Engineering Papers⌕ Search

Engineering topics

Chen, Fanglin

Publications and source records attributed to Chen, Fanglin.

At least 37 records · Page 2

LaCoO 3-δ coated Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ cathode for intermediate temperature solid oxide fuel cells

Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ (BSCF) is a promising cathode for intermediate temperature solid oxide fuel cells. Yet, BSCF cathode performance stability has been a challenge and its electrochemical performance deteriorates severely in the presence of Cr2O3-forming metallic interconnect. We demonstrate that LaCoO 3-δ (LC) coating on BSCF cathode can not only enhance BSCF electrochemical performance, but also effectively improve the BSCF performance stability. Here, LC-coated BSCF-Gd 0.1 Ce 0.9 O 1.9 (LC@BSCF-GDC) cathode is prepared through a solution impregnation method and systematically characterized. EIS, XRD, Raman, SEM and EDS tests with and without SUS430 interconnect are conducted to characterize the Cr-tolerance. The results reflect that BSCF-GDC cathode is susceptible to Cr poisoning while LC@BSCF-GDC cathode has significantly enhanced tolerance to Cr poisoning. Single cells with LC@BSCF-GDC cathode achieve higher peak power density and smaller polarization resistance values than that of single cells with BSCF-GDC cathode. Furthermore, significant improvement of performance stability under a constant current load has been achieved for single cells with LC@BSCF-GDC cathode. This work provides a new solution for solving BSCF cathode performance stability.

25 ENERGY STORAGE↗

High-throughput, super-resolution 3D reconstruction of nano-structured solid oxide fuel cell electrodes and quantification of microstructure-property relationships

Nano-structuring methods are actively applied to solid oxide fuel cell electrodes to reduce the operating temperature while preserving a high electro-catalytic activity. The unique nanoscale microstructure is vital to electrochemical performance, yet not well quantified in three dimensions. Here, with a multi-stage recovering principle of distance correlation functions, the three-dimensional microstructures of La 0.8 Sr 0.2 MnO 3-δ nanoparticles infiltrated porous Y 0.16 Zr 0.84 O 2-δ electrodes are reconstructed with a dimension of 1024 × 1024 × 1024 voxels at a resolution of 7.5 nm from one two-dimensional micrograph. The key geometric characteristics, such as tortuosity factors, active surface/interface areas and three-phase boundary length, are calculated from the reconstructed three-dimensional microstructures at various loadings of La 0.8 Sr 0.2 MnO 3-δ . Combining with the analysis of distribution of relaxation times, the active three-phase boundary length is shown to be the main factor governing the electrode impedance, and is related quantitatively to the electrochemical process at high frequency. The accuracy of capturing nanoscale features is validated by the focused ion beam sectioning dataset of a Ni-Y 0.16 Zr 0.84 O 2-δ electrode at nanoscale resolution. Lastly, this work provides a promising strategy for reconstructing three-dimensional heterogeneous nanostructures from one super-resolution two-dimensional micrograph, and demonstrates a quantitative approach for uncovering processing-structure-property relationships of nanostructured electrodes and beyond.

25 ENERGY STORAGE↗

High-throughput 3D reconstruction of stochastic heterogeneous microstructures in energy storage materials

Abstract Stochastic heterogeneous microstructures are widely applied in structural and functional materials, playing a crucial role in determining their performance. X-ray tomography and focused ion beam serial sectioning are frequently used methods to reconstruct three-dimensional (3D) microstructures, yet are demanding techniques and are resolution-limited. Here, a high-throughput multi-stage 3D reconstruction method via distance correlation functions is developed using a single representatively large-sized 2D micrograph for stochastic microstructures, and verified by X-ray micro-tomography datasets of isotropic and anisotropic solid oxide fuel cell electrodes. This method provides an economic, easy-to-use and high-throughput approach for reconstructing stochastic heterogeneous microstructures for energy conversion and storage devices, and can readily be extended to other materials.

