Engineering topics
Carson, Robert
Publications and source records attributed to Carson, Robert.
Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference
The Additive Manufacturing Benchmark Test Series (AM Bench) provides rigorous measurement data for validating additive manufacturing (AM) simulations for a broad range of AM technologies and material systems. AM Bench includes extensive in situ and ex situ measurements, simulation challenges for the AM modeling community, and a corresponding conference series. In 2022, the second round of AM Bench measurements, challenge problems, and conference were completed, focusing primarily upon laser powder bed fusion (LPBF) processing of metals, and both material extrusion processing and vat photopolymerization of polymers. In all, more than 100 people from 10 National Institute of Standards and Technology (NIST) divisions and 21 additional organizations were directly involved in the AM Bench 2022 measurements, data management, and conference organization. The international AM community submitted 138 sets of blind modeling simulations for comparison with the in situ and ex situ measurements, up from 46 submissions for the first round of AM Bench in 2018. Analysis of these submissions provides valuable insight into current AM modeling capabilities. The AM Bench data are permanently archived and freely accessible online. The AM Bench conference also hosted an embedded workshop on qualification and certification of AM materials and components.
MAGMA: Enabling exascale performance with accelerated BLAS and LAPACK for diverse GPU architectures
MAGMA (Matrix Algebra for GPU and Multicore Architectures) is a pivotal open-source library in the landscape of GPU-enabled dense and sparse linear algebra computations. With a repertoire of approximately 750 numerical routines across four precisions, MAGMA is deeply ingrained in the DOE software stack, playing a crucial role in high-performance computing. Notable projects such as ExaConstit, HiOP, MARBL, and STRUMPACK, among others, directly harness the capabilities of MAGMA. In addition, the MAGMA development team has been acknowledged multiple times for contributing to the vendors’ numerical software stacks. Looking back over the time of the Exascale Computing Project (ECP), we highlight how MAGMA has adapted to recent changes in modern HPC systems, especially the growing gap between CPU and GPU compute capabilities, as well as the introduction of low precision arithmetic in modern GPUs. We also describe MAGMA’s direct impact on several ECP projects. Maintaining portable performance across NVIDIA and AMD GPUs, and with current efforts toward supporting Intel GPUs, MAGMA ensures its adaptability and relevance in the ever-evolving landscape of GPU architectures.
Uncertainty Quantification of Metal Additive Manufacturing Processing Conditions Through the use of Exascale Computing
Metal additive manufacturing (AM) is a disruptive manufacturing technology that opens the design space for parts outside those possible from traditional manufacturing methods. In order to accelerate industry and R&D needs to certify AM parts, the Exascale Additive Manufacturing project (ExaAM) has developed a suite of exascale-ready computational tools to model the process-to-structure-to-properties (PSP) relationship for additively manufactured metal components. One such tool is an uncertainty quantification (UQ) pipeline to quantify the effect that uncertainty in processing conditions has on local mechanical responses. We present an overview of this pipeline and its required simulation and workflow codes. Using the Oak Ridge National Laboratory’s (ORNL) exascale computer, Frontier, we utilize this pipeline to cross multiple length and time scales to predict the local mechanical response of a location within a complex AM bridge part, AMB2018-01 produced by the National Institute of Standards and Technology (NIST) as part of their 2018 AM-Bench test series. Our results are then compared to experimental mechanical tests of parts from the NIST build to quantify the error in the ExaAM UQ workflow.
Novel Approaches Toward Scalable Composable Workflows in Hyper-Heterogeneous Computing Environments
The annual Workshop on Workflows in Support of Large-Scale Science (WORKS) is a premier venue for the scientific workflow community to present the latest advances in research and development on the many facets of scientific workflows throughout their life-cycle. The Lightning Talks at WORKS focus on describing a novel tool, scientific workflow, or concept, which are work-in-progress and address emerging technologies and frameworks to foster discussion in the community. This paper summarizes the lightning talks at the 2023 edition of WORKS, covering five topics: leveraging large language models to build and execute workflows; developing a common workflow scheduler interface; scaling uncertainty workflow applications on exascale computing systems; evaluating a transcriptomics workflow for cloud vs. HPC systems; and best practices in migrating legacy workflows to workflow management systems.
