Engineering Papers⌕ Search

Engineering topics

Charles Trepte

Publications and source records attributed to Charles Trepte.

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Tropical Three-dimensional Cloud Climatology during El Niño Events with CALIPSO Level-3 Cloud Products

A previous case study showed opposite cloud anomalies at high, middle and low altitude regions during a weak 2006/2007 El Niño and a moderate 2009/2010 El Niño. In this work, we use CALIPSO Level 3 (L3) Cloud Products to provide a comprehensive picture of cloud anomalies during all recent five El Niño events since 2006, with a particular focus on thin cirrus clouds at high altitudes, which are challenging for passive sensor detection algorithms. Specifically, the vertical cloud anomalies are calculated with the L3 Cloud Occurrence Product, the horizontal cloud anomalies are from the L3 GEWEX product, and the ice cloud extinction profiles and ice water content are obtained from the L3 Ice Cloud product. The cloud anomalies are further analyzed with the magnitude and pattern of sea surface temperature (SST) anomalies. These findings will improve current knowledge of ENSO from a new perspective.

El Nino↗
NASA NTRS2023

Cloud - Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management System: Data Products Catalog V4.95

The CALIPSO V4.51 Lidar Level 1 and Level 2 data product is an updated version of an already order-able dataset. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - August 2023). The attached Data Products Catalog (v4.95) describes the content of these new data products.

Mark Vaughan↗
NASA NTRS2022

Mitigation Strategies for the Impact of Low Energy Laser Pulses in CALIOP Calibration and Level 2 Retrievals

Since mid-2016, the frequency of low energy laser pulses emitted by the CALIPSO lidar has been slowly increasing due to pressure losses in the canister housing the laser. While originally confined primarily to the South Atlantic Anomaly (SAA) region, these low energy pulses now occur intermittently around the globe. Low energy pulses can cause calibration biases and degrade the science quality of level 2 retrievals. We describe a new low energy mitigation (LEM) algorithm that will be implemented incrementally in future versions of the CALIOP data processing to identify and reject affected profiles during calibration and feature detection. The LEM algorithm effectively eliminates low energy calibration biases, improves level 2 retrievals, and minimizes level 2 data loss.

Jason Tackett↗
NASA NTRS2022

Cloud Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management - Data Products Catalog V4.94

The CALIPSO V2.00 Lidar Level 2 Polar Stratospheric Cloud data product is an updated version of an already order-able dat set. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - March 2021). The attached Data Products Catalog (v4.94) describes this new product in section 2.14, pp 115- 119.

Mark Vaughan↗
NASA NTRS2018

TPSAS-NF1676L-32014-DND

The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), on-board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) is a satellite-borne polarization sensitive lidar. It has been providing the vertical distributions of clouds and aerosols along with their microphysical and optical properties since 2006. One of its important Level 2 products, feature classification, has been determined using the lidar information from 532 nm parallel and perpendicular channels, and 1064 nm channel measurements of layer integrated backscatter. Deep machine learning methods which combine both the channel and texture information to recognize feature patterns is uniquely beneficial when applied to this data. In this study, we will use Convolutional Neural Network (CNN), a deep machine learning method, to classify lidar aerosol subtypes by using the lidar profile observations. This method uses additional information from the vertical texture of the feature instead of using only the layer information. Note that in the integrated layer properties, the texture information has been masked due to averaging. Our results will show how the texture information plays a role in the classification. This preliminary work explores the benefits and potential of deep machine learning methods for lidar retrievals and focuses on the aerosol subtype classification. The broader application extends to the classification of other feature types. Future applications include the developing deep machine learning methods with neural networks to retrieve properties of the features, and studies of indirect effect of cloud-aerosol interaction from lidar measurements.

Shan Zeng Kowalski↗
NASA NTRSDate not supplied

TPSAS-NF1676L-17926-DND

Validation of the CALIOP data products remains an ongoing task for the CALIPSO team. Validating the optical properties of aerosols located above clouds is especially difficult, because independent measurements are usually not available. In this presentation we analyze 532-nm aerosol optical depth (AOD) above clouds, comparing results from the standard CALIOP algorithm with two alternate algorithms applied to CALIOP data acquired along the transport pathways of African dust and biomass burning aerosols. Multiple years of the CALIPSO nighttime data (2007-2012) were examined. The analysis was limited to cases where there are opaque water clouds below aerosol layers that can be used as a reference to retrieve AOD of the overlying aerosol layer.

Zhaoyan Liu↗
NASA NTRSDate not supplied

TPSAS-NF1676L-23557-DND

The Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) measures both parallel and perpendicular backscatter of linearly polarized 532 nm light from cloud particles in the atmosphere. The perpendicular component of the return signal allows differentiation between cloud layers consisting of spherical water droplets from those with non-spherical ice particles. A two-way distribution of layer-integrated 532 nm total backscatter and the layer-integrated 532 nm depolarization ratio further differentiates between water cloud layers with significant multiple scattering, horizontally-oriented ice particles that cause specular reflections, and randomly-oriented ice particles, as described in Hu et al., 2009. The cloud phase algorithm functions well for the majority of clouds, but there have been some recent changes and improvements that are described in this poster. The impact of the CALIOP viewing angle change from near-nadir (0.3 degrees) to slightly tilted (3.0 degrees) on the optical properties of the various CALIOP cloud particle phases is also shown. A major improvement to the phase algorithm is the limitation of a spatial coherence test for horizontally-oriented ice to cloud layers that have sufficient integrated attenuated backscatter to likely contain HOI. This change reduces a "striping" effect caused by noisiness in the spatial coherence test for thin cloud layers. Additional temperature tests are considered, and the regional and vertical distribution of cloud layers with the various CALIOP cloud phases is shown. Only one cloud particle phase is allowed for each 5 km portion of a cloud layer that is considered by the cloud phase algorithm, so we use in situ aircraft and CloudSat observations to determine how the CALIOP cloud phase algorithm is treating optically and thermally thick clouds, which may be mixed-phase.

