Engineering topics

Card, M. F.

Publications and source records attributed to Card, M. F..

At least 19 records

NASA NTRS1992

Computational technology for high-temperature aerospace structures

The status and some recent developments of computational technology for high-temperature aerospace structures are summarized. Discussion focuses on a number of aspects including: goals of computational technology for high-temperature structures; computational material modeling; life prediction methodology; computational modeling of high-temperature composites; error estimation and adaptive improvement strategies; strategies for solution of fluid flow/thermal/structural problems; and probabilistic methods and stochastic modeling approaches, integrated analysis and design. Recent trends in high-performance computing environment are described and the research areas which have high potential for meeting future technological needs are identified.

Noor, A. K.↗

NASA NTRS1986

Construction and control of large space structures

Recent NASA research efforts on space construction are reviewed. Preliminary results of the EASE/ACCESS Shuttle experiments are discussed. A 45-foot beam was constructed on orbit in 30 minutes using a manual assembly technique at a work station. A large tetrahedron was constructed several times using a free floating technique. The capability of repair, utilities installation, and handling the structures using a mobile foot restraint on the RMS was also demonstrated. Implications of the experiments for space station are presented. Models of 5-meter space station structure together with neutral buoyancy simulations suggest manual assembly techniques are feasible. Selected research on control of flexible structures is discussed.

Card, M. F.↗

NASA NTRS1986

Construction and control of large space structures

Recent NASA research efforts on space construction are reviewed. Preliminary results of the EASE/ACCESS Shuttle experiments are discussed. A 45-foot beam was constructed on orbit in 30 minutes using a manual assembly technique at a work station. A large tetrahedron was constructed several times using a free floating technique. The capability of repair, utilities installation, and handling the structures using a mobile foot restraint on the RMS was also demonstrated. Implications of the experiments for Space Station are presented. Models of 5-meter Space Station structure together with neutral buoyancy simulations suggest manual assembly techniques are feasible. Selected research on control of flexible structures is discussed. To support planned flight experiments, studies of the design and optimal placement of distributed active dampers are underway.

Card, M. F.↗

NASA NTRS1985

Dynamic response of a flexible space beam

Dynamic response of a candidate flexible beam for a space experiment on control of flexible structures is investigated. Studies of natural frequencies reveal a beam length in which torsion and bending frequencies virtually coincide. Eccentric tip mass causes small shifts in natural frequencies but introduces coupled torsional/bending mode shapes. Transient response studies indicate significant effects on tip responses of low damping and first bending mode excitation at higher frequencies. Steady state response suggest displacement and acceleration measurements could be made up to 5 to 12 Hz for the actuator forces/torques assumed.

Card, M. F.↗

NASA NTRS1983

Technical issues in dynamics and control of large space structures

Examples of large space systems currently being considered by NASA include a large communications antenna system (the Land Mobile Satellite System), a precision antenna system (the Large Deployable Reflector System), and a preliminary concept for NASA's space station. Each system has low natural vibration frequencies, stringent pointing requirements, and, for the antennas, demanding surface accuracy requirements. A review is provided of the progress being made in structural ground tests with respect to surface accuracy, deployment, and erection of large structures. Attention is given to the dynamic loads on large space structures, on-orbit testing, space vibration control devices, and the characteristics of distributed control.

Card, M. F.↗

NASA NTRS1983

Structures and mechanisms - Streamlining for fuel economy

The design of prospective NASA space station components which inherently possess the means for structural growth without compromising initial system characteristics is considered. In structural design terms, space station growth can be achieved by increasing design safety factors, introducing dynamic isolators to prevent loads from reaching the initial components, or preplanning the refurbishment of the original structure with stronger elements. Design tradeoffs will be based on the definition of on-orbit loads, including docking and maneuvering, whose derived load spectra will allow the estimation of fatigue life. Improvements must be made in structural materials selection in order to reduce contamination, slow degradation, and extend the life of coatings. To minimize on-orbit maintenance, long service life lubrication systems with advanced sealing devices must be developed.

Card, M. F.↗

NASA NTRS1982

Preliminary sizing of vibration absorber for space mast structures

A simple method of sizing a vibration absorber for a large, cantilevered flexible mast is presented. The method is based on Den Hartog's vibration absorber theory for two-degree-of-freedom systems. Generalized design curves are presented as well as specific numerical results for a candidate space experiment in which a long flexible antenna mast is attached to the shuttle orbiter and dynamically excited by orbiter accelerations. Results indicate that for large flexible masts, the mass of the vibration absorber required to meet stringent tip deflection tolerances becomes prohibitively large.

Card, M. F.↗

NASA NTRS1981

Preliminary design of tetrahedral truss reflector structure

A baseline structure proposed for the microwave radiometer spacecraft (MRS) reflector is a large graphite-epoxy truss. The truss structure was selected to provide adequate stiffness to minimize control problems and to provide a low-expansion 'strong back' on which to mount and control reflector mesh panels. Details of the structural members, joints and assembly concepts are presented, a concept for the reflector mesh surface is discussed, and preliminary estimates of the mass and structural natural frequencies of the reflector system are presented.

Card, M. F.↗

NASA NTRS1981

Preliminary design of large reflectors with flat facets

A concept for approximating curved antenna surfaces using flat facets is discussed. A preliminary design technique for determining the size of the reflector surface facets necessary to meet antenna surface accuracy requirements is presented. A proposed large microwave radiometer satellite (MRS) is selected as an application, and the far-field electromagnetic response of a faceted reflector surface is compared with that from a spherical reflector surface.

