Engineering Papers⌕ Search

Engineering topics

Chen, Gang

Publications and source records attributed to Chen, Gang.

At least 271 records · Page 15

Lattice thermal conductivity of Bi, Sb, and Bi-Sb alloy from first principles

Using first principles, we calculate the lattice thermal conductivity of Bi, Sb, and Bi-Sb alloys, which are of great importance for thermoelectric and thermomagnetic cooling applications. Our calculation reveals that the ninth-neighbor harmonic and anharmonic force constants are significant; accordingly, they largely affect the lattice thermal conductivity. Several features of the thermal transport in these materials are studied: (1) the relative contributions from phonons and electrons to the total thermal conductivity as a function of temperature are estimated by comparing the calculated lattice thermal conductivity to the measured total thermal conductivity, (2) the anisotropy of the lattice thermal conductivity is calculated and compared to that of the electronic contribution in Bi, and (3) the phonon mean free path distributions, which are useful for developing nanostructures to reduce the lattice thermal conductivity, are calculated. In conclusion, the phonon mean free paths are found to range from 10 to 100 nm for Bi at 100 K.

36 MATERIALS SCIENCE↗

Thermal conductivity control by oxygen defect concentration modification in reducible oxides: The case of Pr{sub 0.1}Ce{sub 0.9}O{sub 2−δ} thin films

We demonstrate the impact on thermal conductivity of varying the concentration of oxygen vacancies and reduced cations in Pr{sub 0.1}Ce{sub 0.9}O{sub 2−δ} thin films prepared by pulsed laser deposition. The oxygen vacancy concentration is controlled by varying the oxygen partial pressure between 1 × 10{sup −4} and 1 atm at 650 °C. Corresponding changes in the oxygen non-stoichiometry (δ) are monitored by detecting the lattice parameters of the films with high-resolution X-ray diffraction, while the thermal properties are characterized by time-domain thermoreflectance measurements. The films are shown to exhibit a variation in oxygen vacancy content, and in the Pr{sup 3+}/Pr{sup 4+} ratio, corresponding to changes in δ from 0.0027 to 0.0364, leading to a reduction in the thermal conductivity from k = 6.62 ± 0.61 to 3.82 ± 0.51 W/m-K, respectively. These values agree well with those predicted by the Callaway and von Baeyer model for thermal conductivity in the presence of point imperfections. These results demonstrate the capability of controlling thermal conductivity via control of anion and cation defect concentrations in a given reducible oxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of bulk nanostructured lead telluride

Thermal conductivity of lead telluride with embedded nanoinclusions was examined using Monte Carlo simulations with intrinsic phonon transport properties obtained from first-principles-based lattice dynamics. The nanoinclusion/matrix interfaces were set to completely reflect phonons to model the maximum interface-phonon-scattering scenario. The simulations with the geometrical cross section and volume fraction of the nanoinclusions matched to those of the experiment show that the experiment has already reached the theoretical limit of thermal conductivity. The frequency-dependent analysis additionally identifies that the thermal conductivity reduction is dominantly attributed to scattering of low frequency phonons and demonstrates mutual adaptability of nanostructuring and local disordering.

36 MATERIALS SCIENCE↗

Direct and quantitative photothermal absorption spectroscopy of individual particulates

Photonic structures can exhibit significant absorption enhancement when an object's length scale is comparable to or smaller than the wavelength of light. This property has enabled photonic structures to be an integral component in many applications such as solar cells, light emitting diodes, and photothermal therapy. To characterize this enhancement at the single particulate level, conventional methods have consisted of indirect or qualitative approaches which are often limited to certain sample types. To overcome these limitations, we used a bilayer cantilever to directly and quantitatively measure the spectral absorption efficiency of a single silicon microwire in the visible wavelength range. We demonstrate an absorption enhancement on a per unit volume basis compared to a thin film, which shows good agreement with Mie theory calculations. This approach offers a quantitative approach for broadband absorption measurements on a wide range of photonic structures of different geometric and material compositions.

