Radial stellar populations of AGN-host dwarf galaxies in SDSS-IV MaNGA survey
Not provided.
Engineering topics
Publications and source records attributed to Cai, Wei.
Not provided.
The study of microstructure evolution in additive manufacturing of metals would be aided by knowing the thermal history. Since temperature measurements beneath the surface are difficult, estimates are obtained from computational thermo-mechanical models calibrated against traces left in the sample revealed after etching, such as the trace of the melt pool boundary. Here we examine the question of how reliable thermal histories computed from a model that reproduces the melt pool trace are. To this end, we perform experiments in which one of two different laser beams moves with constant velocity and power over a substrate of 17-4PH SS or Ti-6Al-4V, with low enough power to avoid generating a keyhole. We find that thermal histories appear to be reliably computed provided that (a) the power density distribution of the laser beam over the substrate is well characterized, and (b) convective heat transport effects are accounted for. Poor control of the laser beam leads to potentially multiple three-dimensional melt pool shapes compatible with the melt pool trace, and therefore to multiple potential thermal histories. Ignoring convective effects leads to results that are inconsistent with experiments, even for the mild melt pools here.
Highlights: • MBD2 deficiency resulted in retardation of T cell differentiation at the DN3 stage. • Decreased proliferative capacity and increased apoptosis were detected in Mbd2{sup −/−} DN thymocytes. • MBD2 affects early T cell development by regulating the expression of key genes of WNT pathway. DNA methylation alters the expression of certain genes without any alteration to the DNA sequence and is a dynamic process during normal hematopoietic differentiation. As an epigenetic regulator, methyl-CpG-binding domain protein 2 (MBD2) is an important member of the MBD protein family and is acknowledged as a “reader” of DNA methylation. We used a mouse model to study the effects of MBD2 on the early development of T cells. Here, we found that MBD2 deficiency led to retardation of T cell differentiation at the DN3 stage. Meanwhile, decreased proliferative capacity and increased apoptosis were detected in Mbd2{sup −/−} DN thymocytes. Furthermore, we found the WNT pathway was significantly down-regulated in Mbd2{sup −/−} DN thymocytes: DKK1 (Dickkopf-1) expression was significantly increased, while TCF7 (transcription factor 7) and c-MYC were down-regulated. Thus, these findings established that MBD2 acted as a dominant regulator to imprint DN T cell development via the WNT pathway.
In this work, we present a dislocation density-based strain hardening model for single crystal copper through a systematic coarse-graining analysis of more than 200 discrete dislocation dynamics (DDD) simulations of plastic deformation under uniaxial tension. The proposed constitutive model has two components: a generalized Taylor relation connecting resolved shear stresses to dislocation densities on individual slip systems, and a generalized Kocks-Mecking model for dislocation multiplication. The DDD data strongly suggests a logarithmic dependence of flow stress on the plastic shear strain rate on each slip system, and, equivalently, an exponential dependence of the plastic shear strain rate on the resolved shear stress. Hence the proposed generalized Taylor relation subsumes the Orowan relation for plastic flow. The DDD data also calls for a correction to the Kocks-Mecking model of dislocation multiplication to account for the increase of dislocation density on slip systems with negligible plastic shear strain rate. This is accomplished by allowing the multiplication rate on each slip system to include contributions from the plastic strain rates of the two coplanar slip systems. The resulting constitutive model successfully captures the strain hardening rate dependence on the loading orientation as predicted by the DDD simulations, which is also consistent with existing experiments.
The energy barrier for homogeneous cross-slip of a screw dislocation in face-centered cubic (FCC) nickel is calculated using atomistic simulations as a function of the Escaig stress on the glide plane, the Escaig stress on the cross-slip plane, and the Schmid stress on the cross-slip plane. Two cross-slip mechanisms, Friedel-Escaig (FE) and Fleischer, are examined and their energy barriers are calculated for a large number of stress combinations. For each mechanism, the energy barrier as a function of three stress components can be reduced into a one-dimensional function of an effective stress. The stress domains in which FE and Fleischer mechanisms operate respectively are determined. Additionally, the FE mechanism dominates when the Escaig stress on the glide plane (in the direction that reduces the stacking fault width) is the largest stress component. Increasing the Schmid stress and Escaig stress (in the direction that expands the stacking fault width) on the cross slip plane promotes the Fleischer mechanism. The cross slip energy barrier functions obtained here can be used as input functions for computing cross slip rates in mesoscale dislocation dynamics simulations.
The mechanical behavior of submicron body-centered cubic (BCC) micro-pillars is investigated by three-dimensional dislocation dynamics (DD) simulations to better understand the governing mechanisms for size dependent plasticity under uniaxial tension and pure torsion. A formula is developed to compute the incremental plastic twist due to dislocation motion in DD simulations. The DD simulations show that different dislocation microstructures are created depending on the loading conditions, which leads to different size dependent mechanical behavior. While in tension plasticity is mainly governed by the kinetics of dislocation motion controlled partly by the surface dislocation sources, plastic flow in torsion is controlled by dislocation pile-ups associated with strain gradients. The simulation results also reveal a Bauschinger effect and plastic recovery under cyclic twist, which have been observed in recent experiments.
