Engineering topics

Cantwell, B. J.

Publications and source records attributed to Cantwell, B. J..

At least 19 records

NASA NTRS1998

Low-Speed Flow Studies Using the Pressure Sensitive Paint Technique

Optical pressure measurements have been made on a NACA 0012 airfoil coated with Pressure Sensitive Paint (PSP) at very low flow speeds (less than 50 m/s). Angle of attack was limited to 5 deg. for most measurements. Effects of temperature gradients and mis-registration errors on PSP response have been established and minimized. By reducing measurement error caused by these effects. PSP sensitivity has been enhanced. Acceptable aerodynamic data at flow speeds down to 20 m/s have been obtained and valid pressure paint response was observed down to 10 m/s. Measurement errors (in terms of pressure and pressure coefficient) using PSP with pressure taps as a reference are provided for the range of flow speeds from 50 m/s to 10 m/s.

Brown, O. C.↗

NASA NTRS1996

A study of the turbulence structures of wall-bounded shear flows

This project extends the study of the structure of wall-bounded flows using the topological properties of eddying motions as developed by Chong et al. (1990), Soria et al. (1992, 1994), and as recently extended by Blackburn et al. (1996) and Chacin et al. (1996). In these works, regions of flow which are focal in nature are identified by being enclosed by an isosurface of a positive small value of the discriminant of the velocity gradient tensor. These regions resemble the attached vortex loops suggested first by Theodorsen (1955). Such loops are incorporated in the attached eddy model versions of Perry & Chong (1982), Perry et al. (1986), and Perry & Marusic (1995), which are extensions of a model first formulated by Townsend (1976). The DNS data of wall bounded flows studied here are from the zero pressure gradient flow of Spalart (1988) and the boundary layer with separation and reattachment of Na & Moin (1996). The flow structures are examined from the viewpoint of the attached eddy hypothesis.

Chong, M. S.↗

NASA NTRS1996

Experimental study of vortex breakdown in a cylindrical, swirling flow

The stability of a steady, vortical flow in a cylindrical container with one rotating endwall has been experimentally examined to gain insight into the process of vortex breakdowwn. The dynamics of the flow are governed by the Reynolds number (Re) and the aspect ratio of the cylinder. Re is given by Omega R(sup 2)/nu, where Omega is the speed of rotation of the endwall, R is the cylinder radius, and nu is the kinematic viscosity of the fluid filling the cylinder. The aspect ratio is H/R, where H is the height of the cylinder. Numerical simulation studies disagree whether or not the steady breakdown is stable beyond a critical Reynolds number, Re(sub c). Previous experimental researches have considered the steady and unsteady flows near Re(sub c), but have not explored the stability of the steady breakdown structures beyond this value. In this investigation, laser induced fluorescence was utilized to observe both steady and unsteady vortex breakdown at a fixed H/R of 2.5 with Re varying around Re(sub c). When the Re of a steady flow was slowly increased beyond Re(sub c), the breakdown structure remained steady even though unsteadiness was possible. In addition, a number of hysteresis events involving the oscillation periods of the unsteady flow were noted. The results show that both steady and unsteady vortex breakdown occur for a limited range of Re above Re(sub c). Also, with increasing Re, complex flow transformations take place that alter the period at which the unsteady flow oscillates.

Stevens, J. L.↗

NASA NTRS1992

Investigation of a co-flowing buoyant jet - Experiments on the effect of Reynolds number and Richardson number

The behavior of a vertical jet of helium issuing into a co-flow of air at a fixed exit velocity ratio of 2 was investigated experimentally over a wide range of governing parameters with emphasis on flow structure and the scaling properties of the natural frequency of the jet. The experiments were conducted in a variable-pressure facility, which made it possible to vary the Reynolds number and the Richardson number independently. At all the experimental conditions studied, the flow exhibits a strong self-excited periodicity. A buoyancy Strouhal number is defined and used to correlate frequency data from the approximately seventy different Reynolds and Richardson numbers studied. The buoyancy Strouhal number is found to be nearly independent of Reynolds number and Richardson number for Richardson numbers greater than one.

