Effect of radiation defects on grain boundary evolution under shock loading
Not Available
36 MATERIALS SCIENCE↗
Engineering topics
Chang, H.
Publications and source records attributed to Chang, H..
Grid-Enhanced, Mobility-Integrated Network Infrastructures for Extreme Fast Charging (GEMINI-XFC)
GEMINI-XFC will use first-of-a-kind integrated high-fidelity grid and transport modeling to identify effective pathways for widespread electrification, to design and evaluate integrated vehicle-grid control schemes, and to optimize electric vehicle integration at a full regional scale with individual customer resolution. Control variables will include: Charging station design and planning (where and what kind of charging stations); EV route scheduling considering grid "status"; and Dispatch of behind-the-meter energy storage and legacy voltage control actuators (on-load tap changes, voltage regulators, capacitors).
DIRECT ENERGY CONVERSION,POWER TRANSMISSION AND DI↗
Gut microbiome partially mediates and coordinates the effects of genetics on anxiety-like behavior in Collaborative Cross mice
Abstract Growing evidence suggests that the gut microbiome (GM) plays a critical role in health and disease. However, the contribution of GM to psychiatric disorders, especially anxiety, remains unclear. We used the Collaborative Cross (CC) mouse population-based model to identify anxiety associated host genetic and GM factors. Anxiety-like behavior of 445 mice across 30 CC strains was measured using the light/dark box assay and documented by video. A custom tracking system was developed to quantify seven anxiety-related phenotypes based on video. Mice were assigned to a low or high anxiety group by consensus clustering using seven anxiety-related phenotypes. Genome-wide association analysis (GWAS) identified 141 genes (264 SNPs) significantly enriched for anxiety and depression related functions. In the same CC cohort, we measured GM composition and identified five families that differ between high and low anxiety mice. Anxiety level was predicted with 79% accuracy and an AUC of 0.81. Mediation analyses revealed that the genetic contribution to anxiety was partially mediated by the GM. Our findings indicate that GM partially mediates and coordinates the effects of genetics on anxiety.
59 BASIC BIOLOGICAL SCIENCES↗
X-ray magnetic circular dichroism and near-edge X-ray absorption fine structure of buried interfacial magnetism measured by using a scanning tunneling microscope tip
Magnetism at buried interfaces plays a crucial role in many emerging phenomena, but detection of interfacial magnetism in close proximity to a surface with elemental and chemical sensitivity is a challenging task. Here, we use a low temperature synchrotron x-ray scanning tunneling microscopy to investigate x-ray magnetic circular dichroism and near edge x-ray absorption fine structure of La 0.67 Sr 0.33 MnO 3 -LaNiO 3 superlattices in the absence of a magnetic field. In stark contrast to the weak magnetic signal of Mn when the La 0.67 Sr 0.33 MnO 3 layers are located on top, a robust x-ray magnetic circular dichroism signal is detected when they are buried underneath the LaNiO 3 layers. The near edge x-ray absorption fine structure reveals the valence states of the manganese while the oxygen K- edge x-ray absorption spectra show an increase in hole formation indicating a cogent charge transfer at the LaNiO 3 /La 0.67 Sr 0.33 MnO 3 interface. This work demonstrates that scanning tunneling microscopy can be extended to the synchrotron X-ray study of buried interfaces by controlling the sample-tip (e.g., detector) separation in the nanometer regime. The close sample-tip proximity further provides a path toward probing of small lateral areas with zero-field measurements in multi-domain samples.
36 MATERIALS SCIENCE↗
Spin caloritronic nano-oscillator
Energy loss due to ohmic heating is a major bottleneck limiting down-scaling and speed of nano-electronic devices, and harvesting ohmic heat for signal processing is a major challenge in modern electronics. Here, we demonstrate that thermal gradients arising from ohmic heating can be utilized for excitation of coherent auto-oscillations of magnetization and for generation of tunable microwave signals. The heat-driven dynamics is observed in Y 3 Fe 5 O 12 /Pt bilayer nanowires where ohmic heating of the Pt layer results in injection of pure spin current into the Y 3 Fe 5 O 12 layer. This leads to excitation of auto-oscillations of the Y 3 Fe 5 O 12 magnetization and generation of coherent microwave radiation. Thus, our work paves the way towards spin caloritronic devices for microwave and magnonic applications.