36 MATERIALS SCIENCE↗

Mathematical modeling of a proton-conducting solid oxide fuel cell with current leakage

Here, a framework of charge transports in proton-conducting solid oxide fuel cells (H-SOFCs) with considering current leakage is developed by assuming four electrode reactions. Current leakage happens when electron holes pass through the electrolyte and combine with electrons at the anode side. An analytical solution of leakage currents is proposed depending on the Nernst-Planck equation. On the basis of the analysis expression, a mathematical model of H-SOFCs is proposed, which can provide the information about current-voltage characteristics, leakage current density, Faraday and energy efficiencies. Moreover, H-SOFCs with the BaZr 0.8 Y 0.2 O 3 electrolyte are fabricated and tested, and the proposed model well reproduces the experimental data. The simulation results indicate that current leakage primarily affects the H-SOFC performance when the output voltage is close to the OCV. Both Faraday efficiencies and energy efficiencies decrease with increasing operating temperatures due to the existence of current leakage.

25 ENERGY STORAGE↗

Thermodynamic and experimental assessment of proton conducting solid oxide fuel cells with internal methane steam reforming

Operating proton conducting solid oxide fuel cells (H-SOFCs) with hydrocarbon as fuel remains a challenge because of the instability of the anode and electrolyte materials in a CO 2 /H 2 O-containing atmosphere and the catalytic activity and coking resistance of the anode for direct oxidation of hydrocarbons. Therefore, in this paper, the steam reforming of methane (SRM, an endothermic process) is integrated into the H-SOFCs (fuel cell process, an exothermic process) for internally converting hydrocarbon to hydrogen and increasing energy efficiency of H-SOFCs. Moreover, a proton-conducting zirconate oxide (BaZr 0.8 Y 0.2 O 3 , BZY), which is stable in a CO 2 /H 2 O-containing atmosphere, is applied as an electrolyte and anode material of H-SOFCs. The operation of BZY-based H-SOFCs with internal SRM is assessed by thermodynamic calculation and experiments for the first time. The catalytic activity and coking resistance of the Ni-BZY anode for SRM are investigated thermodynamically and experimentally. Finally, the results demonstrate that the Ni-BZY anode possesses reasonable catalytic activity as well as good coking resistance for SRM at a temperature as low as 550 °C. Then, the electrochemical performance and durability of H-SOFCs operated with internal SRM are comprehensively studied from 550 °C to 700 °C.

25 ENERGY STORAGE↗

A highly active hybrid catalyst modified (La 0.60 Sr 0.40 ) 0.95 Co 0.20 Fe 0.80 O 3-δ cathode for proton conducting solid oxide fuel cells

The sluggish reaction kinetics in the cathode usually leads to considerable cathode polarization resistance, hindering the development of proton conducting solid oxide fuel cells (H-SOFCs) operated at intermediate temperatures (400–650 °C). In this paper, to address this problem, for the first time, a novel hybrid catalyst consisting of PrNi 0.5 Mn 0.5 O 3 and PrOx is impregnated in the (La 0.60 Sr 0.40 ) 0.95 Co 0.20 Fe 0.80 O 3-δ (LSCF) cathode of H-SOFCs, resulting in significant enhancement of the cathode reaction kinetics. Single cells with impregnated LSCF cathode and BaZr 0.8 Y 0.2 O 3 (BZY) electrolyte yield a maximum power density (MPD) of 0.198 W cm -2 at 600 °C, more than doubled of that with blank LSCF cathode (0.083 W cm -2 ). ECR and EIS studies reveal that the hybrid catalyst can substantially accelerate the oxygen-ion transfer and oxygen dissociation-absorption processes in the cathode, resulting in significantly lower polarization resistance and higher MPD. In addition, the hybrid catalyst possesses good chemical and microstructural stability at 600 °C. Consequently, the single cells with impregnated LSCF cathode show excellent durability. Finally, this study shows that the impregnation of this novel hybrid catalyst in the cathode could be a promising approach to improve the performance and stability of H-SOFCs.

