Engineering Papers⌕ Search

Engineering topics

Chapman, J.

Publications and source records attributed to Chapman, J..

The New Small Wheel electronics

The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that don't originate from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the “small” Thin Gap Chambers, with a total of 2.45 million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm 2 at the expected HL-LHC luminosity of $\mathcal{L}$= 7.5 × 10 34 cm -2 s -1 . The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.

47 OTHER INSTRUMENTATION↗

Computational modelling and experimental tank testing of the multi float WaveSub under regular wave forcing

A submerged wave device generates energy from the relative motion of floating bodies. In WaveSub, three floats are joined to a reactor; each connected to a spring and generator. Electricity generated damps the orbital movements of the floats. The forces are non-linear and each float interacts with the others. Tuning to the wave climate is achieved by changing the line lengths, so there is a need to understand the performance trade-offs for a large number of configurations. This requires an efficient, large displacement, multidirectional, multi-body numerical scheme. Results from a 1/25 scale wave basin experiment are described. Here, we show that a time domain linear potential flow formulation (Nemoh, WEC-Sim) can match the tank testing provided that suitably tuned drag coefficients are employed. Inviscid linear potential models can match some wave device experiments; however, additional viscous terms generally provide better accuracy. Scale experiments are also prone to mechanical friction, and we estimate friction terms to improve the correlation further. The resulting error in mean power between numerical and physical models is approximately 10%. Predicted device movement shows a good match. Overall, drag terms in time domain wave energy modelling will improve simulation accuracy in wave renewable energy device design. to understand the performance trade-offs for a large number of configurations. This requires an efficient, large displacement, multidirectional, multi-body numerical scheme. Results from a 1/25 scale wave basin experiment are described. Here, we show that a time domain linear potential flow formulation (Nemoh, WEC-Sim) can match the tank testing provided that suitably tuned drag coefficients are employed. Inviscid linear potential models can match some wave device experiments; however, additional viscous terms generally provide better accuracy. Scale experiments are also prone to mechanical friction, and we estimate friction terms to improve the correlation further. The resulting error in mean power between numerical and physical models is approximately 10%. Predicted device movement shows a good match. Overall, drag terms in time domain wave energy modelling will improve simulation accuracy in wave renewable energy device design.

16 TIDAL AND WAVE POWER↗

A comprehensive computational study of adatom diffusion on the aluminum (1 0 0) surface

The complexity of adatom diffusion on the Al (1 0 0) surface is reflected by the existence of several low-energy non-trivial atomic exchange or vacancy formation mechanisms involving concerted motion of several (3–7) atoms. Interestingly, these mechanisms have energy barriers lower than or comparable to that of the simple (and intuitive) hopping mechanism commonly observed on other surface facets. While prior studies mainly used classical potentials to understand diffusion processes active on Al (1 0 0) surface, we use accurate (and expensive) density functional theory (DFT) computations to estimate barriers associated with nine low-energy and non-trivial adatom diffusion mechanisms. We find that there exist several exchange mechanisms with energy barriers less than or equal to that of the trivial hop mechanism. Furthermore, several of the atomic exchange mechanisms have barriers within 0.2 eV of that of the simple hop, thereby highlighting mechanisms that can be relevant during surface/crystal growth. Our results paint a highly complex picture of the diffusion landscape on Al (1 0 0) and provide insights into how such mechanisms may contribute toward large length- and time-scale surface phenomena. The results presented in this work may also have implications for other fcc metals. Further, we show that some of the commonly used interatomic potentials fail to accurately capture the details of adatom diffusion on Al (1 0 0). The presented benchmark DFT dataset can thus be utilized to parameterize/retrain such potentials.

36 MATERIALS SCIENCE↗

A programmable time alignment scheme for detector signals from the upgraded muon spectrometer at the ATLAS experiment

We present a programmable time alignment scheme used in an ASIC for the ATLAS forward muon trigger development. The scheme utilizes regenerated clocks with programmable phases to compensate for the timing offsets introduced by different detector trace lengths. Each ASIC used in the design has 104 input channels with delay compensation circuitry providing steps of ~ 3 ns and a full range of 25 ns for each channel. Detailed implementation of the scheme including majority logic to suppress single-event effects is presented. The scheme is flexible and fully synthesizable. Here, the approach is adaptable to other applications with similar phase shifting requirements. In addition, the design is resource efficient and is suitable for cost-effective digital implementation with a large number of channels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large Observatory for X-ray Timing (LOFT-P): A Probe-Class Mission Concept Study

LOFT-P is a mission concept for a NASA Astrophysics Probe-Class (less than $1B) X-ray timing mission, based on the LOFT M-class concept originally proposed to ESA's M3 and M4 calls. LOFT-P requires very large collecting area, high time resolution, good spectral resolution, broadband spectral coverage (2-30 keV), highly flexible scheduling, and an ability to detect and respond promptly to time-critical targets of opportunity. Many of LOFTP's targets are bright, rapidly varying sources, so these measurements are synergistic to imaging and high-resolution spectroscopy instruments, addressing much smaller distance scales than are possible without very long baseline X-ray interferometry, and using complementary techniques to address the geometry and dynamics of emission regions. LOFT-P was presented as an example mission to the head of NASA's Astrophysics Division, to demonstrate the strong community support for creation of a probe-class, for missions costing between $500M and $1B. We submitted a white paper4 in response to NASA PhysPAG's call for white papers: Probe-class Mission Concepts, describing LOFT-P science and a simple extrapolation from the ESA study costs. The next step for probe-class missions will be input into the NASA Astrophysics Decadal Survey to encourage the creation of a probe-class opportunity. We report on a 2016 study by MSFC's Advanced Concepts Office of LOFT-P, a US-led probe-class LOFT concept.

