Engineering Papers⌕ Search

Engineering topics

Chang, Liang

Publications and source records attributed to Chang, Liang.

Superstructured NiMoO 4 @CoMoO 4 core-shell nanofibers for supercapacitors with ultrahigh areal capacitance

High areal capacitance for a practical supercapacitor electrode requires both large mass loading and high utilization efficiency of electroactive materials, which presents a great challenge. Herein, we demonstrated the unprecedented synthesis of superstructured NiMoO 4 @CoMoO 4 core-shell nanofiber arrays (NFAs) on a Mo-transition-layer-modified nickel foam (NF) current collector as a new material, achieving the synergistic combination of highly conductive CoMoO 4 and electrochemical active NiMoO 4 . Moreover, this superstructured material exhibited a large gravimetric capacitance of 1,282.2 F/g in 2 M KOH with a mass loading of 7.8 mg/cm 2 , leading to an ultrahigh areal capacitance of 10.0 F/cm 2 that is larger than any reported values of CoMoO 4 and NiMoO 4 electrodes. In conclusion, this work provides a strategic insight for rational design of electrodes with high areal capacitances for supercapacitors.

42 ENGINEERING↗

Correlation between the Dzyaloshinskii-Moriya interaction and spin-mixing conductance at an antiferromagnet/ferromagnet interface

The rich interaction phenomena at antiferromagnet (AFM)/ferromagnet (FM) interfaces are key ingredients in AFM spintronics, where many underlying mechanisms remain unclear. Here in this paper we report on a correlation observed between the interfacial Dzyaloshinskii-Moriya interaction (DMI) D S and effective spin-mixing conductance g$↑↓\atop{eff}$ at the IrMn/CoFeB interface. Both DS and g$↑↓\atop{eff}$ are quantitatively determined with Brillouin light-scattering measurements, and increase with IrMn thickness in the range of 2.5 ~ 7.5 nm. Such correlation likely originates from the AFM-states-mediated spin-flip transitions in the FM, which promote both the interfacial DMI and spin pumping effect. Our findings provide deeper insight into the AFM-FM interfacial coupling for future spintronic design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and Synthesis of 3D Potassium-Ion Pre-Intercalated Graphene for Supercapacitors

Here in this paper, a novel material—3D potassium-ion preintercalated graphene—was designed and synthesized via one step using a new reaction between K and CO. Furthermore, this material exhibited excellent performance as electrodes for aqueous symmetrical supercapacitors. When the electrode was scaled up from 3.0 to 8.0 mg/cm 2 , negligible capacitance degradation was observed, leading to a very high areal capacitance of 1.50 F/cm 2 at 1 A/g. Furthermore, even if a large operating temperature of -15 or 55 °C was employed, its excellent electrochemical performance remained with specific capacitances of 208 F/g at 55 °C, 184 F/g at 25 °C, and 98 F/g at -15 °C. This could be attributed to 3D structure and K+ preintercalation of the material, which provides rich active sites for electric double-layer formation, lower ion transport resistance, and shorter diffusion distance.

36 MATERIALS SCIENCE↗

Direct conversion of CO 2 to meso/macro-porous frameworks of surface-microporous graphene for efficient asymmetrical supercapacitors

CO 2 conversion to useful materials is the most attractive approach to control its content in the atmosphere. An ideal electrode material for supercapacitors should possess suitable meso/macro-pores as electrolyte reservoirs and rich micro-pores as places for the adsorption of electrolyte ions. In this paper, we designed and synthesized such an ideal material, meso/macro-porous frameworks of surface-microporous graphene (MFSMG), from CO 2 via its one-step exothermic reaction with potassium. Furthermore, the MFSMG electrode exhibited a high gravimetric capacitance of 178 F g -1 at 0.2 A g -1 in 2 M KOH and retained 85% capacitance after increasing current density by 50 times. The combination of the MFSMG electrode and the activated carbon (AC) electrode constructed an asymmetrical AC//MFSMG capacitor, leading to a high capacitance of 242.4 F g -1 for MFSMG and 97.4 F g -1 for AC. With the extended potential, the asymmetrical capacitor achieved an improved energy density of 9.43 W h kg -1 and a power density of 3504 W kg -1 . Finally, this work provides a novel solution to solve the CO 2 issue and creates an efficient electrode material for supercapacitors.

