Engineering Papers⌕ Search

Engineering topics

Cassibry, Jason

Publications and source records attributed to Cassibry, Jason.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Hybrid Fuel Coupling in a Pulsed Z-Pinch Rocket Engine

The work presented here sought to explore a portion of the parameter space of a hybrid nuclear fuel in regards to ignition and burn by analyzing the effect of initial geometry and thermodynamic conditions. The authors performed 0D power balance and 1D burn wave calculations to determine temperature progression and energy production for defined initial conditions. Geometries examined are representative of concept fuels for a Pulsed Fission-Fusion (PuFF) engine. This work focuses on lithium deuteride and uranium 235 for the fuel since these are seen as leading candidates for PuFF. Presented below is a power balance illustrating a reduction in the energy and density required to breakeven of hybrid fuels in comparison with fusion fuels. Also the impact of fusion and fissile fuel quantities upon initial energies is presented. One can see that the initial energy required to breakeven in a hybrid cylindrical nuclear fuel decreases with decreasing fissile liner thickness, decreasing fusion fuel core radius, and increasing compression ratio of the fusion fuel.

Taylor, Brian↗
NASA NTRS2019

Hybrid Fuel Coupling in a Pulsed Z-Pinch Rocket Engine

The work presented here sought to explore a portion of the parameter space of a hybrid nuclear fuel in regards to ignition and burn by analyzing the effect of initial geometry and thermodynamic conditions. The authors performed 0D power balance and 1D burn wave calculations to determine temperature progression and energy production for defined initial conditions. Geometries examined are representative of concept fuels for a Pulsed Fission-Fusion (PuFF) engine. This work focuses on lithium deuteride and uranium 235 for the fuel since these are seen as leading candidates for PuFF. Presented below is a power balance illustrating a reduction in the energy and density required to breakeven of hybrid fuels in comparison with fusion fuels. Also the impact of fusion and fissile fuel quantities upon initial energies is presented. One can see that the initial energy required to breakeven in a hybrid cylindrical nuclear fuel decreases with decreasing fissile liner thickness, decreasing fusion fuel core radius, and increasing compression ratio of the fusion fuel.

Taylor, Brian↗
NASA NTRS2018

Pulsed Fission-Fusion (PuFF)

In September 2013 the NASA Innovative Advanced Concept (NIAC) organization awarded a phase I contract to the PuFF team. Our phase 1 proposal discussed a pulsed fission-fusion propulsion system that injected gaseous deuterium (D) and tritium (T) as a mixture in a column, surrounded concentrically by gaseous uranium fluoride (UF6) and then an outer shell of liquid lithium. A high power current would flow down the liquid lithium and the resulting Lorentz force would compress the column by roughly a factor of 10. The compressed column would reach criticality and a combination of fission and fusion reactions would occur. The fission reactions would further energize the fusion center, and the fusion reactions would generate neutrons that promote more complete burnup of the fission fuel. The lithium liner provides some help as a neutron reflector but also acts as a propulsive medium, being converted to plasma which is then expanded against a magnetic nozzle for thrust. The expansion of the (primarily) lithium plasma against the nozzle's magnetic field inducts a current that is used to charge the system for the next pulse. Our concept also included secondary injection of a Field Reversed Configuration (FRC) plasmoid that would provide a secondary compression direction, axially against the column, and push the column away from the injection manifold, increasing the manifold's survivability.Our phase 1 proposal included modeling the above process first under steady state assumptions and second under a time variant integration. We proposed including these results into a Mars concept vehicle and finally proposing promising conditions to be evaluated experimentally in Phase II. In phase I we quickly realized that we needed to modify our approach. Our steady state work was completed as proposed, and the results indicated that one, a two stage compression system was not needed and two, that we wanted to move away from UF6. The steady state model shows much more margin than expected, to the point that we may well reach breakeven with the Charger – 1 facility, a 572 kJ Marx bank currently under refurbishment at UAH. Additionally we found that using gaseous D-T and UF6, provided a relatively simple prospect of using a pulsed injector, made reaching criticality more difficult. The introduction of large amounts of fluorine meant a radiative sink, sapping power from the fusion plasma and was harder to handle. Therefore we moved to a solid uranium target that held D-T under pressure. In so doing we could move our target closer to criticality and remove any material that did not sustain the reaction.

