Engineering Papers⌕ Search

Engineering topics

Chakrabarti, Supriya

Publications and source records attributed to Chakrabarti, Supriya.

34 records · Page 2

Development of a tool-set for simultaneous, multi-site observations of astronomical objects

A network of ground and space based telescopes can provide continuous observation of astronomical objects. In a 'Target of Opportunity' scenario triggered by the system, any telescope on the network may request supporting observations. We propose to develop a set of data collection and display tools to support these observations. We plan to demonstrate the usefulness of this tool set for simultaneous multi-site observations of astronomical targets. Possible candidates for the proposed demonstration include the Extreme Ultraviolet Explorer, International Ultraviolet Explorer, ALEXIS, and sounding rocket experiments. Ground based observations operated by the University of California, Berkeley; the Jet Propulsion Laboratory; and Fairborn Observatory, Mesa, Arizona will be used to demonstrate the proposed concept. Although the demonstration will involve astronomical investigations, these tools will be applicable to a large number of scientific disciplines. The software tools and systems developed as a result of our work will be made available to the scientific community.

Chakrabarti, Supriya↗

Gas ionization solar spectral monitor (GISSMO)

We are currently developing an instrument free from optical components to measure the full-disk solar spectrum in the extreme ultraviolet regime covering wavelengths from 75-500 A. The instrument, which will be launched aboard a NASA Black Brant sounding rocket in September 1992, consists of a windowless noble gas ionization cell followed by a toroidal electrostatic analyzer to spatially disperse photoelectrons as a function of their energies. A microchannel plate based position sensitive detector will be used to detect individual electrons, indirectly returning the solar EUV spectrum.

Vickers, James S.↗

A high resolution UV spectrograph for sounding rocket measurement of planetary emission line profiles

We have constructed a high resolution imaging spectrograph for use as a payload in a sounding rocket experiment. The spectrograph employs a modified Ebert-Fastie design using a LiF predispersing prism and a replica of the E1 echelle grating developed for the Space Telescope Imaging Spectrograph. The spectrograph is used as a focal plane instrument of the Jupiter Telescope, a Cassegrain telescope constructed exclusively for use as a sounding rocket payload. The telescope and spectrograph were launched from the White Sands Missile Range on May 4, 1991 to observe the H Ly-alpha line profile spatially resolved across the disk of Jupiter in the north-south and east-west directions, and to measure the H Ly-alpha emission line profile from interplanetary hydrogen associated with the local interstellar medium.

Harris, Walter↗

The Coronal Ultraviolet Berkeley Spectrometer (CUBS)

We describe an instrument package to remotely measure thermospheric, exospheric, and plasmaspheric structure and composition. This instrument was flown aboard the second test flight of the Black Brant XII sounding rocket on December 5, 1989, which attained an apogee of 1460 km. The experiment package consisted of a spectrophotometer to measure He I 584 A, O II 834 A, O I 989 A, hydrogen Lyman beta (1025 A), hydrogen Lyman alpha (1216 A), and O I 1304 A transitions, and a photometer to measure the He II 304 A emission. The optical design of the spectrophotometer was identical to that of the Berkeley Extreme Ultraviolet (EUV) Airglow Rocket Spectrometer payload, flown on September 30, 1988 aboard the maiden flight of the Black Brant XII rocket. We present the initial data analysis and describe directions we will go toward the completion of our study.

Bush, Brett C.↗

Airglow studies using an all-reflection interferometer for extreme ultraviolet spectroscopy (ARIES)

Ultrahigh resolution line studies can deepen insight into the excitation processes and structures of the upper atmosphere; attention is presently given to the possibility of a study of terrestrial atomic oxygen in the thermosphere through measurements of the O I 1304 A solar and terrestrial airglow emissions from a sounding rocket. These line profile studies of the airglow yield a relative contribution of the two main excitation mechanisms (photoelectron impact and solar-resonance scattering), as well as a verification of cross section and branching ratios.