Dislocations play a vital role in the mechanical behavior of crystalline materials during deformation. To capture dislocation phenomena across all relevant scales, a multiscale modeling framework of plasticity has emerged, with the goal of reaching a quantitative understanding of microstructure–property relations, for instance, to predict the strength and toughness of metals and alloys for engineering applications. This review describes the state of the art of the major dislocation modeling techniques, and then discusses how recent progress can be leveraged to advance the frontiers in simulations of dislocations. Furthermore, the frontiers of dislocation modeling include opportunities to establish quantitative connections between the scales, validate models against experiments, and use data science methods (e.g., machine learning) to gain an understanding of and enhance the current predictive capabilities.
Modeling and simulation is transforming modern materials science, becoming an important tool for the discovery of new materials and material phenomena, for gaining insight into the processes that govern materials behavior, and, increasingly, for quantitative predictions that can be used as part of a design tool in full partnership with experimental synthesis and characterization. Modeling and simulation is the essential bridge from good science to good engineering, spanning from fundamental understanding of materials behavior to deliberate design of new materials technologies leveraging new properties and processes. This Roadmap presents a broad overview of the extensive impact computational modeling has had in materials science in the past few decades, and offers focused perspectives on where the path forward lies as this rapidly expanding field evolves to meet the challenges of the next few decades. The Roadmap offers perspectives on advances within disciplines as diverse as phase field methods to model mesoscale behavior and molecular dynamics methods to deduce the fundamental atomic-scale dynamical processes governing materials response, to the challenges involved in the interdisciplinary research that tackles complex materials problems where the governing phenomena span different scales of materials behavior requiring multiscale approaches. The shift from understanding fundamental materials behavior to development of quantitative approaches to explain and predict experimental observations requires advances in the methods and practice in simulations for reproducibility and reliability, and interacting with a computational ecosystem that integrates new theory development, innovative applications, and an increasingly integrated software and computational infrastructure that takes advantage of the increasingly powerful computational methods and computing hardware.
The structural, heat capacity, and magnetic properties of Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} were investigated in this work. Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} maintains the pyrochlore structure, but lattice constants are observed to decrease continuously with the Ti{sup 4+} doping. The magnetic measurements indicate a magnetic phase transition at low temperature for all Ti-doped samples, and the Ti{sup 4+} doping suppresses the transition temperature. This is ascribed to the diluted effect of nonmagnetic Ti{sup 4+} substitution of magnetic Mo{sup 4+}. The heat capacity data confirm that the low-temperature magnetic phase is spin glass in the Ti{sup 4+}-doped Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} system. The M(H) data reveals the coexistence of antiferromagnetic and ferromagnetic interactions at low temperatures.
The fractional Laplacian in $\mathbb{R}^{d}$, which we write as (–Δ) α/2 with, α ϵ (0, 2) has multiple equivalent characterizations. Furthermore, in bounded domains, boundary conditions must be incorporated in these characterizations in mathematically distinct ways, and there is currently no consensus in the literature as to which definition of the fractional Laplacian in bounded domains is most appropriate for a given application. The Riesz (or integral) definition, for example, admits a nonlocal boundary condition, where the value of a function must be prescribed on the entire exterior of the domain in order to compute its fractional Laplacian. Yet, the spectral definition requires only the standard local boundary condition. These differences, among others, lead us to ask the question: “What is the fractional Laplacian?” Beginning from first principles, we compare several commonly used definitions of the fractional Laplacian theoretically, through their stochastic interpretations as well as their analytical properties. Next, we present quantitative comparisons using a sample of state-of-the-art methods. We discuss recent advances on nonzero boundary conditions and present new methods to discretize such boundary value problems: radial basis function collocation (for the Riesz fractional Laplacian) and nonharmonic lifting (for the spectral fractional Laplacian). In our numerical studies, we aim to compare different definitions on bounded domains using a collection of benchmark problems. We consider the fractional Poisson equation with both zero and nonzero boundary conditions, where the fractional Laplacian is defined according to the Riesz definition, the spectral definition, the directional definition, and the horizon-based nonlocal definition. We verify the accuracy of the numerical methods used in the approximations for each operator, and we focus on identifying differences in the boundary behaviors of solutions to equations posed with these different definitions. Through our efforts, we aim to further engage the research community in open problems and assist practitioners in identifying the most appropriate definition and computational approach to use for their mathematical models in addressing anomalous transport in diverse applications.
