Engineering Papers⌕ Search

Engineering topics

Byna, Suren

Publications and source records attributed to Byna, Suren.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Design and implementation of dynamic I/O control scheme for large scale distributed file systems

In this paper, we have analyzed the input/output (I/O) activities of Cori, which is a high-performance computing system at the National Energy Research Scientific Computing Center at Lawrence Berkeley National Laboratory. Our analysis results indicate that most users do not adjust storage configurations but rather use the default settings. In addition, owing to the interference from many applications running simultaneously, the performance varies based on the system status. To configure file systems autonomously in complex environments, we developed DCA-IO, a dynamic distributed file system configuration adjustment algorithm that utilizes the system log information to adjust storage configurations automatically. Our scheme aims to improve the application performance and avoid interference from other applications without user intervention. Moreover, DCA-IO uses the existing system logs and does not require code modifications, an additional library, or user intervention. To demonstrate the effectiveness of DCA-IO, we performed experiments using I/O kernels of real applications in both an isolated small-sized Lustre environment and Cori. Our experimental results shows that our scheme can improve the performance of HPC applications by up to 263% with the default Lustre configuration.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Real-time and post-hoc compression for data from Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) is an emerging sensing technology that records the strain-rate along fiber optic cables at high spatial and temporal resolution. This technique is becoming a popular tool in seismology, hydrology, and other subsurface monitoring applications. However, due to the large coverage (10’s of km) and high density of measurements (1m spacing at 100’s of Hz), a DAS installation could produce terabytes of data records per day. Because many DAS instruments are deployed in remote locations, this large data size poses significant challenges to its transfer and storage. In this paper, we explore lossless compression methods to reduce the storage requirement in both real-time and post-hoc scenarios. Here we propose a two-stage compression method to improve the compression ratio and compression speed. This two-stage compression method could reduce the storage requirement by 40%, which is 20% more than other lossless methods, such as ZSTD. We demonstrate that the compression method could complete its operation well before the DAS instrument needs to output the next file, making it suitable for real-time DAS acquisition. We also implement a parallel compression method for a post-hoc scenario and demonstrate that our method could effectively utilize a parallel computer. With 256 CPU cores, our parallel compression method achieves the speed of 26GB/second.

58 GEOSCIENCES↗
DOE OSTI2022

Access Patterns and Performance Behaviors of Multi-layer Supercomputer I/O Subsystems under Production Load

Scientific computing workloads at HPC facilities have been shifting from traditional numerical simulations to AI/ML applications for training and inference while processing and producing ever-increasing amounts of scientific data. To address the growing need for increased storage capacity, lower access latency, and higher bandwidth, emerging technologies such as non-volatile memory are integrated into supercomputer I/O subsystems. With these emerging trends, we need a better understanding of the multilayer supercomputer I/O systems and ways to use these subsystems efficiently. In this work, we study the I/O access patterns and performance characteristics of two representative supercomputer I/O subsystems. Through an extensive analysis of year-long I/O logs on each system, we report new observations in I/O reads and writes, unbalanced use of storage system layers, and new trends in user behaviors at the HPC I/O middleware stack.

Bez, JL↗
DOE OSTI2022

LBNL Superfacility Project Report

The Superfacility model is designed to leverage HPC for experimental science. It is more than simply a model of connected experiment, network, and HPC facilities; it encompasses the full ecosystem of infrastructure, software, tools, and expertise needed to make connected facilities easy to use. The three-year Lawrence Berkeley National Laboratory (LBNL) Superfacility project was initiated in 2019 to coordinate work being performed at LBNL to support this model, and to provide a coherent and comprehensive set of science requirements to drive existing and new work. A key component of the project was the in-depth engagements with eight science teams that represent challenging use cases across the DOE Office of Science.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Data Storage for HEP Experiments in the Era of High-Performance Computing

As particle physics experiments push their limits on both the energy and the intensity frontiers, the amount and complexity of the produced data are also expected to increase accordingly. With such large data volumes, next-generation efforts like the HL-LHC and DUNE will rely even more on both high-throughput (HTC) and high-performance (HPC) computing clusters. Full utilization of HPC resources requires scalable and efficient data-handling and I/O. For the last few decades, ROOT has been used by most HEP experiments to store data. However, other storage technologies like HDF5 may perform better in HPC environments. Initial explorations with HDF5 have begun using ATLAS, CMS and DUNE data; the DUNE experiment has also adopted HDF5 for its data-acquisition system. This paper presents the future outlook of the HEP computing and the role of HPC, and a summary of ongoing and future works to use HDF5 as a possible data storage technology for the HEP experiments to use in HPC environments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

PDC VOL Connector (PDCVOL) v0.1

PDCVOL is an extension software originated from the Proactive Data Containers (PDC) software (LBNL Track Code 2017-098), it is an HDF5 VOL connector that allows HDF5 applications to store and access data with the PDC system without the need to modify their code. The application can take advantage of the PDC optimization features and achieve better I/O performance.

