Engineering topics

Chapman, Gary T.

Publications and source records attributed to Chapman, Gary T..

22 records · Page 2

NASA NTRS1987

A numerical study of flare stabilized projectiles at Mach 7.0

The effect of nose shape on two flare stabilized projectiles was studied using a Parabolized Navier-Stokes code. Pressure coefficients, forces and moments, skin friction coefficients, and Stanton number calculations are presented for the hemisphere-cylinder-flare and the cone-cylinder-flare configurations. Pitching moment and static margin plots versus flare angles and flare lengths are presented in a parametric study to show aerodynamic stability effects. Distinctly different flow field values of pressure, local Mach number, and dynamic pressure were generated by the two different nose configurations. These flow field values just upstream of the flare will be examined. The code demonstrated its value as a design tool by making a clear distinction between aerodynamically stable characteristics for this variety of nose shapes, flare angles, and flare lengths.

Hughson, Montgomery C.↗

NASA NTRS1987

A study of multi-body aerodynamic interference at transonic Mach numbers

A wind tunnel experiment involving single, double, and triple combinations of mutually interfering generic, unfinned aircraft stores has been conducted. Each combination of stores was tested at Mach numbers from 0.60 to 1.20 and at angles of attack from 0 to 25 deg for the single store and from 0 to 6 deg for the double and triple store configurations. Extensive axial and circumferential pressure and flow visualization data at each store location were obtained. Euler solutions for each configuration at 0 deg incidence have been generated and compared with experimental data. This comparison indicates an Euler flow solver can yield accurate predictions of the location and magnitude of multibody interference provided an appropriate grid is used and the viscous effects associated with these configurations remain small. The data indicate multibody interference in the transonic region increases as the freestream Mach number approaches 1 from either direction, and subsides as the Mach number moves away from sonic conditions. This interference is characterized by a large, localized reduction in pressure on the inboard surfaces of the bodies which results in forces that draw the configuration closer together.

Cottrell, Charles J.↗

NASA NTRS1961

Transition of the Laminar Boundary Layer on a Delta Wing with 74 degree Sweep in Free Flight at Mach Numbers from 2.8 to 5.3

The tests were conducted at Mach numbers from 2.8 to 5.3, with model surface temperatures small compared to boundary-layer recovery temperature. The effects of Mach number, temperature ratio, unit Reynolds number, leading-edge diameter, and angle of attack were investigated in an exploratory fashion. The effect of heat-transfer condition (i.e., wall temperature to total temperature ratio) and Mach number can not be separated explicitly in free-flight tests. However, the data of the present report, as well as those of NACA TN 3473, were found to be more consistent when plotted versus temperature ratio. Decreasing temperature ratio increased the transition Reynolds number. The effect of unit Reynolds number was small as was the effect of leading-edge diameter within the range tested. At small values of angle of attack, transition moved forward on the windward surface and rearward on the leeward surface. This trend was reversed at high angles of attack (6 deg to 18 deg). Possible reasons for this are the reduction of crossflow on the windward side and the influence of the lifting vortices on the leeward surface. When the transition results on the 740 delta wing were compared to data at similar test conditions for an unswept leading edge, the results bore out the results of earlier research at nearly zero heat transfer; namely, sweep causes a large reduction in the transition Reynolds number.

Chapman, Gary T.↗

NASA NTRS1959

The Stabilizing Effectiveness of Conical Flares on Bodies with Conical Noses

An analysis is presented of published results of force tests on 80 cone-cylinder-flare configurations at Mach numbers of 2.18, 2.81, and 4.04. The contributions, excluding interference effects, of the cone-cylinder bodies to the over-all normal force derivatives have been removed by means of the second-order shock-expansion method, and the normal force derivatives at zero angle of attack due to the flares alone are shown. The results from a wide variety of configurations are correlated by plotting ratios of the normal force derivatives of the flares to the normal force derivatives of cones having the same included angle. Comparisons are made of the experimental normal force results with the normal force derivatives obtained by assuming conical flow over the flares and with those obtained by use of the second-order shock-expansion method. The comparisons show that use of the second-order shock-expansion method is generally the superior of the two, and in most cases gives values of the normal force derivatives of the flares which agree very well with the experimental results. Centers of pressure of the flares are presented and comparisons are made with results obtained from the theories mentioned. In general, the comparisons show that the assumption of conical flow over the flares is comparable to use of the second-order shock-expansion method in determining the centers of pressure, and in many cases both methods give values which agree closely with the experimental results.

Kirk, Donn B.↗