Cotton, D. M.↗

The WIDe-angle GEocoronal Telescope (WIDGET)

We describe the WIDe-angle GEocoronal Telescope, or WIDGET. The telescope is designed to image the cold plasma constituent of the magnetosphere, the plasmasphere, by imaging the He II 304 A emission. It utilizes a spherical normal incidence f/2 mirror with a microchannel plate imaging detector positioned near the focal point of the mirror. The instrument has a 30-deg field of view with a .5-1-deg angular resolution. The mirror has a multilayer coating which, combined with an Al/C filter and the detector response, provides a peak sensitivity of approximately 0.5 ct/sec/Rayleigh/bin at 304 A with a bandpass of about 60 A. The instrument will be flown on a sounding rocket in the Fall of 1992 as a test of its capabilities. It can easily be adapted to different wavelengths (584, 834, and 1216 A) using suitable mirror coatings and filters. In this way, a series of WIDGETs could image different aspects of the inner magnetosphere simultaneously, thus providing a more unified picture of this complex region.

Cotton, Daniel↗

An 834 A reflective coating for magnetospheric imagery applications

We have designed a multiple-layer coating which selectively reflects 834 A radiation and suppresses 1025 A and 1216 A radiation. The structure of the coating material consists of a very thin (50-150 A) metal (nickel) layer, on top of a semitransparent dielectric material (magnesium fluoride), over an aluminum substrate. Three such coatings were produced at NASA Goddard Space Flight Center using an existing coating facility which is not optimized for thin coatings. In spite of such fabrication difficulties, we have obtained encouraging results.

Chakrabarti, Supriya↗

Prospect of space-based interferometry at EUV and soft X-ray wavelengths

We review the current capabilities of high-resolution, spectroscopic, space-borne instrumentation available for both solar and stellar observations in the EUV and soft X-ray wavelength regimes, and describe the basic design of a compact, all-reflection interferometer based on the spatial heterodyne technique; this is capable of producing a resolving power (lambda/Delta-lambda) of about 20,000 in the 100-200 A region using presently available multilayer optical components. Such an instrument can be readily constructed with existing technology. Due to its small size and lack of moving parts, it is ideally suited to spaceborne applications. Based on best estimates of the efficiency of this instrument at soft X-ray wavelengths, we review the possible use of this high-resolution interferometer in obtaining high-resolution full-disk spectroscopy of the sun. We also discuss its possible use for observations of diffuse sources such as the EUV interstellar background radiation.

Welsh, Barry Y.↗

High resolution, two-dimensional imaging, microchannel plate detector for use on a sounding rocket experiment

We discuss a high resolution microchannel plate (MCP) imaging detector to be used in measurements of Doppler-shifted hydrogen Lyman-alpha line emission from Jupiter and the interplanetary medium. The detector is housed in a vacuum-tight stainless steel cylinder (to provide shielding from magnetic fields) with a MgF2 window. Operating at nominal voltage, the four plate configuration provides a gain of 1.2 x 10 exp 7 electrons per incident photon. The wedge-and-strip anode has two-dimensional imaging capabilities, with a resolution of 40 microns FWHM over a one centimeter diameter area. The detector has a high quantum efficiency while retaining a low background rate. A KBr photocathode is used to enhance the quantum efficiency of the bare MCPs to a value of 35 percent at Lyman-alpha.

Bush, Brett C.↗

Rigid lightweight optical bench for a spaceborne FUV spatial heterodyne interferometer

Requirements for spaceflight optical instruments usually dictate that for the structures be rigid, lightweight, and thermally stable. In addition, for interferometric far ultraviolet (FUV) spectrometers, the requirements for torsional deflection are more severe than with conventional spectrometers. To meet the challenge for rigid and lightweight optical instruments, this paper explores the design of a high-stiffness structure for the support of an FUV spatial heterodyne interferometer where the torsional deflection of the instrument is on the order of 10 arc seconds. The structure is based on use of a thin, hollow section beam with weight-relieving between optical elements. The design also uses a modular and self-contained positioning mechanism that is removed after final optical alignment. Several specific material properties are presented as criteria for material selection. The parameters which affect the particular design requirements are identified with respect to the desired material properties and physical design features. Although large thin sections are susceptible to thermal gradients, this could be minimized by a trade-off for weight, where adequate margin exists. This paper describes the preliminary design for the structure and presents an analysis to verify compliance with the requirements.