Fusion↗
NASA NTRS2018

Preliminary Analysis of the Gradient Field Imploding Liner Fusion Propulsion Concept

NIAC Phase I study takes advantage of ground-based research in Magnetoinertial Fusion (MIF). Pulsed current in an external coil generates strong axial magnetic field, induces azimuthal current in target liner. Radial j (sub theta) B (sub z) Lorentz force implodes the liner to compress the target fuel. At maximum compression, pressure is balanced between the stagnating liner material, external magnetic field, trapped internal magnetic field, and fuel pressure. Multiple approaches: Z-pinch, theta-pinch, Liner-driven FRC, etc. Energy storage, resistive coil, pulse repetition all present challenges.

Fusion; Propulsion; Exploration↗
NASA NTRS2018

Instability and Target Design in a Z-Pinch Driven Pulsed Fission / Fusion Engine

Advanced forms of propulsion are required to drastically improve upon the limits of existing technology and enable deep space exploration. Nuclear reactors, both fission and fusion, have great potential as systems with high energy density for spacecraft propulsion. There are a variety of nuclear propulsion concepts that have been proposed over the last several decades. Some of these rely on the confinement of plasmas by both magnetic and inertial means. When discussing the plasma confinement one must consider the stability of the system. The conditions of the plasma dictate the burn rate of the nuclear fuel; therefore, the plasma must maintain a minimum set of conditions in order to achieve an adequate burn. Instabilities limit plasma confinement through growing fluctuations in density and pressure. This results in turbulent mixing and loss of confinement. Thus it is desirable to find ways of managing the impact of instabilities that arise in order for a sufficient burn of the fuel such that surplus energy can be converted into a propulsive force. Note that the same instabilities plague the confinement of plasmas for terrestrial power generation. Over the last several years there has been research relating to the development of a Pulsed Fission-Fusion Engine (PuFF) conducted by the authors and others at their respective institutions. The propulsion system concept centers on the use of a z-pinch to compress a plasma in order to induce nuclear reactions. The plasma along with the additional energy released by the fission and fusion processes is expanded with a magnetic nozzle to produce thrust. The concept, if developed, is expected to have an improvement in specific impulse of several orders of magnitude in comparison with chemical propulsion systems. The z-pinch has been explored in the past as a method to confine a plasma via magnetic confinement fusion (MCF) for power generation. It suffers; however, from instabilities that so far have prevented break even conditions.

Taylor, Brian↗
NASA NTRS2017

Charger 1: A New Facility for Z-Pinch Research

Charger 1 is a multipurpose pulsed power laboratory located on Redstone Arsenal, with a focus on fusion propulsion relevant experiments involving testing z-pinch diodes, pulsed magnetic nozzle and other related physics experiments. UAH and its team of pulsed power researchers are investigating ways to increase and optimize fusion production from Charger 1. Currently the team has reached high-power testing. Due to the unique safety issues related to high power operations the UAH/MSFC team has slowed repair efforts to develop safety and operations protocols. The facility is expected to be operational by the time DZP 2017 convenes. Charger 1 began life as the Decade Module 2, an experimental prototype built to prove the Decade Quad pinch configuration. The system was donated to UAH by the Defense Threat Reduction Agency (DRTA) in 2012. For the past 5 years a UAH/MSFC/Boeing team has worked to refurbish, assemble and test the system. With completion of high power testing in summer 2017 Charger 1 will become operational for experimentation. Charger 1 utilizes a Marx Bank of 72 100-kV capacitors that are charged in parallel and discharged in series. The Marx output is compressed to a pulse width of approximately 200 ns via a pulse forming network of 32 coaxial stainless steel tubes using water as a dielectric. After pulse compression a set of SF6 switches are triggered, allowing the wave front to propagate through the output line to the load. Charger 1 is capable of storing 572-kJ of energy and time compressing discharge to less than 250 ns discharge time producing a discharge of about 1 TW of discharge with 1 MV and 1 MA peak voltage and current, respectively. This capability will be used to study energy yield scaling and physics from solid density target as applied to advanced propulsion research.