Byna, Suren↗
DOE OSTI2022

Position Papers for the ASCR Workshop on the Management and Storage of Scientific Data

The purpose of this workshop is to identify priority research directions in the area of data management for high-performance and scientific computing above and beyond HPC’s traditional "the parallel file system is the data-management system" model. Supporting the breadth of the DOE mission, including the explosion of AI uses and the growing needs of experimental and observational science, motivates revisiting our assumptions about data management. There are many facets of this topic to explore including: (1) Interfaces for accessing data that resides on traditional persistent storage as well as memory devices; (2) Storage-system architecture design that supports scientific workflows on varied hierarchical storage and networking devices; (3) Devising metadata management infrastructure to support FAIR principles (Findability, Accessibility, Interoperability, and Reusability); (4) Capturing provenance information about scientific data; (5) Utilizing AI to learn I/O patterns of emerging workloads for efficient data management; (6) Providing data management support for AI and complex workflows; and (7) Understanding the overlap between traditional storage systems and I/O (SSIO) efforts and data management. While the program committee has identified these topics as important areas for discussion, we welcome position papers from the community that propose additional topics of interest for discussion at the workshop. The workshop agenda will include breakout sessions for discussing these and selected topic areas to inform priority research directions for data management for high-performance and scientific computing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Management and Storage of Scientific Data

Scientific discoveries rely heavily on efficient access, search, and management of massive data sets. Data management technologies have, for decades, provided foundational capabilities for scientific computing. Just as storage, input/output (I/O), and data management have been fundamental to simulation-based science for many years, so too are capable data-management technologies key to the success of today’s scientific workflows utilizing data intensive and machine learning (ML) techniques. The Department of Energy, Office of Science, Advanced Scientific Computing Research (ASCR) program has invested broadly in data-management research focused on high-performance computing (HPC) systems, from parallel file systems that store data to application software that makes these systems more productive. Still, advances in technology combined with growing diversity of supported science strongly motivate continued investment in this area. In January 2022, ASCR convened a workshop to identify priority research directions in the area of data management for high-performance and scientific computing. Attendees were challenged to identify promising approaches that would support the breadth of the DOE mission, including the explosion of artificial intelligence (AI) uses and the growing needs of experimental and observational science. Technological and science drivers were identified and considered as they relate to key aspects of data management such as interfaces, architectural design, and FAIR principles (Findable, Accessible, Interoperable, and Reusable). The thoughts of the workshop participants were distilled into a set of four priority research directions with the potential for high impact on DOE science. These research directions are summarized in the following pages.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Report for the ASCR Workshop on the Management and Storage of Scientific Data

The purpose of this workshop is to identify priority research directions in the area of data management for high-performance and scientific computing above and beyond HPC’s traditional "the parallel file system is the data-management system" model. Supporting the breadth of the DOE mission, including the explosion of AI uses and the growing needs of experimental and observational science, motivates revisiting our assumptions about data management. There are many facets of this topic to explore including: (1) Interfaces for accessing data that resides on traditional persistent storage as well as memory devices; (2) Storage-system architecture design that supports scientific workflows on varied hierarchical storage and networking devices; (3) Devising metadata management infrastructure to support FAIR principles (Findability, Accessibility, Interoperability, and Reusability); (4) Capturing provenance information about scientific data; (5) Utilizing AI to learn I/O patterns of emerging workloads for efficient data management; (6) Providing data management support for AI and complex workflows; and (7) Understanding the overlap between traditional storage systems and I/O (SSIO) efforts and data management. While the program committee has identified these topics as important areas for discussion, we welcome position papers from the community that propose additional topics of interest for discussion at the workshop. The workshop agenda will include breakout sessions for discussing these and selected topic areas to inform priority research directions for data management for high-performance and scientific computing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Deep Dive Topic: Analysis

This section focuses on analysis of I/O behavior and the feedback resulting from that analysis. We define analysis of I/O behavior as interpreting and deriving meaning from I/O instrumentation data. We define feedback as the product of the analysis process. Feedback can be thought of as the link between analysis and the subsequent response to that analysis, such as I/O tuning or policy decisions (see Section 4.4).Analysis and feedback may be consumed by either human stakeholders or machine algorithms. If it is to be consumed by human stakeholders, then the analysis process will likely emphasize understandable language and visualization techniques. If it is to be consumed by machine algorithms, then it will likely emphasize the use of machine-parsable, consistent formats that are suitable for ingestion by policy engines and data-mining tools.