x-ray↗

Fate and transport of contaminants at soils sites - 15512

As part of the Soils Activity of the Environmental Management Operations at the NNSA, Nevada Field Office, radionuclide-contaminated Soils sites will undergo regulatory closure in accordance with the 1996 Nevada Federal Facilities Agreement and Consent Order. One closure alternative that has been evaluated for each Soils site has been -closure-in-place- with fencing and posting, along with administrative controls. However, potential disturbance agents for radionuclide-contaminated soils left in place are possible erosion and transport by wind and water. Previous work with radionuclide-contaminated soils has indicated that the highest activity levels of Pu tend to be found in the fine sands, silts, or clays, which are the most likely particle sizes to be transported by wind re-suspension, and by runoff flow events. Monitoring and sampling stations have been deployed at specific Soils sites to collect meteorological data, airborne particulate filter samples, and both suspended and bed-load sediment transport samples during and after runoff flow events, as needed. The primary objective of the air monitoring and sampling stations is to evaluate whether there is wind transport of radionuclide-contaminated soils from Soils sites. The primary objective of the precipitation and runoff flow data collection, as well as both suspended and bed-load sediment sampling, is to determine during which rainfall events (i.e., precipitation return interval, duration, and intensity) radionuclide-contaminated soils are likely to be transported. The NNSS continues to demonstrate compliance with US DOE Order 458.1 for the Radiation Protection of the Public and the Environment, as reported in annual environmental reports. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Survey of Technologies Relevant to Defense From Near-Earth Objects

Several recent near-miss encounters with asteroids and comets have focused attention on the threat of a catastrophic impact with the Earth. This Technical Publication reviews the historical impact record and current understanding of the number and location of near-Earth objects (NEOs) to address their impact probability. Various ongoing projects intended to survey and catalog the NEO population are also reviewed. Details are given of a Marshall Space Flight Center-led study intended to develop and assess various candidate systems for protection of the Earth against NEOs. Details of analytical tools, trajectory tools, and a tool that was created to model both the undeflected inbound path of an NEO as well as the modified, postdeflection path are given. A representative selection of these possible options was modeled and evaluated. It is hoped that this study will raise the level of attention about this very real threat and also demonstrate that successful defense is both possible and practicable, provided appropriate steps are taken.

Adams, R. B.↗

Survey of Technologies Relevant to Defense From Near-Earth Objects

Several recent near-miss encounters with asteroids and comets have focused attention on the threat of a catastrophic impact with the Earth. This Technical Publication reviews the historical impact record and current understanding of the number and location of near-Earth objects (NEOs) to address their impact probability. Various ongoing projects intended to survey and catalog the NEO population are also reviewed. Details are given of a Marshall Space Right Center-led study intended to develop and assess various candidate systems for protection of the Earth against NEOs. Details of analytical tools, trajectory tools, and a tool that was created to model both the undeflected inbound path of an NEO as well as the modified, post-deflection path are given. A representative selection of these possible options was modeled and evaluated. It is hoped that this study will raise the level of attention about this very real threat and also demonstrate that successful defense is both possible and practicable, provided appropriate steps are taken.

Adams, R. B.↗

Engineering of the Magnetized Target Fusion Propulsion System

Engineering details are presented for a magnetized target fusion (MTF) propulsion system designed to support crewed missions to the outer solar system. Basic operation of an MTF propulsion system is introduced. Structural, thermal, radiation-management and electrical design details are presented. The propellant storage and supply system design is also presented. A propulsion system mass estimate and associated performance figures are given. The advantages of helium-3 as a fusion fuel for an advanced MTF system are discussed.

Statham, G.↗

Crewed Mission to Callisto Using Advanced Plasma Propulsion Systems

This paper describes the engineering of several vehicles designed for a crewed mission to the Jovian satellite Callisto. Each subsystem is discussed in detail. Mission and trajectory analysis for each mission concept is described. Crew support components are also described. Vehicles were developed using both fission powered magneto plasma dynamic (MPD) thrusters and magnetized target fusion (MTF) propulsion systems. Conclusions were drawn regarding the usefulness of these propulsion systems for crewed exploration of the outer solar system.

Adams, R. B.↗

Engineering of the Magnetized Target Fusion Propulsion System

Engineering details are presented for a magnetized target fusion (MTF) propulsion system designed to support crewed missions to the outer solar system. Structural, thermal and radiation-management design details are presented. Propellant storage and supply options are also discussed and a propulsion system mass estimate is given.

Statham, G.↗

Continuous, Multielement, Hot-Film Transition Gage

Accurate measurement of location where laminar boundary layer undergoes transition to turbulent one serves many purposes in basic aero-dynamic research and developmental testing. Individual gages must be staggered to prevent formation of turbulence at gages downstream. This arrangement precludes accurate measurements of laminar/turbulent transition regions along streamline. Complete understanding of performance, stability, and control of laminar-flow airplane requires knowledge of transition locations on wing surface, empennage surfaces, fuselage, and nacelles. Visual, acoustic, and electronic methods capable of providing this transition information.

Holmes, B.↗