, in part because some studies have used methods that may not be appropriate for diagnosing long-term changes in intensity. Using a large ensemble of North American regional climate simulations, we confirm statistical evidence that intensification occurs more rapidly with warming for more extreme events of hourly-to-daily durations at finer regional scales. The larger increases in more extreme events are found to be primarily due to atmospheric circulation changes. Thermodynamically induced changes are found to have relatively uniform effects across extreme events and regions. In contrast, dynamical changes that are reflected in vertical velocity weaken moderate precipitation events over western interior regions of North America, and enhance them elsewhere. The weakening effect decreases and even reverses for more extreme precipitation events, whereas there is further intensification over other parts of North America, creating an “intense gets intenser” pattern over most of the continent.

Li, Chao↗

Numerical Simulation of Residual Stresses in Multipass Gas Metal Arc-Welded Joints of Thick Aluminum Alloy Plates

Numerical simulation was utilized to investigate the residual stresses in the multipass gas metal arc-welded joints of high-strength Al-Zn-Mg alloy plates. In order to elevate the reliability of numerical simulation, the heat source model, parameters characterizing the thermal and mechanical properties, boundary conditions, material constitutive model and finite element meshing were discussed in detail. As a novelty of this paper, the modified Arrhenius constitutive equation of the base material and the filled material was obtained according to the results of high-temperature tensile tests. Distributions of stress on the upper and bottom surface of the joint were obtained based on numerical simulation. Special attention was paid to the evolutions of local residual stress on the bottom surface of the joint, and it’s found that residual stresses on the bottom surface of the joint were almost unchanged after the weld seam approached a certain thickness. Blind-hole method and x-ray method were adopted to detect the residual stresses on the surfaces to verify the accuracy of the results obtained by numerical simulation.

36 MATERIALS SCIENCE↗