Engineering Papers⌕ Search

Engineering topics

Charles R Trepte

Publications and source records attributed to Charles R Trepte.

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

CALIPSO Level 3 Stratospheric Aerosol Product: Version 1.00 Algorithm Description and Initial Assessment

In August 2018,the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) project released a new level 3 stratospheric aerosol profile data product derived from nearly 12 years of measurements acquired by the space-borne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP).This monthly averaged, gridded level 3 product is based on version 4.2 of the CALIOP level 1 and level 2 data products, which feature significantly improved calibration that now makes it possible to reliably retrieve profiles of stratospheric aerosol extinction and backscatter coefficients. This paper describes the science algorithm and data handling techniques that were developed to generate the CALIPSO version 1.00 level 3 stratospheric aerosol profile product. Further, we show that the retrieved extinction profiles capture the major stratospheric perturbations over the last decade resulting from volcanic eruptions, extreme smoke events, and signatures of stratospheric dynamics. Initial assessment of the product by inter-comparison with the stratospheric aerosol retrievals from the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station (ISS) indicates good agreement in the tropical stratospheric aerosol layer (30oN-30oS),where the average difference between zonal mean extinction profiles is typically less than 25% between 20km and 30km. However, differences can exceed 100% in the very low aerosol loading regimes found above 25 km at higher latitudes.

Jayanta Kar↗
NASA NTRSDate not supplied

The NASA Applied Sciences Program: Volcanic Ash Observations and Applications

Since 2000, the NASA Applied Sciences Program has been actively transitioning observations and research to operations. Particular success has been achieved in developing applications for NASA Earth Observing Satellite (EOS) sensors, integrated observing systems, and operational models for volcanic ash detection, characterization, and transport. While other observations and applications remain to be developed for the current constellation of NASA EOS sensors and integrated with observing and forecast systems, future requirements and capabilities for volcanic ash observations and applications are also being developed. Many of these are based on technologies currently being tested on NASA aircraft, Unmanned Aerial Systems (UAS) and balloons. All of these efforts and the potential advances that will be realized by integrating them are shared in this presentation.

John J Murray↗
NASA NTRSDate not supplied

TPSAS-NF1676L-11855-DND

Understanding climate and climate change requires characterizing and quantifying the individual components of the Earth energy budget. Satellite lidar now provides new capabilities to improve the characterization of cloud and aerosol impacts on the radiation budget. This talk will discuss fundamentals of the lidar remote sensing, current applications of data from the CALIOP spaceborne lidar to climate studies, and discuss prospects for constraining the energy budget using satellite lidars now in development.

David M Winker↗
NASA NTRSDate not supplied

Improvements in CALIOP Smoke Optical Depth over Clouds

Smoke over marine stratocumulus is ubiquitous off the south west coast of Africa during biomass burning season. The vertical profile measurements provided by the CALIOP lidar are successfully able to distinguish between smoke and underlying clouds. With over 14 years of observations, the CALIOP data set is a valuable asset for quantifying the radiative impact of smoke over clouds in this region. However past studies have shown that CALIOP overestimates the base altitudes of strongly attenuating smoke layers. This is because CALIOP layer detection operates on the 532 nm attenuated backscatter signal. Smoke strongly attenuates light at this wavelength, so CALIOP feature detection at times assigns a base altitude that is higher than the true layer base for optically thick layers. This can be confirmed by the 1064 nm attenuated backscatter signal, also measured by CALIOP. In order to improve the AOD for smoke over clouds, a new algorithm has been implemented in for an upcoming CALIOP level 2 data release that will extend the base altitudes of smoke layers over clouds. Tunable restrictions are put in place to ensure that smoke bases are only extended within a reasonable smoke-to-cloud gap distance and only when there is strong reason to believe that smoke exists within the gap. This presentation will summarize the new smoke base extension algorithm and summarize its performance. We will demonstrate that base extension is primarily invoked off the south west coast of Africa as expected. We will also quantify the increase in smoke AOD that will be reported in the upcoming level 2 data release.

Jason L Tackett↗
NASA NTRSDate not supplied

Mapping Aerosol Lidar Ratios Over Ocean using MODIS AOD Constrained Retrievals and GOCART Model Simulations

After 17 years, the NASA Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission ceased science operations in August 2023. For the final CALIPSO data products release (Version 5), the CALIPSO project seeks to improve the accuracy of its aerosol extinction by advancing knowledge of aerosol lidar ratios (i.e., extinction-to-backscatter ratios; LRs) for various aerosol types. The current algorithm assigns one LR value globally for each of the seven tropospheric aerosol types. The CALIPSO team aims to improve the retrieval algorithm through the development of regional and seasonal LR climatologies for the same aerosol types. In this study, aerosol LRs are inferred through Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) backscatter profiles constrained by collocated aerosol optical depth (AOD) from Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data over oceans during daytime. This analysis is subsampled for those profiles that are cloud-free and contain only one CALIOP-classified aerosol type. The CALIOP profiles are then collocated with aerosol volume fractions obtained through Goddard Chemistry Aerosol Radiation and Transport (GOCART) model simulations. This presentation will reveal findings that the 12-year (June 2006-August 2018) mean spatial distributions of inferred aerosol LRs for CALIOP-classified marine and dusty marine aerosols correspond inversely with patterns of GOCART sea salt volume fraction (SSVF). For example, smaller SSVFs (< 65%) and larger LRs (> 55 sr), are found near land masses (Fig. 1). This indicates the influence of advected anthropogenic aerosols (e.g., pollution and biomass burning smoke). In the remote oceans (i.e., regions likely less impacted by non-sea salt aerosols), the SSVFs are larger (> 95%) and the LRs are smaller (< 25 sr) (Fig. 1). A polynomial fit of the MODIS AOD constrained LRs to the corresponding GOCART SSVFs (intersect values of ~58 sr for SSVF of 0% and ~21 sr for SSVF of 100%) is further used to produce model-assisted climatological LR maps on seasonal scales. Additionally, we will show results of a LR validation analysis for which we compare the revised CALIPSO AODs obtained by applying the seasonal/regional constrained LRs against CALIPSO Version 4.51 Ocean Derived Column Optical Depth (ODCOD). While the majority of the presentation will focus on LRs for CALIOP-classified marine and dusty marine aerosols, an overview of LR results will show preliminary results for other aerosol types over ocean, such as dust and elevated smoke. The technique demon-strated in this study highlights the benefits not only to the final planned CALIPSO data release in 2025, but similar methods can be applied to future spaceborne elastic backscatter lidars with collocated passive sensors (e.g., such as those associated with NASA’s proposed Atmosphere Observing System).

Travis D Toth↗