36 MATERIALS SCIENCE↗

MiR-129-5p inhibits non-small cell lung cancer cell stemness and chemoresistance through targeting DLK1

Non-small cell lung cancer (NSCLC) stemness and chemoresistance represent significant barriers to successful treatment. Downregulation of microRNA 129 (miR-129) has been implicated in a variety of cancers, and miR-129-5p has recently been shown to reduce lung cancer proliferation and metastasis. In this study, we used NSCLC cell lines A549 and H460 to investigate the effects of miR-129-5p on NSCLC stemness and chemoresistance. CD133 + stem cells in both lines showed reduced miR-129-5p expression, and introducing miR-129-5p into these cells reduced stem cell markers and self-renewal ability, as measured by qRT-PCR, western blot, MTT assays, and sphere formation assays. MTT, colony formation, and DAPI staining assays further revealed that miR-129-5p inhibits NSCLC chemoresistance when the cells are treated with varying doses of CDDP. The target prediction algorithm TargetScan allowed us to identify notch signaling receptor delta-like 1 homolog (DLK1) as a potential target for miR-129-5p in its inhibition of NSCLC stemness and chemoresistance. Indeed, our DLK1 luciferase reporter plasmid demonstrated that miR-129-5p reduces DLK1 expression. Furthermore, DLK1 overexpression partially rescued inhibition of NSCLC stemness and chemoresistance caused by miR-129-5p. Overall, these results demonstrate that miR-129-5p inhibits NSCLC stemness and chemoresistance through direct targeting of DLK1. They suggest that miR-129-5p and DLK1 can play a role in an effective treatment strategy for NSCLC.

60 APPLIED LIFE SCIENCES↗

An Ideal Electrode Material, 3D Surface-Microporous Graphene for Supercapacitors with Ultrahigh Areal Capacitance

The efficient charge accumulation of an ideal supercapacitor electrode requires abundant micropores and its fast electrolyte-ions transport prefers meso/macropores. But, current electrode materials cannot meet both requirements, resulting in poor performance. We creatively constructed three-dimensional cabbage-coral-like graphene as an ideal electrode material, in which meso/macro channels are formed by graphene walls and rich micropores are incorporated in the surface layer of the graphene walls. The unique 3D graphene material can achieve a high gravimetric capacitance of 200 F/g with aqueous electrolyte, 3 times larger than that of commercially used activated carbon (70.8 F/g). Furthermore, it can reach an ultrahigh areal capacitance of 1.28 F/cm 2 and excellent rate capability (83.5% from 0.5 to 10 A/g) as well as high cycling stability (86.2% retention after 5000 cycles). The excellent electric double-layer performance of the 3D graphene electrode can be attributed to the fast electrolyte ion transport in the meso/macro channels and the rapid and reversible charge adsorption with negligible transport distance in the surface micropores.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reverberation mapping of the gamma-ray loud narrow-line Seyfert 1 galaxy 1H 0323+342

Recently, 1H 0323+342 has attracted a lot of attention as one of several narrow-line Seyfert 1 galaxies detected in the γ-ray band. To understand their central energy engines and jet phenomena, the black hole mass is important. We made use of the Lijiang 2.4 m Telescope to monitor 1H 0323+342 for more than two months. This galaxy is one of the candidates for a monitoring project of super-Eddington accreting massive black holes. The reverberation mapping shows that Hβ emission has a delayed response of 14.8{sub −2.7}{sup +3.9} days with respect to the SDSS g′ light curve in the rest frame. The optical Fe ii variations were detected after subtracting host contaminations, and a reverberation with a delay of 15.2{sub −4.1}{sup +7.4} days was found in the rest frame. By assuming the viral factor f {sub BLR} = 6.17 for the broad-line region (BLR) velocity characterized by FWHM because of the face-on orientation, we find that the black hole mass derived from Hβ is M{sub ∙}=3.4{sub −0.6}{sup +0.9}×10{sup 7}M{sub ⊙}, and the accretion rate is M-dot =1.11{sub −0.47}{sup +0.69}, where M-dot = M-dot {sub ∙}c{sup 2}/L{sub Edd}, M-dot {sub ∙} is the mass accretion rate, L {sub Edd} is the Eddington luminosity, and c is the speed of light. This black hole is one order less massive than that given by the Magorrian relation from the bulge mass. We test the relation between accretion rates and radio-loudnesses in all mapped radio-loud active galactic nuclei, and find that 1H 0323+342 falls within this group.