36 MATERIALS SCIENCE↗

Mixed ionic and electronic conductor based on Sr2Fe2-xMoxO6 perovskite

In accordance with the present disclosure, a method for fabricating a symmetrical solid oxide fuel cell is described. The method includes synthesizing a composition comprising perovskite and applying the composition on an electrolyte support to form both an anode and a cathode.

36 MATERIALS SCIENCE↗

Chemically stable ceramic-metal composite membrane for hydrogen separation

A hydrogen permeation membrane is provided that can include a metal and a ceramic material mixed together. The metal can be Ni, Zr, Nb, Ta, Y, Pd, Fe, Cr, Co, V, or combinations thereof, and the ceramic material can have the formula: BaZr.sub.1-x-yY.sub.xT.sub.yO.sub.3-.delta. where 0.ltoreq.x.ltoreq.0.5, 0.ltoreq.y.ltoreq.0.5, (x+y)>0; 0.ltoreq..delta..ltoreq.0.5, and T is Sc, Ti, Nb, Ta, Mo, Mn, Fe, Co, Ni, Cu, Zn, Ga, In, Sn, or combinations thereof. A method of forming such a membrane is also provided. A method is also provided for extracting hydrogen from a feed stream.

08 HYDROGEN↗

Partial oxidation of methane (POM) assisted solid oxide co-electrolysis

Methods for simultaneous syngas generation by opposite sides of a solid oxide co-electrolysis cell are provided. The method can comprise exposing a cathode side of the solid oxide co-electrolysis cell to a cathode-side feed stream; supplying electricity to the solid oxide co-electrolysis cell such that the cathode side produces a product stream comprising hydrogen gas and carbon monoxide gas while supplying oxygen ions to an anode side of the solid oxide co-electrolysis cell; and exposing the anode side of the solid oxide co-electrolysis cell to an anode-side feed stream. The cathode-side feed stream comprises water and carbon dioxide, and the anode-side feed stream comprises methane gas such that the methane gas reacts with the oxygen ions to produce hydrogen and carbon monoxide. The cathode-side feed stream can further comprise nitrogen, hydrogen, or a mixture thereof.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ni modified ceramic anodes for direct-methane solid oxide fuel cells

In accordance with certain embodiments of the present disclosure, a method for fabricating a solid oxide fuel cell is described. The method includes synthesizing a composition having a perovskite present therein. The method further includes applying the composition on an electrolyte support to form an anode and applying Ni to the composition on the anode.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Two-Step Reactive Aid Sintering of BaZr 0.8 Y 0.2 O 3-δ Proton-Conducting Ceramics

Ceramic-based proton conductors enable high-temperature hydrogen economy applications such as hydrogen separation membranes, fuel cells, and steam electrolyzers. BaZr 0.8 Y 0.2 O 3-δ (BZY) proton-conducting oxide possesses the highest level of proton conductivity reported to date, but poor sinterability hinders its widespread utilization. Here, we report a two-step reactive aid sintering (TRAS) method involving the introduction of BaCO 3 and B 2 O 3 -Li 2 O for the preparation of dense BZY ceramics sintered at 1500°C. The resulting BZY samples showed a pure perovskite structure with a dramatic increase in the relative density to 91.5%. In addition, the shrinkage during sintering was improved to 19.3% by a TRAS method as compared to 2.6% by the conventional solid date reaction method. Moreover, the bulk conductivity was improved due to enhanced densification, while the grain boundary conductivity decreased due to the blocking behavior of the sintering aid resulting in a decrease in the total conductivity of the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrode Design for Low Temperature Direct-Hydrocarbon Solid Oxide Fuel Cells

In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.

Chen, Fanglin↗

Electrode design for low temperature direct-hydrocarbon solid oxide fuel cells

In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.

30 DIRECT ENERGY CONVERSION↗