36 MATERIALS SCIENCE↗

The Role of Subtropical Irreversible PV Mixing in the Zonal Mean Circulation Response to Global Warming-like Thermal Forcing

The atmospheric circulation response to the global warming-like tropical upper tropospheric heating is revisited using a dry atmospheric general circulation model (AGCM) in light of a new diagnostics based on the concept of finite-amplitude wave activity (FAWA) on equivalent latitude. For a given tropical heating profile, the linear Wentzel-Kramers-Brillouin (WKB) wave refraction analysis sometimes gives a very different and even opposite prediction of the eddy momentum flux response to that of the actual full model simulation, exposing the limitation of the traditional linear approach in understanding the full dynamics of the atmospheric response under global warming. The implementation of the FAWA diagnostics reveals that in response to the upper tropospheric heating, effective diffusivity, a measure of the mixing efficiency, increases and advances upward and poleward in the subtropics and the resultant enhancement and the poleward encroachment of eddy potential vorticity mixing leads to a poleward displaced potential vorticity (PV) gradient peak in the upper troposphere. The anomalous eddy PV flux, in balance with the PV dissipation, gives rise to a poleward shift in the eddy-driven jet and eddy-driven mean meridional circulation. Sensitivity experiments show that these irreversible dissipation processes in the upper troposphere are robust, regardless of the width of the tropical heating.

54 ENVIRONMENTAL SCIENCES↗

Plasmonic materials for energy: From physics to applications

Physical mechanisms unique to plasmonic materials, which can be exploited for the existing and emerging applications of plasmonics for renewable energy technologies, are reviewed. The hybrid nature of surface plasmon (SP) modes – propagating surface plasmon polaritons (SPPs) and localized surface plasmons (LSPs) – as collective photon–electron oscillations makes them attractive candidates for energy applications. A high density of optical states in the vicinity of plasmonic structures enhances light absorption and emission, enables localized heating, and drives near-field heat exchange between hot and cold surfaces. SP modes channel the energy of absorbed photons directly to the free electrons, and the generated hot electrons can be utilized in thermoelectric, photovoltaic and photo-catalytic platforms. The advantages and disadvantages of using plasmonics over conventional technologies for solar energy and waste heat harvesting are discussed, and areas where plasmonics is expected to lead to performance improvements not achievable by other methods are identified.

36 MATERIALS SCIENCE↗

Metal deposition using seed layers

Methods of forming a conductive metal layers on substrates are disclosed which employ a seed layer to enhance bonding, especially to smooth, low-roughness or hydrophobic substrates. In one aspect of the invention, the seed layer can be formed by applying nanoparticles onto a surface of the substrate; and the metallization is achieved by electroplating an electrically conducting metal onto the seed layer, whereby the nanoparticles serve as nucleation sites for metal deposition. In another approach, the seed layer can be formed by a self-assembling linker material, such as a sulfur-containing silane material.

36 MATERIALS SCIENCE↗

Exceeding the solar cell Shockley–Queisser limit via thermal up-conversion of low-energy photons

Maximum efficiency of ideal single-junction photovoltaic (PV) cells is limited to 33% (for 1 sun illumination) by intrinsic losses such as band edge thermalization, radiative recombination, and inability to absorb below-bandgap photons. This intrinsic thermodynamic limit, named after Shockley and Queisser (S–Q), can be exceeded by utilizing low-energy photons either via their electronic up-conversion or via the thermophotovoltaic (TPV) conversion process. However, electronic up-conversion systems have extremely low efficiencies, and practical temperature considerations limit the operation of TPV converters to the narrow-gap PV cells. We develop a conceptual design of a hybrid TPV platform, which exploits thermal up-conversion of low-energy photons and is compatible with conventional silicon PV cells by using spectral and directional selectivity of the up-converter. The hybrid platform offers sunlight-to-electricity conversion efficiency exceeding that imposed by the S–Q limit on the corresponding PV cells across a broad range of bandgap energies, under low optical concentration (1–300 suns), operating temperatures in the range 900–1700 K, and in simple flat panel designs. We demonstrate maximum conversion efficiency of 73% under illumination by non-concentrated sunlight. A detailed analysis of non-ideal hybrid platforms that allows for up to 15% of absorption/re-emission losses yields limiting efficiency value of 45% for Si PV cells.