79 ASTRONOMY AND ASTROPHYSICS↗

UV–OPTICAL OBSERVATION OF TYPE Ia SUPERNOVA SN 2013dy IN NGC 7250

Extensive and independent observations of Type Ia supernova (SN Ia) SN 2013dy are presented, including a larger set of UBVRI photometry and optical spectra from a few days before the peak brightness to ∼ 200 days after explosion, and ultraviolet (UV) photometry spanning from t ≈ –10 days to t ≈ +15 days refers to the B band maximum. The peak brightness (i.e., M {sub B} = –19.65 ± 0.40 mag; L {sub max} = [1.95 ± 0.55] × 10{sup 43} erg s{sup −1}) and the mass of synthesized {sup 56}Ni (i.e., M ({sup 56}Ni) = 0.90 ± 0.26 M {sub ⊙}) are calculated, and they conform to the expectation for an SN Ia with a slow decline rate (i.e., Δ m {sub 15}( B ) = 0.90 ± 0.03 mag). However, the near infrared (NIR) brightness of this SN (i.e., M {sub H} = –17.33 ± 0.30 mag) is at least 1.0 mag fainter than usual. Besides, spectroscopy classification reveals that SN 2013dy resides on the border of “core normal” and “shallow silicon” subclasses in the Branch et al. classification scheme, or on the border of the “normal velocity” SNe Ia and 91T/99aa-like events in the Wang et al. system. These suggest that SN 2013dy is a slow-declining SN Ia located on the transitional region of nominal spectroscopic subclasses and might not be a typical normal sample of SNe Ia.

79 ASTRONOMY AND ASTROPHYSICS↗

A luminous peculiar type IA supernova SN 2011HR: More like SN 1991T or SN 2007if?

Photometric and spectroscopic observations of a slowly declining, luminous Type Ia supernova (SN Ia) SN 2011hr in the starburst galaxy NGC 2691 are presented. SN 2011hr is found to peak at M{sub B} = −19.84±0.40 mag, with a postmaximum decline rate Δm{sub 15}(B) = 0.92 ± 0.03 mag. From the maximum-light bolometric luminosity, L = (2.30±0.90)×10{sup 43} erg s{sup −1}, we estimate the mass of synthesized {sup 56}Ni in SN 2011hr to be M({sup 56}Ni) = 1.11±0.43 M{sub ⊙}. SN 2011hr appears more luminous than SN 1991T at around maximum light, and the absorption features from its intermediate-mass elements (IMEs) are noticeably weaker than those of the latter at similar phases. Spectral modeling suggests that SN 2011hr has IMEs of ∼0.07 M{sub ⊙} in the outer ejecta, which is much lower than the typical value of normal SNe Ia (i.e., 0.3–0.4 M{sub ⊙}) and is also lower than the value of SN 1991T (i.e., ∼0.18 M{sub ⊙}). These results indicate that SN 2011hr may arise from a Chandrasekhar-mass white dwarf progenitor that experienced a more efficient burning process in the explosion. Nevertheless, it is still possible that SN 2011hr may serve as a transitional object connecting the SN 1991T-like SNe Ia with a superluminous subclass like SN 2007if given that the latter also shows very weak IMEs at all phases.

79 ASTRONOMY AND ASTROPHYSICS↗

Low-dimensional representations of the three component loop braid group

Motivated by physical and topological applications, we study representations of the group LB 3 of motions of 3 unlinked oriented circles in R 3 . Our point of view is to regard the three strand braid group B 3 as a subgroup of LB 3 and study the problem of extending B 3 representations. We introduce the notion of a standard extension and characterize B 3 representations admitting such an extension. In particular we show, using a classification result of Tuba and Wenzl [Pacific J. Math. 197, 491–510 (2001)], that every irreducible B 3 representation of dimension at most 5 has a (standard) extension. We show that this result is sharp by exhibiting an irreducible 6-dimensional B 3 representation that has no extensions (standard or otherwise). Here, we obtain complete classifications of (1) irreducible 2-dimensional LB 3 representations, (2) extensions of irreducible 3-dimensional B 3 representations, and (3) irreducible LB 3 representations whose restriction to B 3 has abelian image.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SDSS J013127.34–032100.1: A NEWLY DISCOVERED RADIO-LOUD QUASAR AT z = 5.18 WITH EXTREMELY HIGH LUMINOSITY

