Engineering Papers⌕ Search

Engineering topics

Campagnola, Stefano

Publications and source records attributed to Campagnola, Stefano.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Effect of V-infinity Leveraging with Lunar-earth Gravity Assist on Interplanetary Trajectories

This work evaluates the effects of Lunar-Earth Gravity Assist on mission design and DV budget for interplanetary trajectories using Earth flybys and V1 Leveraging Maneuvers. The use of the Moon flyby, in combination to the Earth flyby, provides additional deviation of the hyperbolic excess velocity with respect to the Earth, also modifying its magnitude, and hence increases the overall flyby performance. The Lunar-Earth Gravity Assist has been evaluated for Exterior and Interior Leveraging, as well as for Short and Long transfers. A sample Jupiter mission is showcased, and the results suggest that the Moon effect during the flyby can reduce the total DVtot by 6.4% and the leveraging DVVILM by 21.06%.

Campagnola, Stefano↗
NASA NTRS2021

Equuleus Launch Window Analysis and Mission Design

This paper presents the trajectory design process for EQUULEUS, a 6U CubeSat developed by JAXA and the University of Tokyo that is scheduled to launch as a piggyback of NASA’s Artemis 1. After separation from the upper stage of the Space Launch System, EQUULEUS will maneuver along a low-energy transfer to an Earth–Moon quasi-rectilinear halo orbit in 1-to-4 resonance with the lunar synodic period. As a secondary payload, the trajectory of EQUULEUS needs to be compatible with the requirements of the primary mission, but also robust against disturbances and potential changes in the deployment state. Realistic initial conditions spanning two years of potential launch windows are processed and the solution structure for optimal lunar transfers is analyzed. A host of candidate solutions is presented, compatibly with the fuel and power limitations of EQUULEUS. The global understanding of the solution space is shown to be insightful for the design of robust trajectories for limited control-authority spacecraft.

Kawakatsu, Yasuhiro↗
NASA NTRS2019

Europa Lander trajectory design: case studies for the direct-to-earth architecture

This paper presents interesting phasing problems that came up in support of design studies for a potential Europa Lander mission. Recent system trades were performed after the Mission Concept Review in fall 2017, when the NASA board recommended the Europa Lander project design a Direct-to-Earth architecture, i.e. where the Lander would communicate directly to the Earth, without data relay from the carrier vehicle.

Landau, Damon↗
NASA NTRS2019

On alighting daintily at Jupiter: innovative methods for efficiently achieving Jovian orbit

Spacecraft bound for Jupiter orbit typically spend the majority of their ΔV in the capture process. The Galilean satellites provide myriad flyby opportunities to assist in the capture process. In addition, the relatively low solar range (compared to the other outer planets) and absence of significant rings add to the option space. Starting with typical single-flyby and Jupiter Orbit Insertion (JOI) maneuver sequences, we will walk through a range of capture options, including longer post-capture tours, double flybys (and their constraints), combined with solar-electric propulsion (SEP) usage, and finally the potential benefits of retrograde, “cloudtops” orbit insertion. In combination with a ΔV-EGA interplanetary trajectory, the cloudtops arrival saves over 500 m/s in the capture sequence.

Siddique, Fazie E.↗
NASA NTRS2019

Global search of resonant trasfers for a Europa Lander to Clipper data relay

Following its prime mission Europa Clipper becomes a potential asset to relay data from a proposed Europa Lander back to Earth. To this end, we describe an efficient method to globally search for trajectories that repeatedly fly over the same location of Europa. Different families of trajectories emerge with different flyby geometries that satisfy a convoluted set of landing constraints. Here, the landing location and local solar time must match a limited set derived from expected Clipper observations, while providing multiple opportunities to land in a given season. We include estimates for data volume and radiation dose associated with these resonant trajectories.