14 SOLAR ENERGY↗

Synthesis of CuO by Cu-CPPs with the determination of Cu(II) coordination modes from a novel complex of [Cu(terpyOH){sub 2}]·(HBTC)·2H{sub 2}O

In this study, we investigated the synthesis of CuO microrods by simple calcination of copper-based coordination polymer particles (Cu-CPPs) at high temperature in air. The photocatalytic activity of the CuO microrods was tested by the decomposition of aqueous solution of RhB, which was completely decomposed by irradiation with light. To analyze the relationship of metal ions and ligands in the Cu-CPPs, the single crystal of [Cu(terpyOH){sub 2}]∙(HBTC)∙2H{sub 2}O (1) (terpyOH=4′-hydroxy-2,2′:6′,2″-terpyridine, BTC=1,3,5-benzene tricarboxylate) was first prepared and characterized by X-ray single crystal structural analysis. A variety of hydrogen bonds constructing the 3D complex structure in [Cu(terpyOH){sub 2}]∙(HBTC)∙2H{sub 2}O (1) were observed. - Graphical abstract: Demonstrating a general method to synthesize CuO microrods via simple calcination of Cu-CPPs and Cu(II) coordination modes from a novel complex of [Cu(terpyOH){sub 2}]∙(HBTC)·2H{sub 2}O constructed by hydrogen bonding. Display Omitted - Highlights: • The formation of microrods CuO from thermal treatment of Cu-CPPs through an “escape-by-crafty-scheme” strategy has been studied. • Determination of Cu(II) coordination modes in Cu-CPPs from a novel complex of [Cu(terpyOH){sub 2}]∙(HBTC) 2H{sub 2}O. • Invested the behave of hydrogen bonding to construct the 3D complex structure. • Commendable photodegradation performance was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Apigenin suppresses migration and invasion of transformed cells through down-regulation of C-X-C chemokine receptor 4 expression

Environmental exposure to arsenic is known to cause various cancers. There are some potential relationships between cell malignant transformation and C-X-C chemokine receptor type 4 (CXCR4) expressions. Metastasis, one of the major characteristics of malignantly transformed cells, contributes to the high mortality of cells. CXCR4 and its natural chemokine ligand C-X-C motif ligand 12 (CXCL12) play a critical role in metastasis. Therefore, identification of nutritional factors which are able to inhibit CXCR4 is important for protection from environmental arsenic-induced carcinogenesis and for abolishing metastasis of malignantly transformed cells. The present study demonstrates that apigenin (4′,5,7-trihydroxyflavone), a natural dietary flavonoid, suppressed CXCR4 expression in arsenic-transformed Beas-2B cells (B-AsT) and several other types of transformed/cancer cells in a dose- and time-dependent manner. Neither proteasome nor lysosome inhibitor had any effect in reducing the apigenin-induced down-regulation of CXCR4, indicating that apigenin-induced down-regulation of CXCR4 is not due to proteolytic degradation. The down-regulation of CXCR4 is mainly due to the inhibition of nuclear factor κB (NF-κB) transcriptional activity. Apigenin also abolished migration and invasion of transformed cells induced by CXCL12. In a xenograft mouse model, apigenin down-regulated CXCR4 expression and suppressed tumor growth. Taken together, our results show that apigenin is a novel inhibitor of CXCR4 expression. This dietary flavonoid has the potential to suppress migration and invasion of transformed cells and prevent environmental arsenic-induced carcinogenesis. - Highlights: • Apigenin has a potential in preventing environmental arsenic induced carcinogenesis. • Apigenin suppresses CXCR4 in malignant transformed cells in vitro and in vivo. • The down-regulation of CXCR4 is mainly due to inhibition of NF-κB activity.

