Engineering Papers⌕ Search

Engineering topics

Chao, Y.

Publications and source records attributed to Chao, Y..

At least 19 records

Alignment of the SLC Final Focus System Using Beam Orbits

Beambasedalignmenti s beingroutinely applied in the SLC Final Focus and has proved to be a very useful tool for deEerminingthe quality of the zeroth order orbit as defined by variousbeaml ine elements.Given the stringentr equirementon thebeamquality at the interactionpoint (IF’),a well alignedbeam line is essentiali n that it minimizes the confusion which would otherwisearise in the higher order optics, the demandcalled on the correctorswhich also serveasoptical knobs,andt he problem associatedw ith the backgroundr adiation. In the SLC final focus we have beenrelying on an interplay betweent he field survey (mechanical alignment) and the orbit analysis (beam based alignment) to achieve this purpose. Mechanical alignment generallyprovidescoordinatei nformation of various beaml ine elementsa ndoffset valuesi nferredf rom thesedataandt hemodel of the beam line. Beam basedalignment is done mainly by recording the beam orbit under controlled experiment where optical elementsor orbit conditions are varied. Due to the complexity of the beamline layout and special power supply configurationi n the SLC Final Focus,t he latter methodi s useful only whencoupledwith off-line analysiswhich disentanglesthe datat aken at eachmeasurement.I n this report we describet he techniquesusedand the underlying principle, the procedureas appliedi n the Final Focus,t he outcomeof this exerciseandsome problemsencountere

Chao, Y.↗

Measurement of the branching fraction and C P asymmetry in B 0 → π 0 π 0 decays, and an improved constraint on φ 2

Here, we measure the branching fraction and C P violation asymmetry in the decay B 0 → π 0 π 0 , using a data sample of 752 × 10 6 B B ¯ pairs collected at the Υ ( 4 S ) resonance with the Belle detector at the KEKB e + e - collider. The obtained branching fraction and direct C P asymmetry are B ( B → π 0 π 0 ) = [ 1.31 ± 0.19 ( stat ) ± 0.19 ( syst ) ] × 10 - 6 and A C P = + 0.14 ± 0.36 ( stat ) ± 0.10 ( syst ) , respectively. The signal significance, including the systematic uncertainty, is 6.4 standard deviations. Furthemore, we combine these results with Belle’s earlier measurements of B 0 → π + π - and B ± → π ± π 0 to exclude the C P -violating parameter φ 2 from the range 15.5 ° < φ 2 < 75.0 ° at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Erratum: Measurement of azimuthal asymmetries in inclusive production of hadron pairs in e⁺e⁻ annihilation at √s=10.58 GeV [Phys. Rev. D 78, 032011 (2008)]

In the original article, it was found in Monte Carlo simulations that the reconstructed A₀ results are roughly consistent with the generated asymmetries, while the A₁₂ results systematically underestimate the generated asymmetries. This underestimation can be attributed to the difference between the reconstructed thrust axis and the original quark-antiquark axis. The corresponding correction factors are 1.6 ± 0.04 for the A₁₂ results and 1.11 ± 0.05 for the A₀ results. Because of a flaw in the original analysis program, these correction factors were not applied to the A UC -type asymmetries in Table V as well as in some figures. In addition, a small mistake in the error propagation in the charm correction resulted in slightly underestimated statistical uncertainties. These omissions affect all but the charm asymmetry results. The correct central values are therefore given in Tables IV and V of this Erratum. The systematic uncertainties of the original publication remain unchanged.

Seidl, R.↗

Search for B 0 decays to invisible final states at Belle

We report a search for B0 decays into invisible final states using a data sample of 657×106 B$\bar{B}$B pairs collected at the Υ(4S) resonance with the Belle detector at the KEKB e + e - collider. The signal is identified by fully reconstructing a hadronic decay of the accompanying B meson and requiring no other particles in the event. No significant signal is observed, and we obtain an upper limit of 1.3×10 -4 at the 90% confidence level for the branching fraction of invisible B 0 decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of B - →$\bar{p}$ΛD 0 at Belle

We study B- meson decays to $\bar{p}$ΛD (*)0 final states using a sample of 657×10 6 B$\bar{B}$ events collected at the Υ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e + e - collider. The observed branching fraction for B - →$\bar{p}$ΛD 0 is (1.43$+0.28\atop{-0.25}$±0.18)×10 -5 with a significance of 8.1 standard deviations, where the uncertainties are statistical and systematic, respectively. Most of the signal events have the $\bar{p}$ Λ mass peaking near threshold. No significant signal is observed for $\bar{p}$ΛD (*)0 and the corresponding upper limit on the branching fraction is 4.8×10 -5 at the 90% confidence level.

43 PARTICLE ACCELERATORS↗

Measurement of the decay B{sup 0}{yields}{pi}{sup -}l{sup +}{nu} and determination of |V{sub ub}|

We present a measurement of the charmless semileptonic decay B{sup 0}{yields}{pi}{sup -}l{sup +}{nu} using a data sample containing 657x10{sup 6} BB events collected with the Belle detector at the KEKB asymmetric-energy e{sup +}e{sup -} collider operating near the {Upsilon}(4S) resonance. We determine the total branching fraction of the decay, B(B{sup 0}{yields}{pi}{sup -}l{sup +}{nu})=(1.49{+-}0.04(stat){+-}0.07(syst))x10{sup -4}. We also report a new precise measurement of the differential decay rate and extract the Cabibbo-Kobayashi-Maskawa matrix element |V{sub ub}| using model-independent and model-dependent approaches. From a simultaneous fit to the measured differential decay rate and lattice QCD results, we obtain |V{sub ub}|=(3.43{+-}0.33)x10{sup -3}, where the error includes both experimental and theoretical uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