Subbarao, E. R.↗

NASA NTRS1992

A study of the fine scale motions of incompressible time-developing mixing layers

This work is an extension of a project conducted at the previous CTR summer program and was reported by Chen et al. (1990). In that program, the geometry and topology of the dissipating motions in a variety of shear flows was examined. All data was produced by direct numerical simulations (DNS). The partial derivatives of the velocity field were determined at every grid point in the flow and various invariants and related quantities were computed from the velocity gradient tensor. Motions characterized by high rates of kinetic energy dissipation and high enstrophy were of particular interest. Scatter diagrams of the invariants were mapped out and interesting and unexpected patterns were seen. Each type of shear layer produced its own characteristic scatter plot. In the present project, attention is focused on the incompressible plane mixing layer, and the scatter diagrams are replaced with more useful joint probability density contours. Comparison of the topology of the dissipating motions of flows at different Reynolds numbers are made. Also, plane mixing layers at the same Reynolds number but with different initial conditions are compared.

Soria, J.↗

NASA NTRS1991

Spectral Method For Simulation Of Vortex Rings

Method of computation relying on spectral basis functions developed especially for simulation of axisymmetric vortex rings in incompressible, viscous fluid with quiescent far field. Contributes to understanding of flows in and around vortex rings during long propagation times, including such theoretically and practically important phenomena as drift and expansion of ring, "leapfrogging" and coalescence of two rings, and shedding of vorticity into wake of propagating ring.

Stanaway, S. K.↗

NASA NTRS1991

Stability of low-speed reacting flows

Small perturbation, linear, inviscid stability theory is developed and applied to coflowing chemically reacting jets. A necessary condition for the existence of axisymmetric and azimuthal instabilities is derived. The eigenfunction structure provides considerable insight into the underlying physical mechanism. In nonpremixed cases, high temperature tends to occur in regions where the shear layer tries to roll up; this reduces the available momentum, suppressing the growth of instabilties. It is found that chemical reaction during the growth of instabilities is unimportant, suggesting that this effect could be ignored in a viscous theory. Both nonpremixed and premixed flames in axisymmetric shear layers are generally more stable to small perturbations than in the corresponding cold case. However, while for nonpremixed flames the frequency of the most amplified wave decreases with increasing heat release, the opposite occurs for premixed cases.

Mahalingham, S.↗

NASA NTRS1990

A study of the topology of dissipating motions in direct numerical simulations of time-developing compressible and incompressible mixing layers

A preliminary investigation of the geometry of flow patterns in numerically simulated compressible and incompressible mixing layers was carried out using 3-D critical point methodology. Motions characterized by high rates of kinetic energy dissipation and/or high enstrophy were of particular interest. In the approach the partial derivatives of the velocity field are determined at every point in the flow. These are used to construct the invariants of the velocity gradient tensor and the rate-of-strain tensor (P, Q, R, and P(sub s), Q(sub s), R(sub s) respectively). For incompressible flow the first invariant is zero. For the conditions of the compressible simulation, the first invariant is found to be everywhere small, relative to the second and third invariants, and so in both cases the local topology at a point is mainly determined by the second and third invariants. The data at every grid point is used to construct scatter plots of Q versus R and Q(sub s) versus R(sub s). Most points map to a cluster near the origin in Q-R space. However, fine scale motions, that is motions which are characterized by velocity derivatives which scale with the square root of R(sub delta), tend to map to regions which lie far from the origin. Definite trends are observed for motions characterized by high enstrophy and/or high dissipation. The observed trends suggest that, for these motions, the second and third invariants of the velocity gradient and rate-of-strain tensors are strongly correlated. The second and third invariants of the rate-of-strain tensor are related by K(-Q(sub s))(exp 3/2), which is consistent with the above scaling of velocity derivatives. The quantity K appears to depend on Reynolds number with an upper limit K = 2(the square root of 3)/9 corresponding to locally axisymmetric flow. For both the compressible and incompressible mixing layer, regions corresponding to high rates of dissipation are found to be characterized by comparable magnitudes of R(sub ij)R(sub ij) and S(sub ij)S(sub ij). For the incompressible mixing layer, regions characterized by the highest values of enstrophy are found to have relatively low strain rates.

