Engineering Papers⌕ Search

Engineering topics

Chen, Elton Y.

Publications and source records attributed to Chen, Elton Y..

The heterogeneous nature of mechanically accelerated grain growth

Abstract While grain growth is traditionally viewed as a purely thermally driven process, nanocrystalline metals can undergo grain growth under mechanical loads, even at room temperature. We performed a detailed atomistic study of the heterogeneous nature of mechanically accelerated grain growth in a polycrystalline Pt nanowire. Using molecular dynamics simulations, we compared the grain-growth behavior of individual grains during tensile and shear cyclic loading, for three different equivalent strain levels, and at two temperatures. Pure thermal grain growth with no mechanical loading provided a baseline reference case. On average, grains that were already susceptible to thermal grain growth were stimulated to grow faster with mechanical loading, as expected. However, when analyzed on a grain-by-grain basis, the results were far more complex: grains that grew fastest under one stimuli were less accelerated under other stimuli. Even when the magnitude of loading changed, the relative growth of individual grains was distorted. We interpret this complexity from the perspective of superimposed growth mechanisms.

Chen, Elton Y.↗

Irradiation-induced grain boundary facet motion: In situ observations and atomic-scale mechanisms

Metals subjected to irradiation environments undergo microstructural evolution and concomitant degradation, yet the nanoscale mechanisms for such evolution remain elusive. Here, we combine in situ heavy ion irradiation, atomic resolution microscopy, and atomistic simulation to elucidate how radiation damage and interfacial defects interplay to control grain boundary (GB) motion. While classical notions of boundary evolution under irradiation rest on simple ideas of curvature-driven motion, the reality is far more complex. Focusing on an ion-irradiated Pt Σ3 GB, we show how this boundary evolves by the motion of 120° facet junctions separating nanoscale {112} facets. Our analysis considers the short- and mid-range ion interactions, which roughen the facets and induce local motion, and longer-range interactions associated with interfacial disconnections, which accommodate the intergranular misorientation. We suggest how climb of these disconnections could drive coordinated facet junction motion. These findings emphasize that both local and longer-range, collective interactions are important to understanding irradiation-induced interfacial evolution.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atomistic modeling of radiation damage in crystalline materials

This review discusses atomistic modeling techniques used to simulate radiation damage in crystalline materials. Radiation damage due to energetic particles results in the formation of defects. The subsequent evolution of these defects over multiple length and time scales requiring numerous simulations techniques to model the gamut of behaviors. This work focuses attention on current and new methodologies at the atomistic scale regarding the mechanisms of defect formation at the primary damage state.

36 MATERIALS SCIENCE↗

Origins of the change in mechanical strength of silicon/gold nanocomposites during irradiation

Abstract Silicon-based layered nanocomposites, comprised of covalent-metal interfaces, have demonstrated elevated resistance to radiation. The amorphization of the crystalline silicon sublayer during irradiation and/or heating can provide an additional mechanism for accommodating irradiation-induced defects. In this study, we investigated the mechanical strength of irradiated Si-based nanocomposites using atomistic modeling. We first examined dose effects on the defect evolution mechanisms near silicon-gold crystalline and amorphous interfaces. Our simulations reveal the growth of an emergent amorphous interfacial layer with increasing dose, a dominant factor mitigating radiation damage. We then examined the effect of radiation on the mechanical strength of silicon-gold multilayers by constructing yield surfaces. These results demonstrate a rapid onset strength loss with dose. Nearly identical behavior is observed in bulk gold, a phenomenon that can be rooted to the formation of radiation-induced stacking fault tetrahedra which dominate the dislocation emission mechanism during mechanical loading. Taken together, these results advance our understanding of the interaction between radiation-induced point defects and metal-covalent interfaces.

