Engineering topics

Bussoletti, J. E.

Publications and source records attributed to Bussoletti, J. E..

8 records

NASA NTRS1992

TranAir: A full-potential, solution-adaptive, rectangular grid code for predicting subsonic, transonic, and supersonic flows about arbitrary configurations. User's manual

The TranAir computer program calculates transonic flow about arbitrary configurations at subsonic, transonic, and supersonic freestream Mach numbers. TranAir solves the nonlinear full potential equations subject to a variety of boundary conditions modeling wakes, inlets, exhausts, porous walls, and impermeable surfaces. Regions with different total temperature and pressure can be represented. The user's manual describes how to run the TranAir program and its graphical support programs.

Johnson, F. T.↗

NASA NTRS1987

TRANAIR - A computer code for transonic analyses of arbitrary configurations

Attention is given to a new approach to solving full potential equations about arbitrary configurations. Numerical algorithms from such fields as finite elements, preconditioned Krylov subspace methods, discrete Fourier analysis, and integral equations are combined to take advantage of the size and speed of current and emerging supercomputers. On the basis of this appraoch, a robust, efficient and easy to use computer code referred to as TRANAIR has been developed for transonic analysis of complex geometries.

Samant, S. S.↗

NASA NTRS1986

An exterior Poisson solver using fast direct methods and boundary integral equations with applications to nonlinear potential flow

A general method is developed combining fast direct methods and boundary integral equation methods to solve Poisson's equation on irregular exterior regions. The method requires O(N log N) operations where N is the number of grid points. Error estimates are given that hold for regions with corners and other boundary irregularities. Computational results are given in the context of computational aerodynamics for a two-dimensional lifting airfoil. Solutions of boundary integral equations for lifting and nonlifting aerodynamic configurations using preconditioned conjugate gradient are examined for varying degrees of thinness.

Young, D. P.↗

NASA NTRS1986

A new approach to the solution of boundary value problems involving complex configurations

A new approach for solving certain types of boundary value problems about complex configurations is presented. Numerical algorithms from such diverse fields as finite elements, preconditioned Krylov subspace methods, discrete Fourier analysis, and integral equations are combined to take advantage of the memory, speed and architecture of current and emerging supercomputers. Although the approach has application to many branches of computational physics, the present effort is concentrated in areas of Computational Fluid Dynamics (CFD) such as steady nonlinear aerodynamics, time harmonic unsteady aerodynamics, and aeroacoustics. The most significant attribute of the approach is that it can handle truly arbitrary boundary geometries and eliminates the difficult task of generating surface fitted grids.

Rubbert, P. E.↗

NASA NTRS1985

A transonic rectangular grid embedded panel method

In this chapter, a description is given of a nonstandard method which has the ultimate goal to provide a routine solution of transonic flow problems about large, complex configurations. For a number of reasons, it is difficult to extend standard methods to the solution of flows about complicated configurations. According to the particular approach of the considered nonstandard method, in the process of solving for linear potential flow via panel methods, a flow everwhere in space is created, taking into account the interior of the aircraft as well as the external flowfield of interest. Attention is given to the solution of flow problems without interior boundaries, the treatment of interior boundaries, and areas of current and future research.

Johnson, F. T.↗

NASA NTRS1983

Specification for a Program for an Interative Aeroelastic Solution (PIAS)

An engineering and software specification which was written for a computer program to calculate aeroelastic structural loads including the effects of nonlinear aerodynamics is presented. The procedure used in the program for an iterative aeroelastic solution (PIAS) is to alternately execute two computer codes: one to calculate aerodynamic loads for a specific wing shape, and another to calculate the deflected shape caused by this loading. A significant advantage to the design of PIAS is that the initial aerodynamic module can be replaced with others. The leading edge vortex (LEV) program is used as the aerodynamic module in PIAS. This provides the capability to calculate aeroelastic loads, including the effects of a separation induced leading edge vortex. The finite element method available in ATLAS Integrated structural analysis and design system is used to determine the deflected wing shape for the applied aerodynamics and inertia loads. The data management capabilities in ATLAS are used by the execution control monitor (ECM) of PIAS to control the solution process.

Manro, M. E.↗

NASA NTRS1982

A transonic rectangular grid embedded panel method

A method is presented that has the potential for solving transonic flow problems about the same complex aircraft configurations currently being analyzed by subsonic panel methods. This method does not require the generation of surface fitted grids. Instead it uses rectangular grids and subgrids together with embedded surface panels on which boundary conditions are imposed. Both the Euler and full potential equations are considered. The method of least squares is used to reduce the solution of these equations to the solution of a sequence of Poisson problems. The Poisson problems are solved using fast Fourier transforms and panel influence coefficient techniques. The overall method is still in its infancy but some two dimensional results are shown illustrating various key features.

Johnson, F. T.↗

NASA NTRS1981

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 4: Maintenance document (version 1.1)

The Maintenance Document is a guide to the PAN AIR software system, a system which computes the subsonic or supersonic linear potential flow about a body of nearly arbitrary shape, using a higher order panel method. The document describes the over-all system and each program module of the system. Sufficient detail is given for program maintenance, updating and modification. It is assumed that the reader is familiar with programming and CDC (Control Data Corporation) computer systems. The PAN AIR system was written in FORTRAN 4 language except for a few COMPASS language subroutines which exist in the PAN AIR library. Structured programming techniques were used to provide code documentation and maintainability. The operating systems accommodated are NOS 1.2, NOS/BE and SCOPE 2.1.3 on the CDC 6600, 7600 and Cyber 175 computing systems. The system is comprised of a data management system, a program library, an execution control module and nine separate FORTRAN technical modules. Each module calculates part of the posed PAN AIR problem. The data base manager is used to communicate between modules and within modules. The technical modules must be run in a prescribed fashion for each PAN AIR problem. In order to ease the problem of supplying the many JCL cards required to execute the modules, a separate module called MEC (Module Execution Control) was created to automatically supply most of the JCL cards. In addition to the MEC generated JCL, there is an additional set of user supplied JCL cards to initiate the JCL sequence stored on the system.

Baruah, P. K.↗