60 APPLIED LIFE SCIENCES↗

Understanding of the contact of nanostructured thermoelectric n-type Bi 2 Te 2.7 Se 0.3 legs for power generation applications

Traditional processes of making contacts (metallization layer) onto bulk crystalline Bi 2 Te 3 -based materials do not work for nanostructured thermoelectric materials either because of weak bonding strength or an unstable contact interface at temperatures higher than 200 °C. Hot pressing of nickel contact onto nanostructured thermoelectric legs in a one-step process leads to strong bonding. However, such a process results in large contact resistance in n-type Ni/Bi 2 Te 2.7 Se 0.3 /Ni legs, although not in p-type Ni/Bi 0.4 Sb 1.6 Te 3 /Ni legs. A systematic study was carried out here to investigate the detailed reaction and diffusion at the interface of the nickel layer and n-type Bi 2 Te 3 -based thermoelectric material layer. We found that a p-type region formed within the n-type Bi 2 Te 2.7 Se 0.3 during hot pressing due to Te deficiency and Ni doping, leading to a large contact resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and supercapacitor application of the single crystal nickel hydroxide and oxide nanosheets

Graphical abstract: The nickel hydroxide and nickel oxide nanosheets prepared using CTAB at room temperature exhibit a high specific capacitance, prompt charge/discharge rate. - Highlights: • The nickel hydroxide nanosheets were prepared using CTAB at room temperature. • Ni(OH){sub 2} nanosheet can be successfully converted to NiO nanosheet via calcination. • The NiO nanosheet has a specific capacitance of 388 F g{sup −1} at 5 A g{sup −1} in KOH solution. • Anneal temperature impacts capacitive properties as electrode. - Abstract: The single crystalline Ni(OH){sub 2} nanosheets were synthesized by a simple chemical precipitation method using nickel chloride as precursors and ammonia as precipitating agent. The Ni(OH){sub 2} nanosheets were successfully converted to NiO nanosheets via calcination under appropriate conditions. Analytical methods such as X-ray diffraction (XRD) spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and Fourier transformed infrared (FTIR) spectra were employed to characterize the morphology and microstructure of the final products. The experimental results revealed that Ni(OH){sub 2} nanosheets were shape-preserved transformed to NiO nanosheets at 250 °C for 24 h. Ni(OH){sub 2} and NiO nanosheets were directly functionalized as supercapacitor electrodes for potential energy storage applications, whose charge–discharge properties, electrochemical impedance spectra, cyclic voltammetry, and cycle performance were examined. The experimental results show that the single-crystalline NiO nanosheets are a promising candidate for the supercapacitor electrode. They exhibit a high specific capacitance, prompt charge/discharge rate.

36 MATERIALS SCIENCE↗

High thermoelectric performance by resonant dopant indium in nanostructured SnTe

From an environmental perspective, lead-free SnTe would be preferable for solid-state waste heat recovery if its thermoelectric figure-of-merit could be brought close to that of the lead-containing chalcogenides. We studied the thermoelectric properties of nanostructured SnTe with different dopants, and found indium-doped SnTe showed extraordinarily large Seebeck coefficients that cannot be explained properly by the conventional two-valence band model. We attributed this enhancement of Seebeck coefficients to resonant levels created by the indium impurities inside the valence band, supported by the first-principles simulations. This, together with the lower thermal conductivity resulting from the decreased grain size by ball milling and hot pressing, improved both the peak and average nondimensional figure-of-merit (ZT) significantly. A peak ZT of ~1.1 was obtained in 0.25 atom % In-doped SnTe at about 873 K.

30 DIRECT ENERGY CONVERSION↗