Crystal plasticity model of BCC metals from large-scale MD simulations
Accurate crystal plasticity models that faithfully capture the behavior of single crystals under a wide range of loading conditions, such as loading direction, strain rate, and temperature, are still lacking. Here we introduce a novel approach in which a crystal plasticity (CP) model is informed directly from and calibrated to large-scale quantum-accurate MD simulations in which single crystal BCC Ta serves as a testbed material. By analyzing our large set of MD simulations several key insights are obtained leading us to modify constitutive assumptions in order to address deficiencies of existing CP models. Importantly, we observe that the standard notion of fixed slip systems – pairs of slip directions and slip planes – is inadequate for describing high-rate plasticity in BCC tantalum at room temperature. Instead, pencil glide defined as dislocation motion in the maximum resolved shear stress planes (MRSSP) of each Burgers vector is fully consistent with our MD simulation data while providing significant simplifications of the constitutive relations. Herein, our resulting new CP model closely matches the behavior of single crystals observed in high-rate MD simulations while being fully consistent with lower rate experimental results.
Uncertainty quantification for computational modelling of laser powder bed fusion
Explore the source record for details and available documents.
Understanding Uncertainty in Microstructure Evolution and Constitutive Properties in Additive Process Modeling
Coupled process–microstructure–property modeling, and understanding the sources of uncertainty and their propagation toward error in part property prediction, are key steps toward full utilization of additive manufacturing (AM) for predictable quality part development. The OpenFOAM model for process conditions, the ExaCA model for as-solidified grain structure, and the ExaConstit model for constitutive mechanical properties are used as part of the ExaAM modeling framework to examine a few of the various sources of uncertainty in the modeling workflow. In addition to “random” uncertainty (due to random number generation in the orientations and locations of grains present), the heterogeneous nucleation density N 0 and the mean substrate grain spacing S 0 are varied to examine their impact of grain area development as a function of build height in the simulated microstructure. While mean grain area after 1 mm of build is found to be sensitive to N 0 and S 0 , particularly at small N 0 and large S 0 (despite some convergence toward similar values), the resulting grain shapes and overall textures develop in a reasonably similar manner. As a result of these similar textures, ExaConstit simulation using ExaCA representative volume elements (RVEs) from various permutations of N 0 , S 0 , and location within the build resulted in similar yield stress, stress–strain curve shape, and stress triaxiality distributions. It is concluded that for this particular material and scan pattern, 15 layers is sufficient for ExaCA texture and ExaConstit predicted properties to become relatively independent of additional layer simulation, provided that reasonable estimates for N 0 and S 0 are used. However, additional layers of ExaCA will need to be run to obtain mean grain areas independent of build height and baseplate structure.
ExaAM: Metal additive manufacturing simulation at the fidelity of the microstructure
Additive manufacturing (AM), or 3D printing, of metals is transforming the fabrication of components, in part by dramatically expanding the design space, allowing optimization of shape and topology. However, although the physical processes involved in AM are similar to those of welding, a field with decades of experimental, modeling, simulation, and characterization experience, qualification of AM parts remains a challenge. The availability of exascale computational systems, particularly when combined with data-driven approaches such as machine learning, enables topology and shape optimization as well as accelerated qualification by providing process-aware, locally accurate microstructure and mechanical property models. We describe the physics components comprising the Exascale Additive Manufacturing simulation environment and report progress using highly resolved melt pool simulations to inform part-scale finite element thermomechanics simulations, drive microstructure evolution, and determine constitutive mechanical property relationships based on those microstructures using polycrystal plasticity. We report on implementation of these components for exascale computing architectures, as well as the multi-stage simulation workflow that provides a unique high-fidelity model of process–structure–property relationships for AM parts. In addition, we discuss verification and validation through collaboration with efforts such as AM-Bench, a set of benchmark test problems under development by a team led by the National Institute of Standards and Technology.
