Engineering topics

Chan, Y. T.

Publications and source records attributed to Chan, Y. T..

4 records

NASA NTRS1995

Design of ETO Propulsion Turbine Using CFD Analyses

As one of the activities of the NASA/MSFC Turbine Technology Team, the present effort focused on using CFD in the design and analysis of high performance rocket engine pumps. A three-dimensional Navier-Stokes code was used for various turbine flow field calculations, with emphasis on the tip clearance flow and the associated losses. Both a baseline geometry and an advanced-concept geometry (with a mini-shroud at the blade tip) were studied at several tip clearances. The calculations performed under the present effort demonstrate that a state-of-the-art CFD code can be applied successfully to turbine design and the development of advanced hardware concepts.

Dejong, F. J.↗

NASA NTRS1993

Computer-controlled float zone crystal growth

A PC-based computer control system to automate a high-temperature float zone growth of titanium carbide is reported. The control strategy of the computer control system relies on the relations derived from a combination of empirical relations and results from detailed mathematical analysis of the physical transports of the entire float zone assembly. A system control computer program was written to establish real-time determination of the size of the molten zone from a thermal image, control parameters from established relationships, and collected processed data to achieve control objectives. We found that the developed computer control allows the growth process to be operated nearer the stability limit. Any slight variations in growth conditions can be corrected in time to avoid any instability growth, which otherwise cannot be adjusted via manual control.

Chan, Y. T.↗

NASA NTRS1992

Numerical simulations of inductive-heated float-zone growth

The present work provides an improved fluid flow and heat-transfer modeling of float-zone growth by introducing a RF heating model so that an ad hoc heating temperature profile is not necessary. Numerical simulations were carried out to study the high-temperature float-zone growth of titanium carbide single crystal. The numerical results showed that the thermocapillary convection occurring inside the molten zone tends to increase the convexity of the melt-crystal interface and decrease the maximum temperature of the molten zone, while the natural convection tends to reduce the stability of the molten zone by increasing its height. It was found that the increase of induced heating due to the increase of applied RF voltage is reduced by the decrease of zone diameter. Surface tension plays an important role in controlling the amount of induced heating. Finally, a comparison of the computed shape of the free surface with a digital image obtained during a growth run showed adequate agreement.

Chan, Y. T.↗

NASA NTRS1976

A sub-nanosecond CCD

A 32-cell silicon n-channel PCCD was fabricated and tested for charge transfer efficiency versus transfer time. A charge transfer time of 550 picoseconds with a 0.9998 transfer efficiency was obtained when operated in the uni-phase mode. These conditions correspond to an operating rate of 900 MHz when operated as an analog data or digital device.

Chan, Y. T.↗