Engineering Papers⌕ Search

Engineering topics

Carter, Sue

Publications and source records attributed to Carter, Sue.

Probing the electronic structure of graphene near and far from the Fermi level via planar tunneling spectroscopy

Scanning tunneling spectroscopy (STS) has yielded significant insight into the electronic structure of graphene and other two-dimensional (2D) materials. STS directly measures a fundamental and directly calculable quantity: single particle density of states (SPDOS). Due to experimental setup limitations, however, STS has been unable to explore 2D materials in ultrahigh magnetic fields where electron-electron interactions can drastically change the SPDOS. Recent developments in the assembly of heterostructures composed of graphene and hexagonal boron nitride have enabled a device-based alternative to potentially overcome these roadblocks. Thus far, however, these nascent efforts are incomplete in analyzing and understanding tunneling spectra and have yet to explore graphene at high magnetic fields. Here, we report an experiment at magnetic fields up to 18 T, which uses graphene tunneling field effect transistors (TFETs) to establish a clear benchmark for the measurement and analysis of graphene planar tunneling spectroscopy. We acquire gate tunable tunneling spectra of graphene and then use these data and electrostatic arguments to develop a systematic analysis scheme. This analysis reveals that TFET devices directly probe electronic structure features near and far from the Fermi level. In particular, our study yields identification of the Dirac point and numerous Landau levels as they fill and empty with charge via the application of a gate voltage. Our work demonstrates that TFET devices are a viable platform for directly probing the electronic structure of graphene and other 2D materials in high magnetic fields, where exotic electronic states emerge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of temperature on light induced degradation in methylammonium lead iodide perovskite thin films and solar cells

Here in this study we investigate the light and heat-induced degradation of methylammonium lead iodide (MAPbI 3 ) perovskite films in an inert atmosphere to exclude the effect of oxygen and humidity. Films aged under solar intensities started to degrade above 75 °C, while films in the dark degraded at 95 °C. To investigate the temperature-induced degradation mechanism, spectroscopic techniques such as Ultraviolet-Visible (UV–Vis) absorption spectroscopy, X-Ray Diffraction (XRD), Extended X-ray Absorption Fine Structure (EXAFS), and Fourier Transform Infrared (FT-IR) were used. Results show that the films aged under light at 75 °C degraded to a mixture of PbI 2 and metallic Pb. In contrast, films aged thermally in the dark, or with light and oxygen, degraded to PbI 2 only. MAPbI 3 solar cells were aged to show the effect of the metallic lead on the charge transfer mechanism

14 SOLAR ENERGY↗

Mechanisms for light induced degradation in MAPbI 3 perovskite thin films and solar cells

Organometal halide perovskites are highly promising materials for photovoltaic applications, yet their rapid degradation remains a significant challenge. Here, the light-induced structural degradation mechanism of methylammonium lead iodide (MAPbI 3 ) perovskite films and devices is studied in low humidity environment using X-Ray Diffraction, Ultraviolet-Visible (UV-Vis) absorption spectroscopy, Extended X-ray Absorption Fine Structure spectroscopy, Fourier Transform Infrared spectroscopy, and device measurements. Under dry conditions, the perovskite film degrades only in the presence of both light and oxygen, which together induce the formation of halide anions through donation of electrons to the surrounding oxygen. The halide anions generate free radicals that deprotonate the methylammonium cation and form the highly volatile CH 3 NH 2 molecules that escape and leave pure PbI 2 behind. The device findings show that changes in the local structure at the TiO 2 mesoporous layer occur with light, even in the absence of oxygen, and yet such changes can be prevented by the application of UV blocking layer on the cells. Our results indicate that the stability of mp-TiO 2 -MAPbI 3 photovoltaics can be dramatically improved with effective encapsulation that protects the device from UV light, oxygen, and moisture.

25 ENERGY STORAGE↗

Structure in multilayer films of zinc sulfide and copper sulfide via atomic layer deposition

Multilayer film stacks of ZnS and Cu{sub x}S (x ∼ 2) were made via atomic layer deposition. The precursors were bis(2,2,6,6-tetramethyl-3,5-heptanedionato)zinc, bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper, and H{sub 2}S generated in situ for sulfur. Samples were deposited at 200 °C, in layers ranging from approximately 2 to 20 nm thick, based on binary growth rates. The properties of the film stacks were studied with atomic force microscopy, ultraviolet–visible spectroscopy, and extended x-ray absorption fine structure. The results demonstrate that the structure of films with the thinnest layers is dominated by Cu{sub x}S, whereas in the thicker films, the structure is determined by whichever material is first deposited. This can be attributed to the crystal structure mismatch of ZnS and Cu{sub x}S.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition of zinc sulfide with Zn(TMHD){sub 2}

The atomic layer deposition (ALD) of ZnS films with Zn(TMHD){sub 2} and in situ generated H{sub 2}S as precursors was investigated, over a temperature range of 150-375 Degree-Sign C. ALD behavior was confirmed by investigation of growth behavior and saturation curves. The properties of the films were studied with atomic force microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy, ultraviolet-visible-infrared spectroscopy, and extended x-ray absorption fine structure. The results demonstrate a film that can penetrate a porous matrix, with a local Zn structure of bulk ZnS, and a band gap between 3.5 and 3.6 eV. The ZnS film was used as a buffer layer in nanostructured PbS quantum dot solar cell devices.

36 MATERIALS SCIENCE↗

Nanoparticle Solar Cell Final Technical Report

The purpose of this work was to demonstrate all-inorganic nanoparticle-based solar cells with photovoltaic performance extending into the near-IR region of the solar spectrum as a pathway towards improving power conversion efficiencies. The field of all-inorganic nanoparticle-based solar cells is very new, with only one literature publication in the prior to our project. Very little is understood regarding how these devices function. Inorganic solar cells with IR performance have previously been fabricated using traditional methods such as physical vapor deposition and sputtering, and solution-processed devices utilizing IR-absorbing organic polymers have been investigated. The solution-based deposition of nanoparticles offers the potential of a low-cost manufacturing process combined with the ability to tune the chemical synthesis and material properties to control the device properties. This work, in collaboration with the Sue Carter research group at the University of California, Santa Cruz, has greatly expanded the knowledge base in this field, exploring multiple material systems and several key areas of device physics including temperature, bandgap and electrode device behavior dependence, material morphological behavior, and the role of buffer layers. One publication has been accepted to Solar Energy Materials and Solar Cells pending minor revision and another two papers are being written now. While device performance in the near-IR did not reach the level anticipated at the beginning of this grant, we did observe one of the highest near-IR efficiencies for a nanoparticle-based solar cell device to date. We also identified several key parameters of importance for improving both near-IR performance and nanoparticle solar cells in general, and demonstrated multiple pathways which showed promise for future commercialization with further research.

14 SOLAR ENERGY↗