Campagnola, Stefano↗
NASA NTRS2018

Tour Design Techniques for the Europa Clipper Mission

Europa is one of the most scientifically interesting targets of the solar system, as it may possess the three necessary ingredients for life: an extensive ocean of liquid water, an energy source from tidal heating, and a suite of biogenic elements. To explore the habitability of Europa, NASA is developing the Europa Clipper mission, currently scheduled to be launched in 2022. Europa resides deep inside the gravity well of Jupiter, in a region of the magnetosphere with many trapped ionized particles that get accelerated to near relativistic speeds; a Europa orbiter mission would require a large amount of ∆V for an orbit insertion maneuver, and would only return limited science data before being critically exposed to radiation. To mitigate these issues, Europa Clipper instead only utilizes Europa flybys, connected by Europa-resonant and non-resonant orbits. Science data is collected during high-radiation passes, and returned to Earth during the rest of the Jovian orbits, at a much lower radiation dose exposure. This paper will present several tour tools techniques developed for the design of the Europa Clipper flyby trajectory. In particular, the paper will describe different ways to perform fast line-of-apsides rotations; a new approach to improve the coverage of Europa’s trailing and leading edges, with the lighting conditions considerations; parametric studies of the expected radiation dose and time-of-flight as function of the Europa resonance; and a quick way to estimate the radiation dose for Jovian tours. Other techniques, that were already presented in previous papers, will be reviewed for completeness. We then implement some of the new approaches in the 18F17 tour.

Pellegrini, Etienne↗
NASA NTRS2018

Mission analysis for the EM-1 CubeSats EQUULEUS and OMOTENASHI

EQUULEUS is a Lunar L2 orbiter and a 6-Unit CubeSat by JAXA and the University of Tokyo. OMOTENASHI is a 6-Unit CubeSat by JAXA, the world’s smallest Lunar lander. EQUULEUS and OMOTENASHI are among the 13 secondary payloads selected by NASA to be launched with Exploration Mission-1 in 2019. Despite their limited size and cost, EQUULEUS and OMOTENASHI are challenging missions, especially in terms of trajectory design and control. EQUULEUS exploits the Earth-Sun-Moon chaotic dynamics and enter a libration point orbit around the L2 of the Earth-Moon system, using a new water propulsion system with low thrust and little propellant. This “Orbit Control Experiment” is one of the main objectives of the mission. OMOTENASHI executes a semi-hard landing that requires breaking the spacecraft to a stop just a few-hundred meters above the Moon’s surface. Both missions present new and unique challenges, where the design of the nominal trajectory is mainly driven by the constrains on orbital control capabilities, and operational and robustness considerations. This paper presents the current baselines, and give an overview of the new techniques developed for their design.

Oshima, Kenta↗
NASA NTRS2017

Evolution of Trajectory Design Requirement of NASA's Planned Europa Clipper Mission

Europa is one of the most scientifically intriguing targets in planetary science due to its potential suitability for extant life. As such, NASA has funded the California Institute of Technology Jet Propulsion Laboratory and the Johns Hopkins University Applied Physics Laboratory to jointly develop the planned Europa Clipper mission—a multiple Europa flyby mission architecture aimed to thoroughly investigate the habitability of Europa and provide reconnaissance data to determine a landing site that maximizes the probability of both a safe landing and high scientific value for a potential future Europa lander. The trajectory design—a major enabling component for this Europa Clipper mission concept—was developed to maximize science from a set of eight model payload instruments determined by a NASA-appointed Europa Science Definition Team (SDT) between 2011-2015. On May 26, 2015, NASA officially selected 10 instruments from 6 different U.S. research facilities and universities. With the selection of instruments have come the development of new science measurement requirements, as well as a rich set of requirements stemming from project policies, planetary protection, and the evolved capability and characteristics of the flight system and mission operations system. This paper will focus on the evolution of requirements levied on the trajectory design, discuss strategies and solutions to the multidimensional optimization problem of designing high fidelity end-to-end trajectories that maximize Europa science while mitigating mission risk, complexity and cost, and last, verification of candidate trajectories to meet the requirements on the trajectory design.

Buffington, Brent↗
NASA NTRS2014

Analysis of Petal Rotation Trajectory Characteristics

In this study, the characteristics of petal rotation trajectories are explored in both the two-body and circular restricted three-body problem (CRTBP) models. Petal rotation trajectories alternate long and short resonances of different kinds to rotate the line of apsides. They are typically computed using the patched conic model, and they are used in a number of different missions and mission concepts including Cassini, JUICE, and Europa mission concepts. Petal rotation trajectories are first analyzed here using the patched conic model to quantify their characteristics and search for cases with fast rotation of the line of apsides. When they are computed in the CRTBP, they are unstable periodic orbits with corresponding stable and unstable manifolds. The characteristics of these orbits are explored from a dynamical systems perspective in the second phase of the study.

Resonance↗