Agrawal, P. K.↗

NASA NTRS1980

Graphite-epoxy panel compression strength reduction due to local impact

The effects of low velocity impact on the compressive strength of graphite/epoxy structures are reviewed. Extensive tests were conducted on sandwich beams, laminated plates and stiffened panels. Conditions for failures were investigated by impact tests on statically loaded test specimens. Lightly loaded graphite structures (such as aircraft secondary structure) were insensitive to impact damage. In more heavily loaded structures, (such as wing panels), appreciable reductions in compressive strength occurred. The implications of the tests for structural design are discussed by comparing panel masses for designs where ultimate strains were reduced due to impact considerations with the masses of designs with higher ultimate strains. Preliminary test data are presented to show the possibility of improvements in damage to tolerance achievable by using an alternate matrix material.

Card, M. F.↗

NASA NTRS1980

Preliminary design of large reflectors with flat facets

A concept for approximating curved antenna surfaces using flat facets is discussed. A preliminary design technique for determining the size of the reflector surface facets necessary to meet antenna surface accuracy requirements is presented. A proposed large Microwave Radiometer Satellite is selected as an application, and the far field electromagnetic response of a faceted reflector surface is compared with that from a spherical reflector surface.

Agrawal, P. K.↗

NASA NTRS1980

Large space structures - Fantasies and facts

A review of large space structures activities from 1973 to 1979 is presented. Long-range studies of space colonies, gigantic solar power stations and projected earth applications revived interest in space activities. Studies suggest opportunities for advanced antenna and platform applications. Matching low-thrust propulsion to large flexible vehicles will be a key technology. Current structures technology investigations include deployable and erectable structures and assembly techniques. Based on orbited structures experience, deployment reliability is a critical issue for deployable structures. For erectable structures, concepts for earth-fabricated and space-fabricated memb

Card, M. F.↗

NASA NTRS1978

Technology assessment and outlook

The development of large space structures (LSS) for the 1980s is surveyed. Consideration is given to LSS mission requirements, large space antenna technology, several steps towards LSS development (1985-1995), structures technology needs (e.g., structural design criteria, assembly concepts, and practical joint and member concepts), structural dynamics/controls technology needs, and materials technology needs (e.g., accelerated test techniques and life prediction techniques).

Card, M. F.↗

NASA NTRS1978

Trends in aerospace structures

Recent developments indicate that there may soon be a revolution in aerospace structures. Increases in allowable operational stress levels, utilization of high-strength, high-toughness materials, and new structural concepts will highlight this advancement. Improved titanium and aluminum alloys and high-modulus, high-strength advanced composites, with higher specific properties than aluminum and high-strength nickel alloys, are expected to be the principal materials. Significant advances in computer technology will cause major changes in the preliminary design cycle and permit solutions of otherwise too-complex interactive structural problems and thus the development of vehicles and components of higher performance. The energy crisis will have an impact on material costs and choices and will spur the development of more weight-efficient structures. There will also be significant spinoffs of aerospace structures technology, particularly in composites and design/analysis software.

Card, M. F.↗

NASA NTRS1978

Efficient concepts for large erectable space structures

The status of Langley Research Center development of the nestable column concept is reviewed including results of member and truss component tests, and planned assembly studies. In addition, more recent studies of alternative member concepts are presented. Preliminary results on relative efficiency of several types of truss-type columns are compared and future test plans discussed.

Card, M. F.↗

NASA NTRS1977

Structural stiffness, strength and dynamic characteristics of large tetrahedral space truss structures

Physical characteristics of large skeletal frameworks for space applications are investigated by analyzing one concept: the tetrahedral truss, which is idealized as a sandwich plate with isotropic faces. Appropriate analytical relations are presented in terms of the truss column element properties which for calculations were taken as slender graphite/epoxy tubes. Column loads, resulting from gravity gradient control and orbital transfer, are found to be small for the class structure investigated. Fundamental frequencies of large truss structures are shown to be an order of magnitude lower than large earth based structures. Permissible loads are shown to result in small lateral deflections of the truss due to low-strain at Euler buckling of the slender graphite/epoxy truss column elements. Lateral thermal deflections are found to be a fraction of the truss depth using graphite/epoxy columns.

Mikulas, M. M., Jr.↗

NASA NTRS1972

Advanced design concepts for shuttle airframe structure

The development of weight-saving advanced design concepts for shuttle airframe structure is presented. Design concepts under investigation employ selective composite reinforcement and/or efficient geometric arrangements. An effort to develop metallic panel designs which exploit the relaxation of smooth external-surface requirements for skin structure is reviewed. Available highlights from research and development studies which investigate the application of composite reinforcement to the design of two types of fuselage panels, a shear web, a large fuselage frame, and a landing-gear-door assembly are presented. Preliminary results from these studies suggest weight savings of 25 percent can be obtained.

Card, M. F.↗

NASA NTRS1972

Design, analysis, and tests of a structural prototype Viking aeroshell. I - Aeroshell design and analysis. II - Test procedure and test results.

Two near optimum full-scale Viking aeroshell prototypes (140 deg ring-stiffened conical shells), differing only in base ring size, were designed and tested under uniform pressure to buckling failure. Part I describes the computerized design procedure which iterates between a design program based on approximate equations to determine skin and ring gages and ring spacings, and a sophisticated system of shell of revolution programs for more accurate analysis as a basis for redesign. Part II discusses fabrication techniques, test procedures, and test results. Both buckling and prebuckling data are compared with the theoretical predictions of Part I. Appropriate buckling knockdown factors for this type of construction are identified. Measured strains in skin and rings agreed well with theoretical predictions and the buckling pressure was in close agreement with the design ultimate pressure.

Heard, W. L., Jr.↗