Very few of the z > 5 quasars discovered to date have been radio-loud, with radio-to-optical flux ratios (radio-loudness parameters) higher than 10. Here we report the discovery of an optically luminous radio-loud quasar, SDSS J013127.34–032100.1 (J0131–0321 in short), at z = 5.18 ± 0.01 using the Lijiang 2.4 m and Magellan telescopes. J0131–0321 has a spectral energy distribution consistent with that of radio-loud quasars. With an i-band magnitude of 18.47 and a radio flux density of 33 mJy, its radio-loudness parameter is ∼100. The optical and near-infrared spectra taken by Magellan enable us to estimate its bolometric luminosity to be L {sub bol} ∼ 1.1 × 10{sup 48} erg s{sup –1}, approximately 4.5 times greater than that of the most distant quasar known to date. The black hole mass of J0131–0321 is estimated to be 2.7 × 10{sup 9} M {sub ☉}, with an uncertainty up to 0.4 dex. Detailed physical properties of this high-redshift, radio-loud, potentially super-Eddington quasar can be probed in the future with more dedicated and intensive follow-up observations using multi-wavelength facilities.

79 ASTRONOMY AND ASTROPHYSICS↗

Kitaev models based on unitary quantum groupoids

We establish a generalization of Kitaev models based on unitary quantum groupoids. In particular, when inputting a Kitaev-Kong quantum groupoid H{sub C}, we show that the ground state manifold of the generalized model is canonically isomorphic to that of the Levin-Wen model based on a unitary fusion category C. Therefore, the generalized Kitaev models provide realizations of the target space of the Turaev-Viro topological quantum field theory based on C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

VERY LOW MASS STELLAR AND SUBSTELLAR COMPANIONS TO SOLAR-LIKE STARS FROM MARVELS. I. A LOW-MASS RATIO STELLAR COMPANION TO TYC 4110-01037-1 IN A 79 DAY ORBIT

TYC 4110-01037-1 has a low-mass stellar companion, whose small mass ratio and short orbital period are atypical among binary systems with solar-like (T{sub eff} {approx}< 6000 K) primary stars. Our analysis of TYC 4110-01037-1 reveals it to be a moderately aged ({approx}<5 Gyr) solar-like star having a mass of 1.07 {+-} 0.08 M{sub Sun} and radius of 0.99 {+-} 0.18 R{sub Sun }. We analyze 32 radial velocity (RV) measurements from the SDSS-III MARVELS survey as well as 6 supporting RV measurements from the SARG spectrograph on the 3.6 m Telescopio Nazionale Galileo telescope obtained over a period of {approx}2 years. The best Keplerian orbital fit parameters were found to have a period of 78.994 {+-} 0.012 days, an eccentricity of 0.1095 {+-} 0.0023, and a semi-amplitude of 4199 {+-} 11 m s{sup -1}. We determine the minimum companion mass (if sin i = 1) to be 97.7 {+-} 5.8 M{sub Jup}. The system's companion to host star mass ratio, {>=}0.087 {+-} 0.003, places it at the lowest end of observed values for short period stellar companions to solar-like (T{sub eff} {approx}< 6000 K) stars. One possible way to create such a system would be if a triple-component stellar multiple broke up into a short period, low q binary during the cluster dispersal phase of its lifetime. A candidate tertiary body has been identified in the system via single-epoch, high contrast imagery. If this object is confirmed to be comoving, we estimate it would be a dM4 star. We present these results in the context of our larger-scale effort to constrain the statistics of low-mass stellar and brown dwarf companions to FGK-type stars via the MARVELS survey.

79 ASTRONOMY AND ASTROPHYSICS↗

CFD applications in pump flows

The objective of the proposed paper is to develop a computational procedure that solves incompressible Navier-Stokes equations for pump flows. The solution method is based on the pseudo-compressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. The equations are solved in steadily rotating reference frames and the centrifugal force and the Coriolis force are added to the equation of motion. As a benchmark problem, the flow through the Rocketdyne inducer is numerically simulated. A coarse grid solution is obtained with a single zone by using an algebraic turbulence model. In multi-zone fine grid computation, a one-equation Baldwin-Barth turbulence model is utilized. Numerical results are compared with experimental measurements and a good agreement is found between the two. The resulting computer code is then applied to the flow analysis inside a two-stage fuel pump impeller operating at 80 percent, 100 percent, and 120 percent of design flow.

Kiris, Cetin↗