Taylor, Brian↗
NASA NTRS2017

Linear Transformer Drivers for Z-pinch Based Propulsion

The MSFC/UAH team has been developing of a novel power management and distribution system called a Linear Transformer Driver (LTD). LTD's hold the promise of dramatically reducing the required mass to drive a z-pinch by replacing the capacitor banks which constitute half the mass of the entire system. The MSFC?UAH tea, is developing this technology in hope of integrating it with the Pulsed Fission Fusion (PuFF) propulsion concept. High-Voltage pulsed power systems used for Z-Pinch experimentation have in the past largely been based on Marx Generators. Marx generators deliver the voltage and current required for the Z-Pinch, but suffer from two significant drawbacks when applied to a flight system: they are very massive, consisting of high-voltage capacitor banks insulated in oil-filled tanks and they do not lend themselves to rapid pulsing. The overall goal of Phase 2 is to demonstrate the construction of a higher voltage stack from a number of cavities each of the design proven in Phase 1 and to characterize and understand the techniques for designing the stack. The overall goal of Phase 3 is to demonstrate the feasibility of constructing a higher energy cavity from a number of smaller LTD stacks, to characterize and understand the way in which the constituent stacks combine, and to extend this demonstration LTD to serve as the basis for a 64 kJ pulse generator for Z-Pinch experiments.

Adams, Robert↗
NASA NTRS2017

The Pulsed Fission-Fusion (PUFF) Concept for Deep Space Exploration and Terrestrial Power Generation

This team is exploring a modified Z-pinch geometry as a propulsion system, imploding a liner of liquid lithium onto a pellet containing both fission and fusion fuel. The plasma resulting from the fission and fusion burn expands against a magnetic nozzle, for propulsion, or a magnetic confinement system, for terrestrial power generation. There is considerable synergy in the concept; the lithium acts as a temporary virtual cathode, and adds reaction mass for propulsion. Further, the lithium acts as a radiation shield against generated neutrons and gamma rays. Finally, the density profile of the column can be tailored using the lithium sheath. Recent theoretical and experimental developments (e.g. tailored density profile in the fuel injection, shear stabilization, and magnetic shear stabilization) have had great success in mitigating instabilities that have plagued previous fusion efforts. This paper will review the work in evaluating the pellet sizes and z-pinch conditions for optimal PuFF propulsion. Trades of pellet size and composition with z-pinch power levels and conditions for the tamper and lithium implosion are evaluated. Current models, both theoretical and computational, show that a z-pinch can ignite a small (~1 cm radius) fission-fusion target with significant yield. Comparison is made between pure fission and boosted fission targets. Performance is shown for crewed spacecraft for high speed Mars round trip missions and near interstellar robotic missions. The PuFF concept also offers a solution for terrestrial power production. PuFF can, with recycling of the effluent, achieve near 100% burnup of fission fuel, providing a very attractive power source with minimal waste. The small size of PuFF relative to today's plants enables a more distributed power network and less exposure to natural or man-made disruptions.

Adams, Robert↗
NASA NTRS2017

Gradient Field Imploding Liner Fusion Propulsion System

Magneto-inertial fusion concepts often use a pulsed high current discharge in a cylindrical coil to generate a rapidly changing axial magnetic field, inducing a counter-propagating current in the conducting outer liner of a centrally aligned cylindrical fusion target. The Lorentz force arising from the axial field and azimuthal liner current rapidly implodes the target radially inward, compressing the fuel to reach fusion conditions.

Exploration↗
NASA NTRS2014

Developing the Pulsed Fission-Fusion (PuFF) Engine

In September 2013 the NASA Innovative Advanced Concept (NIAC) organization awarded a phase I contract to the PuFF team. Our phase 1 proposal researched a pulsed fission-fusion propulsion system that compressed a target of deuterium (D) and tritium (T) as a mixture in a column, surrounded concentrically by Uranium. The target is surrounded by liquid lithium. A high power current would flow down the liquid lithium and the resulting Lorentz force would compress the column by roughly a factor of 10. The compressed column would reach criticality and a combination of fission and fusion reactions would occur. Our Phase I results, summarized herein, review our estimates of engine and vehicle performance, our work to date to model the fission-fusion reaction, and our initial efforts in experimental analysis.

Adams, Robert B.↗