GPU algorithms for Efficient Exascale Discretizations
In this paper we describe the research and development activities in the Center for Efficient Exascale Discretization within the US Exascale Computing Project, targeting state-of-the-art high-order finite-element algorithms for high-order applications on GPU-accelerated platforms. Furthermore, we discuss the GPU developments in several components of the CEED software stack, including the libCEED, MAGMA, MFEM, libParanumal, and Nek projects. We report performance and capability improvements in several CEED-enabled applications on both NVIDIA and AMD GPU systems.
Enhancements supporting IC usage of PEM libraries on next-gen platforms
This milestone reports on the culmination of several years of effort by multiple PEM support software development teams to provide capabilities for use in LLNL-developed integrated codes on next-gen ASC platforms, including GPU support. We will provide a survey of relevant Application Program Interfaces (API) that are required to support LLNL IC code capability on relevant architectures, with a focus on Sierra and El Capitan. We will identify and summarize all dependencies between PEM supported libraries and IC supported physics codes. We will provide an assessment of algorithmic improvements that have been deployed, as well as future developments that are required to complete the GPU porting efforts. This assessment will include a description of programming models adopted by each of the PEM projects, distinct algorithmic challenges for each of the capabilities, and information about sharing GPU memory between the APIs and host codes. We will develop targeted test problems to assess computational performance. Finally, this milestone will result in identification of gaps in our effort to assist the LLNL ASC program in prioritization of effort for porting software to El Capitan.
CEED-MS34: Improve performance and capabilities of CEED-enabled ECP applications on Summit/Sierra. Exascale Computing Project Milestone Report
The main goal of this milestone was to help CEED-enabled ECP applications, including ExaSMR, MARBL, ExaWind and ExaAM, to improve their performance and capabilities on GPU systems like Summit and Lassen/Sierra. In addition, the CEED team also worked to: add and improve support for additional hardware and programming models in the CEED software components; release the next version of the CEED software stack, CEED-3.0; and demonstrate performance of libParanumal kernels in libCEED, Nek and MFEM. These additional tasks contributed directly to the main CEED-MS34 goal and will also play an important role in CEED’s future milestones.
Deformation heterogeneity and intragrain lattice misorientation in high strength contrast, dual-phase bridgmanite/periclase
A bridgmanite/periclase aggregate is investigated due to its prevalence in the Earth’s lower mantle and its importance for understanding geodynamic processes. In dual-phase polycrystalline aggregates, both strength contrast between phases and single crystal elastic and plastic anisotropy are known to influence the development of intragrain misorientation, and the evolution of crystallographic texture. In this study, full-field crystal plasticity simulations are performed with a finite element solution method, and applied to an aggregate of a mechanically strong orthorhombic phase with perovskite structure (bridgmanite, MgSiO 3 ), and a relatively weaker cubic phase (periclase, MgO). The relative strengths of the phases are parameterized to elucidate the effect that strength contrast has on texture evolution and single-phase simulations are performed for comparison. Altogether, results indicate that the relative strength between the two phases influences the development of plasticity, and the overall texture evolution. Results are discussed in light of trends related to the evolution of plasticity and misorientation in the aggregate, and their dependence on both the strength contrast between phases as well as the spatial distribution of grains and phases.
Formulation and characterization of a continuous crystal lattice orientation finite element method (LOFEM) and its application to dislocation fields
We report that since the 1950s, a large body of work has been published on connecting the curvature of a crystal lattice to geometrically necessary dislocations densities of a crystal lattice. Studying dislocation transmission through grains and across their boundaries requires the lattice curvature to be preserved. However, traditional crystal plasticity models and their numerical implementations do not formally preserve lattice curvature. In this paper, a continuous crystal lattice orientation finite element method (LOFEM) is proposed to rectify this impediment to the inclusion of dislocation-based constitutive models. The methodology is first presented, and then it is demonstrated for tension and compression deformations of a copper polycrystal. It is shown that under the same deformation histories, the lattice continuity constraint alters the evolving state in comparison to the traditional approach, including retarding the rate at which the crystallographic texture strengthens under monotonic deformation. Lastly, taking advantage of the finite element representation of the lattice orientation, the Nye tensor is computed on lattices misoriented by deformation and is subsequently used to compute evolving dislocation density distributions.
Characterizing heterogeneous intragranular deformations in polycrystalline solids using diffraction-based and mechanics-based metrics
Abstract not provided