Deep Space 1 Spacecraft Vibration Qualification Testing
The environmental qualification program for the Deep Space 1 spacecraft included a force-limited random vibration test in two axes.
environmental testing random vibration force limit↗
Engineering topics
Chang, K.
Publications and source records attributed to Chang, K..
Considerations Concerning the Development and Testing of In-situ Materials for Martian Exploration
Natural Martian surface materials are evaluated for their potential use as radiation shields for manned Mars missions. The modified radiation fluences behind various kinds of Martian rocks and regolith are determined by solving the Boltzmann equation using NASA Langley s HZETRN code along with the 1977 Solar Minimum galactic cosmic ray environmental model. To make structural shielding composite materials from constituents of the Mars atmosphere and from Martian regolith for Martian surface habitats, schemes for synthesizing polyimide from the Mars atmosphere and for processing Martian regolith/polyimide composites are proposed. Theoretical predictions of the shielding properties of these composites are computed to assess their shielding effectiveness. Adding high-performance polymer binders to Martian regolith to enhance structural properties enhances the shielding properties of these composites because of the added hydrogenous constituents. Laboratory testing of regolith simulant/polyimide composites is planned to validate this prediction.
Kim, M.-H. Y.↗
Cassini Spacecraft Force Limited Vibration Testing
Explore the source record for details and available documents.
Cassini Vibration Force Limiting↗
A Novel Oscillating Rectenna for Wireless Microwave Power Transmission
A new concept for solid state wireless microwave power transmission is presented. A 2.45 GHz rectenna element that was designed for over 85% RF to dc power conversion efficiency has been used to oscillate at 3.3 GHz with an approximate 1% dc to RF conversion efficiency.
rectenna element design measurements microwave cir↗
35 GHz integrated circuit rectifying antenna with 33 percent efficiency
A 35 GHz integrated circuit rectifying antenna (rectenna) has been developed using a microstrip dipole antenna and beam-lead mixer diode. Greater than 33 percent conversion efficiency has been achieved. The circuit should have applications in microwave/millimeter-wave power transmission and detection.
Yoo, T.-W.↗
Low loss waveguide four-port crossover circuit and its application for cross-slot antenna feed
A four-way crossover circuit using a cylindrical cavity with four rectangular input/output ports has been designed to feed a cross-slot antenna to achieve dual polarization. Because all the input and output circuits are waveguides, the network is especially useful for high power systems and millimeter wave applications. The crossover circuit exhibits a very low insertion loss and good isolation.
Chang, K.↗
Demonstration of microwave power transmission in space
Three experiments are proposed to demonstrate the feasibility of converting dc power into microwave or millimeter-wave beam and transmitting it to users through free space. The generator could be located on earth or on a utility power satellite. The received power would be converted back into dc or ac power. The success of the experiments could lead to the commercial use of this technology.
Chang, K.↗
A simple method for characterizing the RF properties of high-temperature superconductive materials
A simple method using a resonant strip in a rectangular waveguide has been devised for superconductive material characterization. The method has the advantages of simplicity; and it requires only a small piece of the superconductive material. The resonant frequency of the superconductive strip can be predicted theoretically.
Chang, K.↗
Feasibility study of 35 GHz microwave power transmission in space
This paper is a study of the feasibility of a 35-GHz microwave power transmission system in space. It was found that a dc to dc transmission efficiency better than 50 percent can be achieved over a distance of 50 km by using a transmitting antenna of 20 m in diameter and a receiving antenna of 40 m in diameter. Technology requirements at 35 GHz have been assessed and several stages of development have been proposed.
Chang, K.↗
60-GHz integrated-circuit high data rate quadriphase shift keying exciter and modulator
An integrated-circuit quadriphase shift keying (QPSK) exciter and modulator have demonstrated excellent performance directly modulating a carrier frequency of 60 GHz with an output phase error of less than 3 degrees and maximum amplitude error of 0.5 dB. The circuit consists of a 60-GHz Gunn VCO phase-locked to a low-frequency reference source, a 4th subharmonic mixer, and a QPSK modlator packaged into a small volume of 1.8 x 2.5 x 0.35 in. The use of microstrip has the advantages of small size, light-weight, and low-cost fabrication. The unit has the potential for multigigabit data rate applications.
Grote, A.↗
V-band integrated quadriphase modulator
A V-band integrated circuit quadriphase shift keyed modulator/exciter for space communications systems was developed. Intersatellite communications systems require direct modulation at 60 GHz to enhance signal processing capability. For most systems, particularly space applications, small and lightweight components are essential to alleviate severe system design constraints. Thus to achieve wideband, high data rate systems, direct modulation techniques at millimeter waves using solid state integrated circuit technology are an integral part of the overall technology developments.
Grote, A.↗
V-band low-noise integrated circuit receiver
A compact low-noise V-band integrated circuit receiver has been developed for space communication systems. The receiver accepts an RF input of 60-63 GHz and generates an IF output of 3-6 GHz. A Gunn oscillator at 57 GHz is phaselocked to a low-frequency reference source to achieve high stability and low FM noise. The receiver has an overall single sideband noise figure of less than 10.5 dB and an RF to IF gain of 40 dB over a 3-GHz RF bandwidth. All RF circuits are fabricated in integrated circuits on a Duroid substrate.
Chang, K.↗
Solidification studies of monotectic systems
Described is an attempt to determine critical wetting temperatures in monotectic systems and to investigate the wetting phase on container walls and the phase preferential wetting of a monotectic solid.
Chang, K.↗
Solidification phenomena of binary organic mixtures
The coalescence rates and motion of liquid bubbles in binary organic mixtures were studied. Several factors such as temperature gradient, composition gradient, interfacial tension, and densities of the two phases play important roles in separation of phases of immiscible liquids. An attempt was made to study the effect of initial compositions on separation rates of well-dispersed organic mixtures at different temperatures and, ultimately, on the homogeneity of solidification of the immiscible binary organic liquids. These organic mixtures serve as models for metallic pseudo binary systems under study. Two specific systems were investigated: ethyl salicylate - diethyl glycol and succinonitrile - water.
Chang, K.↗
Comparison of drag and mass spectrometer measurements during small geomagnetic disturbances
During small geomagnetic disturbances, ESRO 4 and OGO 6 gas analyzer measurements at high altitudes suggest that helium and atomic oxygen concentrations in the lower thermosphere decrease, whereas satellite drag measurements indicate that density increases. This discrepancy is explained by the corresponding temperature increases maximizing at high latitudes. ESRO 4 data suggest that at altitudes where atomic oxygen or helium predominates, the temperature increase compensates for the decrease in lower thermospheric concentrations. This yields a net density increase with geomagnetic disturbances. The Explorer 39 drag satellite measurements verify this conclusion. It is felt that the composition variations associated with minor disturbances indicate the upwelling of the polar atmosphere, circulation towards the equator, and subsidence in the equatorial region. ESRO measurements show that at low latitudes the increases in helium concentrations with geomagnetic disturbances are chiefly caused by the circulation from high latitudes and the subsidence at lower latitudes.
Keating, G. M.↗