Chen, J. H.↗

NASA NTRS1990

Full numerical simulation of coflowing, axisymmetric jet diffusion flames

The near field of a non-premixed flame in a low speed, coflowing axisymmetric jet is investigated numerically using full simulation. The time-dependent governing equations are solved by a second-order, explicit finite difference scheme and a single-step, finite rate model is used to represent the chemistry. Steady laminar flame results show the correct dependence of flame height on Peclet number and reaction zone thickness on Damkoehler number. Forced simulations reveal a large difference in the instantaneous structure of scalar dissipation fields between nonbuoyant and buoyant cases. In the former, the scalar dissipation marks intense reaction zones, supporting the flamelet concept; however, results suggest that flamelet modeling assumptions need to be reexamined. In the latter, this correspondence breaks down, suggesting that modifications to the flamelet modeling approach are needed in buoyant turbulent diffusion flames.

Mahalingam, S.↗

NASA NTRS1989

Effects of heat release on the structure and stability of a coflowing, chemically reacting jet

It is shown how linear stability analysis and full simulations can be used to study the stability and structure of reacting flows. The small effect of gravity on steady laminar flame heights can be modeled if allowance is made for the density variations due to heat release. It is found that cold transitional jet simulations yield perturbation growth rates which are consistent with the predictions of the inviscid stability theory.

Mahalingam, S.↗

NASA NTRS1988

A numerical study of viscous vortex rings using a spectral method

Viscous, axisymmetric vortex rings are investigated numerically by solving the incompressible Navier-Stokes equations using a spectral method designed for this type of flow. The results presented are axisymmetric, but the method is developed to be naturally extended to three dimensions. The spectral method relies on divergence-free basis functions. The basis functions are formed in spherical coordinates using Vector Spherical Harmonics in the angular directions, and Jacobi polynomials together with a mapping in the radial direction. Simulations are performed of a single ring over a wide range of Reynolds numbers (Re approximately equal gamma/nu), 0.001 less than or equal to 1000, and of two interacting rings. At large times, regardless of the early history of the vortex ring, it is observed that the flow approaches a Stokes solution that depends only on the total hydrodynamic impulse, which is conserved for all time. At small times, from an infinitely thin ring, the propagation speeds of vortex rings of varying Re are computed and comparisons are made with the asymptotic theory by Saffman. The results are in agreement with the theory; furthermore, the error is found to be smaller than Saffman's own estimate by a factor square root ((nu x t)/R squared) (at least for Re=0). The error also decreases with increasing Re at fixed core-to-ring radius ratio, and appears to be independent of Re as Re approaches infinity). Following a single ring, with Re=500, the vorticity contours indicate shedding of vorticity into the wake and a settling of an initially circular core to a more elliptical shape, similar to Norbury's steady inviscid vortices. Finally, we consider the case of leapfrogging vortex rings with Re=1000. The results show severe straining of the inner vortex core in the first pass and merging of the two cores during the second pass.

Stanaway, S. K.↗

NASA NTRS1988

Navier-Stokes simulations of axisymmetric vortex rings

The solution of the incompressible Navier-Stokes equations by means of a spectral method is used in the present numerical investigation of viscous axisymmetric vortex rings, in the cases of a single ring over the 0.001-1000 Re number range, and a pair of interacting rings. The propagation speeds of vortex rings of varying Re are computed and compared with the results of Saffman's (1970) theory; the present error estimate is found to be smaller than Saffman's, and to decrease with increasing Re at fixed core/ring radius ratio. The 'leapfrogging' of two vortex rings of equal sign and Re=1000 each is observed, indicating severe strain of the vortex core through the first pass and merging during the second pass.

Stanaway, S. K.↗

NASA NTRS1987

A full simulation of a vortex ring

A three-dimensional spectral method is developed for the solution to the incompressible Navier-Stokes equations in an unbounded domain. The spectral method relies on divergence-free basis functions as proposed by Leonard (1981). The basis functions are formed using vector spherical harmonics and Jacobi polynomials together with a mapping in the radial direction. An axisymmetric code was written and is verified using an exact solution of the Stokes equations. Preliminary results for the evolution of a vortex ring according to the Navier-Stokes equations are presented.