Melody Avery↗
NASA NTRSDate not supplied

Improvements in CALIOP Smoke Optical Depth over Clouds

Smoke over marine stratocumulus is ubiquitous off the southwest coast of Africa during biomass burning season. Past studies have shown that CALIOP overestimates the base altitudes of strongly attenuating smoke layers. This is because CALIOP layer detection operates on the 532 nm attenuated backscatter signal. Smoke strongly attenuates light at this wavelength, so CALIOP feature detection at times assigns a base altitude that is higher than the true layer base for optically thick layers. In order to improve the AOD for smoke over clouds, a new algorithm has been implemented in for an upcoming CALIOP level 2 data release that will extend the base altitudes of smoke layers over clouds. This poster summarizes the new smoke base extension algorithm and its performance.

Jason L. Tackett↗
NASA NTRSDate not supplied

Comparison of the CALIPSO Level 3 Ice Cloud Product with the DARDAR and 2C-ICE products

Understanding the vertical distribution of ice clouds is crucial for climate modeling and weather forecasting. Since its launch to space in 2006, the Cloud-Aerosol Lidar with Orthogonal Polarization instrument (CALIOP) onboard the CALIPSO spacecraft has been providing unprecedented high-quality profiles of ice clouds, especially optically thin cirrus clouds, during both day and night, on a global scale. Recently the lidar science working group at the NASA Langley Research Center delivered a level 3 (L3) ice cloud product which reports monthly statistics of ice cloud extinction coefficient and ice water content on a uniform 3-dimensional spatial grid. This presentation compares the ice cloud climatology derived from this product with two other ice cloud products, namely the raDAR/liDAR(DARDAR) ice cloud product and the CloudSat-CALIPSO Ice Cloud Property Product (2C-ICE). Using processing similar to the CALIPSO L3 product, granules of DARDAR and 2C-ICE data have been processed into monthly statistics for a better comparison. Similarities and differences will be presented and discussed. The findings illustrate the strengths of the different products and help to identify which product might be most appropriate for a given research topic.

Xia Cai↗
NASA NTRSDate not supplied

Volcanic Eruptions and Effects on our Climate

Volcanoes are an integral part of the Earth system and are formed by intrusions of magma that 'bubble up’ from Earth’s interior (e.g., lava lamp). They can form above thin areas of the Earth’s crust/ lithosphere known as ‘hot spots or mantle plumes’ such as the Hawaiian Islands or Yellowstone National Park. More commonly they form along ‘subduction zones’ where the thinner oceanic tectonic plates slide below the thicker continental plates. Many of the most active (and violent) volcanos lie along subduction zones known as the Pacific 'Ring of Fire’.

Volcanos↗
NASA NTRSDate not supplied

Automated Tracking of Shallow Maritime Clouds on Geostationary Imagery to Extract Lifecycle Characteristics

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Satellites have provided valuable insight on shallow clouds, such as size, structure, and geographical coverage, from static views of recurring cloud fields. But determining why certain cloud features appear and persist for different periods requires a time-evolving view of their behaviors. Geostationary satellites provide a unique opportunity to follow the time evolution of individual convective features, given their enhanced spatial and temporal sampling. A cloud-tracking tool was developed to identify properties of cloud lifecycle from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2EX) field campaign of 2019. The mission conducted intensive sampling of shallow cumulus in the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus were segmented according to thresholds in 0.5-km visible reflectance and with blurring techniques. Despite being limited to daytime hours, the segmentations yielded the best resolution available for capturing cloud initiation, growth, and decay. The tracking procedure is based on a computer vision package that includes Kalman filters for motion prediction, object overlap search, and the Hungarian (or Kuhn-Munkres) matching algorithm for track designation. AHI radiances available within the tracked cloud boundaries are assembled to form individual spectral histories. The resulting catalog provides thousands of cloud histories for domains measuring only a few degrees in latitude and longitude. We present an overview of the cloud-tracking tool and its results for cloud fields sampled throughout CAMP2EX by the airborne P-3. Cloud tracks were selected from about 10 flights to form ensembles, specific groups of tracks occurring in a region with airborne sampling. Cloud lifecycle properties, including duration and maximum area, are calculated for all ensemble members, and analyzed for cloud behavior and P-3 coincidences. By following this strategy, we quantitatively assess the degree of airborne sampling for specific cloud classes defined by the lifecycle calculations. We can summarize which cloud classes had more sampling, the stage of development during sampling, and general differences in character (e.g., isolated congestus vs. cold-pool producer).

Cloud Tracking↗
NASA NTRSDate not supplied

CALIPSO Final Data Product Status

The CALIPSO project is preparing for the end of the mission in October 2025. In this poster we provide detailed summaries of each final data products that will be released, a concise description of the changes between each of these final products and their previous versions, and a target release schedule. A summary of all of the steps that will be carried outby the CALIPSO project during the remainder of the mission for long term data discoverability and accessibility will also be provided.

Brian Getzewich↗