Tom, James L.↗

Modular removable precision mechanism for alignment of an FUV spatial heterodyne interferometer

Spaceflight optical instruments have two conflicting requirements. They need to be both rigid and lightweight. In addition, for interferometric far ultraviolet spectrometers, the requirements for precision positioning are more severe than for conventional spectrometers. To meet the challenge of lightweight optical instruments, a modular adjustment mechanism was developed to position two orthogonal axes of a universal three-axis gimbal support system with a positioning accuracy on the order of 10 arc seconds. The mechanism was designed as a self-contained assembly which can be removed after final alignment of a spacebound optical instrument to reduce its in-flight mass. To demonstrate the concept, a number of these assemblies were made and mounted on two of the positioning axes of a far ultraviolet spatial heterodyne interferometer. A shaft clamp was used on each positioning axis to retain the adjusted position. This paper describes the design of the mechanism and presents optical test results.

Tom, James L.↗

V-groove diffraction grating for use in an FUV spatial heterodyne interferometer

A need has arisen for efficient, blazed, symmetric gratings for use as beam splitters in far and extreme ultraviolet interferometers. In particular, the development of an all-reflection, far ultraviolet spatial heterodyne interferometer can benefit tremendously from such a grating. To fulfill this need, we have manufactured a mechanically ruled grating with a V-groove profile blazed for H Lyman-alpha at 1216 A. We present the grating performance at Lyman-alpha in the context of its application to the spatial heterodyne interferometer.

Cotton, Daniel M.↗

Instrument design and test results of the new all-reflection spatial heterodyne spectrometer

An all-reflection spatial heterodyne spectrometer (SHS) has been recently developed. The advantages over conventional high-resolution grating spectrometers are that the SHS requires no mechanical scanning, a self-compensating optical design permits easy alignment, and it is much smaller than other spectrometers of comparable resolution. Since all beam-splits and recombinations occur by reflection off of a diffraction grating, the interferometer is capable of operating well into the extreme ultraviolet (EUV) and possibly into the soft X-ray region. A description of the design and the characteristics of the instrument is presented. Also, test results, including sample interferograms as well as their Fourier-transformed spectra, at both visible and UV wavelengths are shown. Finally, we report on future developments and possible applications.

Bush, Brett C.↗

Calibration of the Berkeley EUV Airglow Rocket Spectrometer

The Berkeley Extreme-ultraviolet Airglow Rocket Spectrometer (BEARS), a multiinstrument sounding rocket payload, made comprehensive measurements of the earth's dayglow. The primary instruments consisted of two near-normal Rowland mount spectrometers: one channel to measure several atomic oxygen features at high spectral resolution (about 1.5 A) in the band passes 980-1040 and 1300-1360 A, and the other to measure EUV dayglow and the solar EUV simultaneously in a much broader bandpass (250-1150 A) at moderate resolution (about 10 A). The payload also included a hydrogen Lyman-alpha photometer to monitor the solar irradiance and goecoronal emissions. The instrument was calibrated at the EUV calibration facility at the University of California at Berkeley, and was subsequently launched successfully on September 30, 1988 aboard a four-stage experimental sounding rocket, Black Brant XII flight 12.041 WT. The calibration procedure and resulting data are presented.

Cotton, Daniel M.↗

Astronomical data analysis from remote sites

The development of telescience methodologies for teledesign, teleoperation, and teleanalysis, and the possible verification of these concepts using the Extreme UV Explorer (EUVE) are discussed. The EUVE is a satellite payload scheduled for launch in 1991. The use of the Browse data base system (Star et al., 1987) is reviewed and its suitability for astronomy applications is evaluated. The possibility of adopting the Browse system for EUVE data analysis is considered.

Chakrabarti, Supriya↗

Telescience - Concepts and contributions to the Extreme Ultraviolet Explorer mission

It is shown how the contradictory goals of low-cost and fast data turnaround characterizing the Extreme Ultraviolet Explorer (EUVE) mission can be achieved via the early use of telescience style transparent tools and simulations. The use of transparent tools reduces the parallel development of capability while ensuring that valuable prelaunch experience is not lost in the operations phase. Efforts made to upgrade the 'EUVE electronics' simulator are described.

Marchant, Will↗