36 MATERIALS SCIENCE↗

Multi-Resolution Characterization of the Coupling Effects of Molten Salts, High Temperature and Irradiation on Intergranular Fracture

This project focused on providing a fundamental physico-chemical understanding of the coupling mechanisms of corrosion- and radiation-induced degradation at material-salt interfaces in Ni-based alloys operating in emulated Molten Salt Reactor(MSR) environments through the use of a unique suite of aging experiments, in-situ nanoscale characterization experiments on these materials, and multi-physics computational models. The technical basis and capabilities described in this report bring us a step closer to accelerate the deployment of MSRs by closing knowledge gaps related to materials degradation in harsh environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Decoding defect statistics from diffractograms via machine learning

Abstract Diffraction techniques can powerfully and nondestructively probe materials while maintaining high resolution in both space and time. Unfortunately, these characterizations have been limited and sometimes even erroneous due to the difficulty of decoding the desired material information from features of the diffractograms. Currently, these features are identified non-comprehensively via human intuition, so the resulting models can only predict a subset of the available structural information. In the present work we show (i) how to compute machine-identified features that fully summarize a diffractogram and (ii) how to employ machine learning to reliably connect these features to an expanded set of structural statistics. To exemplify this framework, we assessed virtual electron diffractograms generated from atomistic simulations of irradiated copper. When based on machine-identified features rather than human-identified features, our machine-learning model not only predicted one-point statistics (i.e. density) but also a two-point statistic (i.e. spatial distribution) of the defect population. Hence, this work demonstrates that machine-learning models that input machine-identified features significantly advance the state of the art for accurately and robustly decoding diffractograms.

36 MATERIALS SCIENCE↗

Temperature and radiation effects on brittle versus ductile fracture behavior in miscible phase boundaries: insight from atomistic simulations

Temperature- and irradiation-assisted failure mechanisms in miscible phase boundaries are clarified via atomistic calculations. We first establish the temperature-dependent brittle-to-ductile transition in U–Zr miscible phase boundaries. Our results confirm that these boundaries are mostly brittle at low temperatures and ductile at elevated temperatures. We then investigate the changes induced by irradiation on the fracture mechanisms in such phase boundaries. The irradiation-induced defect accumulation follows a multi-stage process that starts with the accumulation of isolated small dislocation loops before transitioning to the saturation and growth of larger dislocation loops and end up with a reorganization into forest dislocations. The accumulation of loops is the primary feature to participate in the delineation between brittle and ductile interfacial fracture in irradiated phase boundaries. At low damage levels, radiation defect interactions with the crack tip are limited and U–Zr miscible boundaries fail through the emission of dislocations ahead of the crack tip followed by brittle cleavage in agreement with the classical Griffith’s criterion for crack stability. At higher damage levels, the failure mode transitions from brittle crack growth to ductile void growth. In this case, the microcrack tip is blunted by the high density of pre-existing, radiation-induced defects in the vicinity of the crack. This interaction leads to the development and growth of a cavity at the interface as opposed to interfacial cleavage.

36 MATERIALS SCIENCE↗

Benchmark problems for the Mesoscale Multiphysics Phase Field Simulator (MEMPHIS)

This report details the current benchmark results to verify, validate and demonstrate the capabilities of the in-house multi-physics phase-field modeling framework Mesoscale Multiphysics Phase Field Simulator (MEMPHIS) developed at the Center for Integrated Nanotechnologies (CINT). MEMPHIS is a general phase-field capability to model various nanoscience and materials science phenomena related to microstructure evolution. MEMPHIS has been benchmarked against a suite of reported classical phase-field benchmark problems to verify and validate the correctness, accuracy and precision of the models and numerical methods currently implemented into the code.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reduced-order atomistic cascade method for simulating radiation damage in metals

Atomistic modeling of radiation damage through displacement cascades is deceptively non-trivial. Because of the high energy and stochastic nature of atomic collisions, individual primary knock-on atom (PKA) cascade simulations are computationally expensive and ill-suited for length and dose upscaling. Here, we propose a reduced-order atomistic cascade model capable of predicting and replicating radiation events in metals across a wide range of recoil energies. Our methodology approximates cascade and displacement damage production by modeling the cascade as a core-shell atomic structure composed of two damage production estimators, namely an athermal recombination corrected displacements per atom (arc-dpa) in the shell and a replacements per atom (rpa) representing atomic mixing in the core. These estimators are calibrated from explicit PKA simulations and a standard displacement damage model that incorporates cascade defect production efficiency and mixing effects. We highlight the predictability and accuracy of our reduced-order atomistic cascade method for the cases of copper and niobium by comparing its results with those from full PKA simulations in terms of defect production as well as the resulting cascade evolution and structure. We offer examples for simulating high energy cascade fragmentation and large dose ion-bombardment to demonstrate its possible applicability. Finally, we discuss the various practical considerations and challenges associated with this methodology especially when simulating subcascade formation and dose effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation resistance of nanostructured interfaces in Zr–Nb metallic multilayers