Purpose: We aim to compare the results of spin echo–echo planar imaging (SE-EPI)-based T2 mapping with those of the conventional Carr–Purcell–Meiboom–Gill (CPMG) method and to investigate the potential validity of SE-EPI-T2 mapping for the characterization of prostate cancer (PCa). Methods: Our retrospective study included 42 PCa patients and 42 noncancer patients who underwent 3.0T MRI with b values ranging from 0 to 2000 s/mm{sup 2} and echo times (TEs) ranging from 32 to 100 ms before biopsies. Bland–Altman analysis was used to compare the agreement between the two methods. The correlations between CPMG-T2 values and SE-EPI-T2 values at different b values were determined by Spearman’s rho analysis or Pearson analysis. The Mann–Whitney U test and two-sample t tests were used to analyze the differences between the cancerous and noncancerous groups. Results: Substantial agreement regarding the measurements was observed between the two methods. The average correlation between the CPMG-T2 values and SE-EPI-T2 values was moderate and positive, and the best correlations were found at b = 200 s/mm{sup 2} in the noncancer group (r = 0.557, P = 0.000) and at b = 100 s/mm{sup 2} in the cancer group (r = 0.537, P = 0.000). In addition, statistically significant differences were found between the noncancer and cancer groups in T2 values and ADC values (diff TEs) (P = 0.000). Conclusions: Substantial agreement in the measurements was found between the SE-EPI method and CPMG method. SE-EPI-based T2 mapping has potential clinical value for the prostate and can be considered an alternative to the traditional CPMG-T2 mapping method.
In this work, the Fe{sub 60}Pt{sub 40} nanoparticles were synthesized through the chemical reduction method by using the Fe(CO){sub 5} and the Pt(acac){sub 2} as the metallic precursor. The particle size of the synthesized FePt nanoparticles was controlled by adjusting the reaction conditions involving of the Fe(CO){sub 5}-injecting temperature and the soak time of reaction. The structure, morphology, and magnetic properties of the synthesized FePt nanoparticles were characterized by XRD, TEM, and vibrating sample magnetometer (VSM), respectively. The synthesized nanoparticles exhibit uniform size and good dispersity. The magnetization behaviors indicate that the nanoparticles present the core-shell magnetic structure including the ferromagnetic core part and the spin-disorder shell part. There exists a spin pinning effect of the shell part on the core part. The increase of particle size weakens the spin pinning effect.
Abstract The study of grain boundaries is the foundation to understanding many of the intrinsic physical properties of bulk metals. Here, the preparation of microscale thin‐film gold bicrystals, using rapid melt growth, is presented as a model system for studies of single grain boundaries. This material platform utilizes standard fabrication tools and supports the high‐yield growth of thousands of bicrystals per wafer, each containing a grain boundary with a unique <111> tilt character. The crystal growth dynamics of the gold grains in each bicrystal are mediated by platinum gradients, which originate from the gold–platinum seeds responsible for gold crystal nucleation. This crystallization mechanism leads to a decoupling between crystal nucleation and crystal growth, and it ensures that the grain boundaries form at the middle of the gold microstructures and possess a uniform distribution of misorientation angles. It is envisioned that these bicrystals will enable the systematic study of the electrical, optical, chemical, thermal, and mechanical properties of individual grain boundary types.
In this work, the structural and magnetic properties in ZnCr{sub 2−x}Ga{sub x}O{sub 4} were investigated. In ZnCr{sub 2−x}Ga{sub x}O{sub 4}, Ga{sup 3+} ions substitute partial Cr{sup 3+} ions and occupy the B sites. ZnCr{sub 2}O{sub 4} undergoes a paramagnetic-antiferromagnetic transition at 12 K. In ZnCr{sub 2−x}Ga{sub x}O{sub 4}, the antiferromagnetic short-range correlation occurs below 60 K above T{sub N}. The Ga{sup 3+} doping weakens the antiferromagnetic nearest-neighbor exchange interaction (J{sub 1}) and induces ferromagnetic next-nearest-neighbor exchange interaction (J{sub 2}) among the B site magnetic ions. The generation of the ferromagnetic J{sub 2} is ascribed to structure distortion induced by the Ga{sup 3+} doping.
Explore the source record for details and available documents.
We investigated the magnetic properties of a geometrically frustrated magnet of ZnFe{sub 2}O{sub 4} nanoparticles by carrying out the comprehensive measurements of dc magnetization and ac susceptibility. Spin glass is confirmed to occur in this weakly Fe(Zn)-ionic-inversed sample. The common characteristics of spin glass including the aging, the memory, and the rejuvenation effects were observed. By using the critical-power law to study the spin dynamics, the spin-glass transition temperature T{sub g} is obtained to be 18 K and the dynamic exponent zν is 8.0. The weak exchange interaction disorder introduced by the ferrimagnetic J{sub AB} interaction, together with the weak nonmagnetic dilute disorder induced by the ionic inversion, is responsible for the formation of spin glass in the ZnFe{sub 2}O{sub 4} nanoparticles.