Stanaway, S. K.↗

NASA NTRS1986

Transition and mixing in axisymmetric jets and vortex rings

A class of impulsively started, axisymmetric, laminar jets produced by a time dependent joint source of momentum are considered. These jets are different flows, each initially at rest in an unbounded fluid. The study is conducted at three levels of detail. First, a generalized set of analytic creeping flow solutions are derived with a method of flow classification. Second, from this set, three specific creeping flow solutions are studied in detail: the vortex ring, the round jet, and the ramp jet. This study involves derivation of vorticity, stream function, entrainment diagrams, and evolution of time lines through computer animation. From entrainment diagrams, critical points are derived and analyzed. The flow geometry is dictated by the properties and location of critical points which undergo bifurcation and topological transformation (a form of transition) with changing Reynolds number. Transition Reynolds numbers were calculated. A state space trajectory was derived describing the topological behavior of these critical points. This state space derivation yielded three states of motion which are universal for all axisymmetric jets. Third, the axisymmetric round jet is solved numerically using the unsteady laminar Navier Stokes equations. These equations were shown to be self similar for the round jet. Numerical calculations were performed up to a Reynolds number of 30 for a 60x60 point mesh. Animations generated from numerical solution showed each of the three states of motion for the round jet, including the Re = 30 case.

Allen, G. A., Jr.↗

NASA NTRS1986

Simulations of turbulent mixing and reacting flows and their applications to turbulence modeling

The method of full simulation is applied to reacting turbulent flows. Full simulation has proven of great value as a complement to experiments for the study of nonreacting turbulent flows. It provides insight into the physics of turbulent flows and their modeling. It is natural to try to extend these methods to the simulation of reacting turbulent flows. Because this is one of the first attempts at this type of simulation, a subsidiary goal of this work is to demonstrate the feasibility of using simulation to study turbulent reacting flows. In addition, it is shown that such simulations can be used to provide physical insight into the nature of turbulent combustion and to provide data that will help to construct models that can be used in engineering simulations of turbulent reacting flows.

Ferziger, J. H.↗

NASA NTRS1986

Numerical simulation of transonic separated flows over low-aspect ratio wings

Transonic flow fields about a low-aspect-ratio advanced technology wing have been computed using a viscous/inviscid zonal approach. The flow field near the wing where viscous effects are important was solved using the 'Reynolds-Averaged Navier-Stokes Equations' in 'thin-layer' form. The Euler equations were used to determine the flow field in regions away from the wing where viscous effects are insignificant. A zonal grid using an H-H topology was generated around the wing by first solving a set of Poisson's equations for the global grid. This grid was then subdivided into separate zones of viscous or inviscid flow as suggested by the flow physics. A series of flow cases were computed and compared with corresponding sets of experimental data. All cases showed good agreement with experiment in terms of the pressure field. Also, a good correlation between computed separated surface flow and experimental oil flow was obtained.

Kaynak, U.↗

NASA NTRS1984

Transition and mixing in impulsively started jets and vortex rings

A new method is used to analyze transition in impulsively started jets and vortex rings. The method uses similarity variables to reduce the equations for unsteady particle paths to a quasi-autonomous system with the Reynolds number as a parameter. The flow pattern is represented in terms of the phase portrait of this system and the structure of the flow is defined by its critical points. Flow transition is examined in terms of bifurcations in the topology of the phase portrait which occur as the Reynolds number is increased. There is no assumption that the flow is parallel or that it is subjected to small disturbances. The method of analysis, through straightforward, is new and lies outside the usual small disturbance theory used to determine the stability of various profile shapes.

Cantwell, B. J.↗

NASA NTRS1982

Conference on Complex Turbulent Flows: Comparison of Computation and Experiment, Stanford University, Stanford, CA, September 14-18, 1981, Proceedings. Volume 2 - Taxonomies, reporters' summaries, evaluation, and conclusions

Computational techniques for simulating turbulent flows were explored, together with the results of experimental investigations. Particular attention was devoted to the possibility of defining a universal closure model, applicable for all turbulence situations; however, conclusions were drawn that zonal models, describing localized structures, were the most promising techniques to date. The taxonomy of turbulent flows was summarized, as were algebraic, differential, integral, and partial differential methods for numerical depiction of turbulent flows. Numerous comparisons of theoretically predicted and experimentally obtained data for wall pressure distributions, velocity profiles, turbulent kinetic energy profiles, Reynolds shear stress profiles, and flows around transonic airfoils were presented. Simplifying techniques for reducing the necessary computational time for modeling complex flowfields were surveyed, together with the industrial requirements and applications of computational fluid dynamics techniques.

Kline, S. J.↗