Engineering topics
Publications and source records attributed to Carmichael, R. L..
Report describes transonic wind-tunnel tests of oblique, pivotable wing fitted to 0.087-scale model of F-8 airplane. Purpose of tests to study performance and stability characteristics. Conducted to determine whether placement of pivot at higher position above fuselage than previously results in less side force and yawing moment than observed in previous tests at low speeds.
Computational results are presented for three advanced configurations: the F-16A with wing tip missiles and under wing fuel tanks, the Oblique Wing Research Aircraft, and an Advanced Turboprop research model. These results were generated by the latest version of the TranAir full potential code, which solves for transonic flow over complex configurations. TranAir embeds a surface paneled geometry definition in a uniform rectangular flow field grid, thus avoiding the use of surface conforming grids, and decoupling the grid generation process from the definition of the configuration. The new version of the code locally refines the uniform grid near the surface of the geometry, based on local panel size and/or user input. This method distributes the flow field grid points much more efficiently than the previous version of the code, which solved for a grid that was uniform everywhere in the flow field. TranAir results are presented for the three configurations and are compared with wind tunnel data.
In order to produce networks for PANAIR, the user is greatly aided by a geometry package that will produce networks in the correct format. Although the best solution to this problem is the use of a suitably modified computer-aided design system, a collection of programs has been written to allow the user with a small-scale computer to generate networks that represent configurations of considerable generality. This repertoire of programs enables users of PANAIR to create networks with a minimum of effort and should increase the overall usefulness of the PANAIR program.
PAN AIR is a computer program that predicts subsonic or supersonic linear potential flow about arbitrary configurations. The code's versatility and generality afford numerous possibilities for modeling flow problems. Although this generality provides great flexibility, it also means that studies are required to establish the dos and don'ts of modeling. The purpose of this paper is to describe and evaluate a variety of methods for modeling flows with PAN AIR. The areas discussed are effects of panel density, internal flow modeling, forebody modeling in subsonic flow, propeller slipstream modeling, effect of wake length, wing-tail-wake interaction, effect of trailing-edge paneling on the Kutta condition, well- and ill-posed boundary-value problems, and induced-drag calculations. These nine topics address problems that are of practical interest to the users of PAN AIR.
The benefits of using computer graphics in design are briefly reviewed. It is shown that computer graphics substantially aids productivity by permitting errors in design to be found immediately and by greatly reducing the cost of fixing the errors and the cost of redoing the process. The possibilities offered by computer-generated displays in terms of information content are emphasized, along with the form in which the information is transferred. The human being is ideally and naturally suited to dealing with information in picture format, and the content rate in communication with pictures is several orders of magnitude greater than with words or even graphs. Since science and engineering involve communicating ideas, concepts, and information, the benefits of computer graphics cannot be overestimated.
The benefits of computer graphics in design are discussed, with particular reference to aerospace applications. The evolution of computer graphics is illustrated by the following examples: solid lines representing the edges of solid geometric parts; graphics with colored lines providing better descriptions of a variety of objects, such as circuit boards, maps, and complete aircraft; graphics with colored surfaces mapping such information as heating rates and pressures on aircraft; and color mapping combined with shading. Finally, examples are given of complex flow fields and scenes showing many objects that are displayed dynamically, with transparency used to clarify these scenes.
PANAIR uses high-order panel method to predict inviscid subsonic or supersonic flows about arbitrary configuration. Panel method solves linear partial differential equation numerically by approximating configuration surface with panels on which unknown "singularity strengths" are defined. PANAIR includes advanced software technology as well as advanced aerodynamic technology.
PAN AIR is a computer program for predicting subsonic or supersonic linear potential flow about arbitrary configurations. It uses linear source and quadratic doublet strength distributions. These higher-order distributions have been implemented in a manner that greatly reduces the numerical stability problems that have plagued earlier attempts to make surface paneling methods work successfully for supersonic flow. PAN AIR's problem-solving capability, numerical approach, modeling features, and program architecture are described. Numerical results are presented for a variety of geometries at supersonic Mach numbers.
This paper demonstrates a numerical technique for canard-wing shape optimization at two operating conditions. For purposes of simplicity, a mean surface wing paneling code is employed for the aerodynamic calculations. The optimization procedures are based on the method of feasible directions. The shape functions for describing the thickness, camber, and twist are based on polynomial representations. The primary design requirements imposed restrictions on the canard and wing volumes and on the lift coefficients at the operating conditions. Results indicate that significant improvements in minimum drag and lift-to-drag ratio are possible with reasonable aircraft geometries. Calculations were done for supersonic speeds with Mach numbers ranging from 1 to 6. Planforms were mainly of a delta shape with aspect ratio of 1.
The history of the development of an aircraft configuration synthesis program using interactive computer graphics was described. A system based on time-sharing was compared to two different concepts based on distributed computing.
Finite element method for predicting aerodynamic characteristics of wing-body combinations
Experimental and theoretical study of symmetrical and cambered delta wing configuration between Mach 2.0 and 10.7
Research effort on wing-body interference at supersonic speeds
Aerodynamic characteristics of leading-edge sweep wing-body combinations
Explore the source record for details and available documents.
Numerical procedure for analyzing and designing wings and wing-body combinations in supersonic flow
Explore the source record for details and available documents.
Explore the source record for details and available documents.