Snyder, Shane↗
DOE OSTI2021

I/O Bottleneck Detection and Tuning: Connecting the Dots using Interactive Log Analysis

Using parallel file systems efficiently is a tricky problem due to inter-dependencies among multiple layers of I/O software, including high-level I/O libraries (HDF5, netCDF, etc.), MPI-IO, POSIX, and file systems (GPFS, Lustre, etc.). Profiling tools such as Darshan collect traces to help understand the I/O performance behavior. However, there are significant gaps in analyzing the collected traces and then applying tuning options offered by various layers of I/O software. Seeking to connect the dots between I/O bottleneck detection and tuning, we propose DXT Explorer, an interactive log analysis tool. In this paper, we present a case study using our interactive log analysis tool to identify and apply various I/O optimizations. We report an evaluation of performance improvement achieved for four I/O kernels extracted from science applications.

Bez, Jean Luca↗
DOE OSTI2021

Exploiting user activeness for data retention in HPC systems

HPC systems typically rely on the fixed-lifetime (FLT) data retention strategy, which only considers temporal locality of data accesses to parallel file systems. However, our extensive analysis based on the leadership-class HPC system traces suggests that the FLT approach often fails to capture the dynamics in users' behavior and leads to undesired data purge. In this study, we propose an activeness-based data retention (ActiveDR) solution, which advocates considering the data retention approach from a holistic activeness-based perspective. By evaluating the frequency and impact of users' activities, ActiveDR prioritizes the file purge process for inactive users and rewards active users with extended file lifetime on parallel storage. Our extensive evaluations based on the traces of the prior Titan supercomputer show that, when reaching the same purge target, ActiveDR achieves up to 37% file miss reduction as compared to the current FLT retention methodology.

Zhang, Wei↗
DOE OSTI2021

Characterizing Impacts of Storage Faults on HPC Applications: A methodology and insights

In recent years, the increasing complexity in scientific simulations and emerging demands for training heavy artificial intelligence models require massive and fast data accesses, which urges high-performance computing (HPC) platforms to equip with more advanced storage infrastructures such as solid-state disks (SSDs). While SSDs offer high-performance I/O, it remains unclear about the reliability challenges faced by the HPC applications under the SSD-related failures, in particular, failures resulting in data corruptions. The goal of this paper is to understand the impact of SSD-related data corruptions on the behaviors of complex HPC applications. To this end, we propose FFIS, a FUSE-based fault injection framework that systematically introduces storage faults into the application layer to model the errors originated from SSDs. FFIS is able to plant different I/O related faults into the data returned from underlying file systems, which also enables the investigation on the error resilience characteristics of the scientific file format for the first time. We demonstrate the use of FFIS with three representative real HPC applications, show how each application reacts to the data corruptions, and provide insights on the error resilience of the widely-adopted HDF5 file format for the HPC applications.

Fang, Bo↗
DOE OSTI2021

H5TurboPFor v0.0.1

H5TurboPFor is a wrapper for the TurboPFor-Integer-Compression for HDF5 library. Basically, it enables the HDF5 library to compress integer data using the TurboPFor.

Dong, Bin↗
DOE OSTI2021

DXT Explorer v0.1

DTX Explorer is a tool to generate interactive data visualizations of Darshan I/O traces collected from HPC applications. Its goal is to provide an easy and interactive way for researchers and developers to explore their application's I/O behavior and detect possible I/O bottlenecks that are impacting performance.

Bez, Jean Luca↗
DOE OSTI2021

Battle of the Defaults: Extracting Performance Characteristics of HDF5 under Production Load

Popular parallel I/O libraries, such as HDF5, provide tuning parameters to obtain superior performance. However, the selection of effective parameters on production systems is complex due to the interdependence of I/O software and file system layers. Hence, application developers typically use the default parameters and often experience poor I/O performance. This work conducts a benchmarking-based analysis on the HDF5 behaviors with a wide variety of I/O patterns to extract performance characteristics under the production workload. To make the analysis well controlled, we exercise I/O benchmarks on POSIX-IO, MPI-IO, and HDF5 using the same I/O patterns and in the same jobs. To address high performance variability in production environments, we repeat the benchmarks across I/O patterns, storage devices, and time intervals. Based on the results, we identified consistent HDF5 behaviors that appropriate configurations and operations on dataset layout and file-metadata placement can improve performance significantly. We apply our findings and evaluate the tuned I/O library on two supercomputers: Summit and Cori. The results show that our tuned parameters can achieve more than 10× I/O performance speedup than that with default parameters on both systems, suggesting the effectiveness, stability, and generality of our solution.

Xie, Bing↗