Engineering Papers⌕ Search

Engineering topics

Cameron, R. M.

Publications and source records attributed to Cameron, R. M..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

NASA's 91-cm. airborne telescope

The Gerard P. Kuiper Airborne Observatory (KAO), commissioned in May 1975, is the result of the multi-year NASA program of infrared observations from high-flying aircraft. The KAO is a highly modified Lockheed C-141 jet transport, equipped with a 91-cm bent-Cassegrain telescope, as an international facility for research in infrared astronomy. To minimize the effects of aircraft vibration, the telescope is mounted on four pneumatic shock absorbers, and the entire assembly is balanced on the side of a spherical compressed-air bearing, containing a 0.018 mm-thick air film under a pressure of 19 atmospheres. The use of the KAO is not limited to infrared research, its total observable wavelength band extending from the near UV (3000 A) to the millimeter region. Design and technical characteristics of the telescope are discussed, including the image stabilization and target acquisition systems, as well as observational results obtained during the first year of the KAO operation.

Cameron, R. M.↗
NASA NTRS1974

Airborne infrared astronomy telescope

Description of a 91.5-cm (36-in.) airborne infrared telescope installed in a C141A StarLifter as a national IR observatory. The telescope system is mounted in a specially constructed cavity located just ahead of the leading edge of the wing. All controls and ancillary systems are located in consoles and racks mounted aft of the telescope. The telescope is a conventional Cassegrain design which can be used either directly with the focal point behind the primary mirror or in a folded configuration by inserting a tertiary mirror following the secondary which folds the optical path through the support bearing into the aircraft cabin area. The telescope system is designed to operate at all ambient conditions from sea level to 15,200 m. The system is optimized for operation at ambient temperatures experienced at 13,000 to 15,000 m (220 K). The entire telescope assembly with the exception of noncritical covers and brackets is constructed of Invar-type material to minimize the effects of thermal distortions. Pointing accuracy and stability of the telescope with respect to the target are achieved through multiple stages of stabilization and vibration isolation equipment.

Cameron, R. M.↗
NASA NTRS1972

NASA-ARC 36 inch airborne infrared telescope

A 36 in. aperture telescope is being developed for installation aboard a NASA-Lockheed C-141A aircraft. This airborne observatory will permit observation of infrared emission at altitudes above 45,000 ft above much of the infrared-absorbing atmospheric water vapor. The telescope will look through a movable open port in the aircraft fuselage. A porous spoiler, upstream from the open port, will attenuate pressure disturbances and permit operation at ambient temperatures and pressures without an obscuring window. The telescope's entire structure is supported by a 16 in. spherical air bearing, which effectively isolates it from angular aircraft motions. This air bearing support, with inertial stabilization and star tracking, will permit net line of sight stability of better than 2 arcsec rms.

Mobley, R. E.↗