36 MATERIALS SCIENCE↗
Large Fermi Surface of Heavy Electrons at the Border of Mott Insulating State in NiS 2
One early triumph of quantum physics is the explanation why some materials are metallic whereas others are insulating. While a treatment based on single electron states is correct for most materials this approach can fail spectacularly, when the electrostatic repulsion between electrons causes strong correlations. Not only can these favor new and subtle forms of matter, such as magnetism or superconductivity, they can even cause the electrons in a half-filled energy band to lock into position, producing a correlated, or Mott insulator. The transition into the Mott insulating state raises important fundamental questions. Foremost among these is the fate of the electronic Fermi surface and the associated charge carrier mass, as the Mott transition is approached. We report the first direct observation of the Fermi surface on the metallic side of a Mott insulating transition by high pressure quantum oscillatory measurements in NiS 2 . We find our results point at a large Fermi surface consistent with Luttinger's theorem and a strongly enhanced quasiparticle effective mass. These two findings are in line with central tenets of the Brinkman-Rice picture of the correlated metal near the Mott insulating state and rule out alternative scenarios in which the carrier concentration vanishes continuously at the metal-insulator transition.
36 MATERIALS SCIENCE↗
Large Spin-Wave Bullet in a Ferrimagnetic Insulator Driven by the Spin Hall Effect
Due to its transverse nature, spin Hall effects (SHE) provide the possibility to excite and detect spin currents and magnetization dynamics even in magnetic insulators. Magnetic insulators are outstanding materials for the investigation of nonlinear phenomena and for novel low power spintronics applications because of their extremely low Gilbert damping. Here, we report on the direct imaging of electrically driven spin-torque ferromagnetic resonance (ST-FMR) in the ferrimagnetic insulator Y 3 Fe 5 O 12 based on the excitation and detection by SHEs. The driven spin dynamics in Y 3 Fe 5 O 12 is directly imaged by spatially-resolved microfocused Brillouin light scattering (BLS) spectroscopy. Previously, ST-FMR experiments assumed a uniform precession across the sample, which is not valid in our measurements. A strong spin-wave localization in the center of the sample is observed indicating the formation of a nonlinear, self-localized spin-wave `bullet'.
36 MATERIALS SCIENCE↗
Temperature Sensitivity of an Atomic Vapor Cell-Based Dispersion-Enhanced Optical Cavity
Enhancement of the response of an optical cavity to a change in optical path length, through the use of an intracavity fast-light medium, has previously been demonstrated experimentally and described theoretically for an atomic vapor cell as the intracavity resonant absorber. This phenomenon may be used to enhance both the scale factor and sensitivity of an optical cavity mode to the change in path length, e.g. in gyroscopic applications. We study the temperature sensitivity of the on-resonant scale factor enhancement, S(sub o), due to the thermal sensitivity of the lower-level atom density in an atomic vapor cell, specifically for the case of the Rb-87 D(sub 2) transition. A semi-empirical model of the temperature-dependence of the absorption profile, characterized by two parameters, a(sub o)(T) and gamma(sub a)(T) allows the temperature-dependence of the cavity response, S(sub o)(T) and dS(sub o)/dT to be predicted over a range of temperature. We compare the predictions to experiment. Our model will be useful in determining the useful range for S(sub o), given the practical constraints on temperature stability for an atomic vapor cell.
Myneni, K.↗
Reactive Transport Modeling
This special section in the Vadose Zone Journal focusing on reactive transport modeling was developed from a special symposium jointly sponsored by the Soil Physics and Soil Chemistry Divisions of the Soil Science Society of America at the 2010 annual meetings held in Long Beach, CA. It contains eight contributions reflecting a diverse range of reactive transport modeling applications that address the fate and transport of both reactive solutes and colloidal material (i.e., viruses). Further, the eight studies range in scale from laboratory batch and column experiments to the regional scale. Three of the submissions reflect efforts to model experimental data that were already reported in the literature, providing additional insight concerning underlying physical and chemical processes. In addition to the obvious predictive applications, the eight contributions to this special section illustrate the additional advantages to including reactive transport modeling as an active component within a diverse research agenda. In addition to scenario testing, reactive transport modeling provides a framework for synthesizing diverse experimental data, evaluating the relative importance of various competing and interrelated biogeochemical processes, and identifying important data gaps and research priorities under more natural conditions at multiple temporal and spatial scales.
Seaman, J. C.↗
Tuning the Sensitivity of an Optical Cavity with Slow and Fast Light
We have measured mode pushing by the dispersion of a rubidium vapor in a Fabry-Perot cavity and have shown that the scale factor and sensitivity of a passive cavity can be strongly enhanced by the presence of such an anomalous dispersion medium. The enhancement is the result of the atom-cavity coupling, which provides a positive feedback to the cavity response. The cavity sensitivity can also be controlled and tuned through a pole by a second, optical pumping, beam applied transverse to the cavity. Alternatively, the sensitivity can be controlled by the introduction of a second counter-propagating input beam that interferes with the first beam, coherently increasing the cavity absorptance. We show that the pole in the sensitivity occurs when the sum of the effective group index and an additional cavity delay factor that accounts for mode reshaping goes to zero, and is an example of an exceptional point, commonly associated with coupled non-Hermitian Hamiltonian systems. Additionally we show that a normal dispersion feature can decrease the cavity scale factor and can be generated through velocity selective optical pumping
Smith, David D.↗
Coherence Phenomena in Coupled Optical Resonators
We predict a variety of photonic coherence phenomena in passive and active coupled ring resonators. Specifically, the effective dispersive and absorptive steady-state response of coupled resonators is derived, and used to determine the conditions for coupled-resonator-induced transparency and absorption, lasing without gain, and cooperative cavity emission. These effects rely on coherent photon trapping, in direct analogy with coherent population trapping phenomena in atomic systems. We also demonstrate that the coupled-mode equations are formally identical to the two-level atom Schrodinger equation in the rotating-wave approximation, and use this result for the analysis of coupled-resonator photon dynamics. Notably, because these effects are predicted directly from coupled-mode theory, they are not unique to atoms, but rather are fundamental to systems of coherently coupled resonators.
