Engineering Papers⌕ Search

Engineering topics

Chang, J.

Publications and source records attributed to Chang, J..

115 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Scaling studies of solar pumped lasers

A progress report of scaling studies of solar pumped lasers is presented. Conversion of blackbody radiation into laser light has been demonstrated in this study. Parametric studies of the variation of laser mixture composition and laser gas temperature were carried out for CO2 and N2O gases. Theoretical analysis and modeling of the system have been performed. Reasonable agreement between predictions in the parameter variation and the experimental results have been obtained. Almost 200 mW of laser output at 10.6 micron was achieved by placing a small sapphire laser tube inside an oven at 1500 K the tube was filled with CO2 laser gas mixture and cooled by longitudinal nitrogen gas flow.

Christiansen, W. H.↗
NASA NTRS1980

Wake characteristics of buildings in disturbed boundary layers

Measurements relevant to the effect of buildings on the low level atmospheric boundary layer are presented. Field measurements of velocity and turbulence in the wake of a block building 3.2 m high and 26.8 m long are presented which show an apparent increase in momentum flow above the upwind value. Velocity-deficit and turbulence-excess decay characteristics of the disturbed or nonequilibrium layer are correlated with power law exponents and apparent roughness length at various distances downstream of the disturbance. Model wake profiles from the simulated building are compared at various stations for equilibrium and nonequilibrium upstream profiles. Empirical correlations relating building wake profiles to upstream nonequilibrium parameters are presented. The relationship of the data to the smooth-rough transition is discussed, and a flow model is presented.

Logan, E., Jr.↗
NASA NTRS1979

The response of a disturbed pipe flow to an upstanding roughness element

The paper describes measurements of mean velocity, turbulence intensity and Reynolds shear stress made downstream of a ring-type roughness element of rectangular cross section situated downstream of an identical element. The distance between the elements was varied, and velocity and turbulence profiles in the wake of the downstream element are compared with wake profiles behind a single element. The results show that the leading element can increase the power law exponent of the velocity profile as the spacing between elements is reduced. Turbulence generated in the wake of the first element raises turbulence intensity in the outer region of the wake of the second. The internal boundary layer originating with the second element grows at a rate which depends on the spacing. It is postulated that the internal boundary layers of subsequent roughness elements are determinants in the formation of a periodic wall layer.

Chang, J.↗
NASA NTRS1978

A comparison of wake characteristics of model and prototype buildings in transverse winds

Previously measured mean velocity and turbulence intensity profiles in the wake of a 26.8-m long building 3.2 m high and transverse to the wind direction in an atmospheric boundary layer several hundred meters thick were compared with profiles at corresponding stations downstream of a 1/50-scale model on the floor of a large meteorological wind tunnel in a boundary layer 0.61 m in thickness. The validity of using model wake data to predict full scale data was determined. Preliminary results are presented which indicate that disparities result from differences in relative depth of logarithmic layers, surface roughness, and the proximity of upstream obstacles.

Logan, E., Jr.↗
NASA NTRS1978

Building wakes in disturbed layers

The wind profiles in the wakes of buildings in a disturbed shear layer are investigated for conditions experienced during aircraft take-off and landing. Experiments were conducted in a pipe flow apparatus in which an equilibrium flow is disturbed by pipe roughness, simulating obstacles upwind of a building, with the disturbed flow made to flow past a second obstacle, simulating a building. Velocity and turbulence profiles of disturbed and equilibrium flows upstream and downstream of the obstacles are presented. It is concluded that the integrated momentum flow of a boundary layer behind an obstacle can be greater than the upstream momentum flow, if the exponent of the upstream velocity profile is sufficiently high and the boundary layer has been disturbed by upstream obstacles. The rise of the turbulence level behind the obstacle is also dependent on the profile exponent in a disturbed layer.

Logan, E.↗
NASA NTRS1969

Plasma physics

Collision effects on cold and warm electron beams in plasma with spatial-temporal development

Boehmer, H.↗