We report that irradiation resistance of metallic nanostructured multilayers is determined by the interactions between defects and phase boundaries. However, the dose-dependent interfacial morphology evolution can greatly change the nature of the defect–boundary interaction mechanisms over time. In the present study, we used atomistic models combined with a novel technique based on the accumulation of Frenkel pairs to simulate irradiation processes. We examined dose effects on defect evolutions near zirconium–niobium multilayer phase boundaries. Our simulations enabled us to categorize defect evolution mechanisms in bulk phases into progressing stages of dislocation accumulation, saturation, and coalescence. In the metallic multilayers, we observed a phase boundary absorption mechanism early on during irradiation, while at higher damage levels, the increased irradiation intermixing triggered a phase transformation in the Zr–Nb mixture. Lastly, this physical phenomenon resulted in the emission of a large quantity of small immobile dislocation loops from the phase boundaries.

36 MATERIALS SCIENCE↗

Atomistic simulations of temperature and direction dependent threshold displacement energies in α - and γ -uranium

We performed a systematic study of the threshold displacement energy (E d ) in metallic uranium as a function of both the recoil direction and temperature using Molecular Dynamics simulations. We developed a novel orientation sampling scheme that utilizes crystallographic symmetrical geodesic grids to select directions from the orientation fundamental zone to study the directional dependency. Additionally, we studied the temperature dependency by considering both the α-uranium phase, corresponding to the ground state for temperatures ranging from 0 K to 600 K, and the γ-uranium phase, corresponding to high-temperature state for temperatures above 900 K. In this study, we compared several definitions of the threshold energy: a direction-specific threshold displacement energy (E d (θ,Φ)), an angle-averaged threshold energy ($E_d^{ave}$), a production probability threshold displacement energy ($E_d^{pp}$), and a defect count threshold displacement energy ($E_d^{dc}$). The direction-specific threshold displacement energies showed large angular anisotropy and variations in E d results in accordance with crystallographic considerations. Specifically, preferred defect channeling directions were observed in the [120], [1$\bar{2}$0], [1$\bar{1}$1] directions for the α-uranium, and [001], [111] directions for the γ-uranium. The production probability threshold displacement energy ($E_d^{pp}$) is calculated as approximately 99.2659 eV at 10 K (α-U), 103.4980 eV at 300 K (α-U), 76.0915 eV at 600 K (α-U), and 42.9929 eV at 900 K (γ-U). With exception of those calculated at 10 K, threshold displacement energies decrease with increasing temperature. Analyses of the stable defect structures showed that the most commonly observed interstitial configuration in α-uranium consists of a ( 0 1 0 ) dumbbell-like interstitial; while in γ-uranium no preferential defect configuration could be identified due to thermally-induced lattice instabilities at the elevated temperatures.

36 MATERIALS SCIENCE↗

Misfit dislocation networks in semi-coherent miscible phase boundaries: An example for U–Zr interfaces

Semi-coherent cube-on-cube miscible U–Zr interfaces were studied using molecular dynamics simulations. The misfit accommodation of such semi-coherent phase boundaries was characterized by a two-dimensional dislocation network model utilizing a combination of theoretical predictions and analysis of the atomic system. The dislocation networks were discussed for various stacking orientation of the adjoining phases in terms of the composition of the dislocation sets, the partitioning between edge and screw components and the associated residual elastic fields. Furthermore, these analyses showed that the patterning of the network of dislocations forming these phase boundaries results from the competition between a structurally-driven process (i.e., function of the lattice misfit) and a chemically-driven process (i.e., due to the miscibility between U and Zr).

36 MATERIALS SCIENCE↗