Smith, D. D.↗
Dynamic balance control in elders: gait initiation assessment as a screening tool
OBJECTIVE: To determine whether measurements of center of gravity-center of pressure separation (CG-CP moment arm) during gait initiation can differentiate healthy from disabled subjects with sufficient specificity and sensitivity to be useful as a screening test for dynamic balance in elderly patients. SUBJECTS: Three groups of elderly subjects (age, 74.97+/-6.56 yrs): healthy elders (HE, n = 21), disabled elders (DE, n = 20), and elders with vestibular hypofunction (VH, n = 18). DESIGN: Cross-sectional, intact-groups research design. Peak CG-CP moment arm measures how far the subject will tolerate the whole-body CG to deviate from the ground reaction force's CP; it represents dynamic balance control. Screening test cutoff points at 16 to 18 cm peak CG-CP moment arm predicted group membership. RESULTS: The magnitude of peak CG-CP moment arm was significantly greater in HE than in DE and VH subjects (p<.01) and was not different between the DE and VH groups. The peak CG-CP moment arm occurred at the end of single stance phase in all groups. As a screening test, the peak moment arm has greater than 50% sensitivity and specificity to discriminate the HE group from the DE and VH groups with peak CG-CP moment arm cutoff points between 16 and 18 cm. CONCLUSIONS: Examining dynamic balance through the use of the CG-CP moment arm during single stance in gait initiation discriminates between nondisabled and disabled older persons and warrants further investigation as a potential tool to identify people with balance dysfunction.
NASA Discipline Neuroscience↗
Diamondlike carbon - A bibliography of published papers and reports
A bibliography of references on investigations of diamond-like carbon (DLC) materials is presented. The list was developed over several years of active research and by computerized searches for the following keywords: diamondlike carbon, diamond-like carbon, hard carbon, i-carbon, A-C:H, and amorphous hydrogenated carbon. The bibliography has 241 citations, begins in 1956, includes an author index and was last updated in August 1985.
Woollam, J. A.↗
Implementation on a nonlinear concrete cracking algorithm in NASTRAN
A computer code for the analysis of reinforced concrete structures was developed using NASTRAN as a basis. Nonlinear iteration procedures were developed for obtaining solutions with a wide variety of loading sequences. A direct access file system was used to save results at each load step to restart within the solution module for further analysis. A multi-nested looping capability was implemented to control the iterations and change the loads. The basis for the analysis is a set of mutli-layer plate elements which allow local definition of materials and cracking properties.
Herting, D. N.↗
Scheduling algorithm for mission planning and logistics evaluation users' guide
The scheduling algorithm for mission planning and logistics evaluation (SAMPLE) program is a mission planning tool composed of three subsystems; the mission payloads subsystem (MPLS), which generates a list of feasible combinations from a payload model for a given calendar year; GREEDY, which is a heuristic model used to find the best traffic model; and the operations simulation and resources scheduling subsystem (OSARS), which determines traffic model feasibility for available resources. The SAMPLE provides the user with options to allow the execution of MPLS, GREEDY, GREEDY-OSARS, or MPLS-GREEDY-OSARS.
Chang, H.↗
Set covering algorithm, a subprogram of the scheduling algorithm for mission planning and logistic evaluation
A computer program using Lemke, Salkin and Spielberg's Set Covering Algorithm (SCA) to optimize a traffic model problem in the Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE) was documented. SCA forms a submodule of SAMPLE and provides for input and output, subroutines, and an interactive feature for performing the optimization and arranging the results in a readily understandable form for output.
Chang, H.↗
The determination of thermal diffusivities of thermal energy storage materials. I.
Thermal diffusivities of thermal energy storage materials from solid surface temperature measurements, discussing advantages of transient method
MATERIAL TESTING↗
Transient measurement of thermal diffusivity of refractory materials at high temperature
Transient measurement of thermal diffusivity of refractory materials at high temperature
THERMAL DIFFUSION↗