Engineering Papers⌕ Search

Engineering topics

Bushnell, D. M.

Publications and source records attributed to Bushnell, D. M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Halophytes, Algae, and Bacteria Food and Fuel Feedstocks

The constant, increasing demand for energy, freshwater, and food stresses our ability to meet these demands within reasonable cost and impact on climate while sustaining quality of life. This environmental Triangle of Conflicts between energy, food, and water--while provoked by anthropogenic monetary and power struggles--can be resolved through an anthropogenic paradigm shift in how we produce and use energy, water, and food. With world population (6.6 billion) projected to increase 40 percent in 40 to 60 yr, proper development of saline agriculture and aquaculture is required, as 43 percent of the Earth's landmass is arid or semi-arid and 97 percent of the Earth's water is seawater. In light of this, we seek fuel alternatives in plants that thrive in brackish and saltwater with the ability to survive in arid lands. The development and application of these plants (halophytes) become the primary focus. Herein we introduce some not-so-familiar halophytes and present a few of their benefits, cite a few research projects (including some on the alternatives algae and bacteria), and then set theoretical limits on biomass production followed by projections in terms of world energy demands. Based on diverse arid lands with a total size equivalent to the Sahara Desert (8.6(exp 8) ha, or 2.1(exp 9) acres), these projections show that halophyte agriculture and algae systems can provide for the projected world energy demand.

Hendricks, R. C.↗
NASA NTRS2009

Synthetic and Biomass Alternate Fueling in Aviation

While transportation fueling can accommodate a broad range of alternate fuels, aviation fueling needs are specific, such as the fuel not freezing at altitude or become too viscous to flow properly or of low bulk energy density that shortens range. The fuel must also be compatible with legacy aircraft, some of which are more than 50 years old. Worldwide, the aviation industry alone uses some 85-95 billion gallons of hydrocarbon-based fossil fuel each year, which is about 10% of the transportation industry. US civil aviation alone consumes nearly 14 billion gallons. The enormity of the problem becomes overwhelming, and the aviation industry is taking alternate fueling issues very seriously. Biofuels (algae, cyanobacteria, halophytes, weeds that use wastelands, wastewater and seatwater), when properly sourced, have the capacity to be drop-in fuel replacements for petroleum fuels. As such, biojet from such sources solves the aviation CO2 emissions issue without the downsides of 'conventional' biofuels, such as competing with food and fresh water resources. Of the many current fundamental problems, the major biofuel problem is cost. Both research and development and creative engineering are required to reduce these biofuels costs. Research is also ongoing in several 'improvement' areas including refining/processing and biologics with greater disease resistance, greater bio-oil productivity, reduced water/nutrient requirements, etc. The authors' current research is aimed at aiding industry efforts in several areas. They are considering different modeling approaches, growth media and refining approaches, different biologic feedstocks, methods of sequestering carbon in the processes, fuel certification for aviation use and, overall, ensuring that biofuels are feasible from all aspects - operability, capacity, carbon cycle and financial. The authors are also providing common discussion grounds/opportunities for the various parties, disciplines and concerned organization to share both issues and potential ways for moving forward, and overall, trying to educate those concerned about the innate limitations of 'conventional' biofuels and the solutions provided by non-traditional feedstocks that used waste lands/water or saline/salt water have an immense capacity potential.

Hendricks, R. C.↗
NASA NTRS2003

Aircraft Drag Reduction-A Review

The paper summarizes the state of the art in aeronautical drag reduction across the speed range for the conventional drag components of viscous drag, drag due to lift and wave drag. It also describes several emerging drag-reduction approaches that are either active or reactive/interactive and the drag reduction potentially available from synergistic combinations of advanced configuration aerodynamics, viscous drag-reduction approaches, revolutionary structural concepts and propulsion integration.

Bushnell, D. M.↗
NASA NTRS1992

Longitudinal vortex control - Techniques and applications (The 32nd Lanchester Lecture)

A summary is presented of vortex control applications and current techniques for the control of longitudinal vortices produced by bodies, leading edges, tips and intersections. Vortex control has up till now been performed by many approaches in an empirical fashion, assisted by the essentially inviscid nature of much of longitudinal vortex behavior. Attention is given to Reynolds number sensitivities, vortex breakdown and interactions, vortex control on highly swept wings, and vortex control in juncture flows.

Bushnell, D. M.↗
NASA NTRS1992

Comment on: The current status of turbulence modeling in CFD and its future prospects

Information is given in viewgraph form on computational fluid dynamics (CFD). Topics covered include the fundamental problem with conventional turbulence modeling, the fundamental problems with the state-of-the-art turbulence modeling approach of 'eddy viscosity', major problems with Reynolds stress equation (RSE) closures, RSE challenges that are probably addressable within the context of Reynolds averaging, RSE challenges which may require theoretical/numerical spectral adjuncts for satisfactory solutions, tools available to aid RSE modeling, and a simplex view of the status of turbulence modeling.

Bushnell, D. M.↗
NASA NTRS1992

Supersonic laminar flow control

A development status evaluation is presented for the theoretical understanding and design conceptualization of boundary layer control (BLC) systems applicable to supersonic transports, such as the currently envisioned NASA High Speed Civil Transport. By reducing fuel burned, supersonic BLC techniques could expand ranges to Pacific-crossing scales, while lowering sonic boom effects and upper-atmosphere pollution and even reducing skin friction temperature. The critical consideration for supersonic BLC is the presence of wave effects.

Bushnell, D. M.↗
NASA NTRS1991

Turbulence modeling in aerodynamic shear flows - Status and problems

This paper briefly summarizes the status and problems of turbulence modeling for aerodynamical applications. For complex flows the 'approach of choice' is (increasingly) full second-order (Reynolds stress equation) closure. These closures have not yet developed to anywhere near their full potential, significant further research is required especially regarding length-scale equations, representation of pressure-strain correlations, and wall region treatments. Recent developments in computer capability, algorithms, numerical simulations, theory and quantitative flow visualization should assist in and hasten this research. Several problem areas such as shock interaction and discrete dynamic instabilities of turbulent flows may require mega-to-large eddy simulation or theoretical adjuncts.

Bushnell, D. M.↗
NASA NTRS1991

Drag reduction in nature

Recent studies on the drag-reducing shapes, structures, and behaviors of swimming and flying animals are reviewed, with an emphasis on potential analogs in vehicle design. Consideration is given to form drag reduction (turbulent flow, vortex generation, mass transfer, and adaptations for body-intersection regions), skin-friction drag reduction (polymers, surfactants, and bubbles as surface 'additives'), reduction of the drag due to lift, drag-reduction studies on porpoises, and drag-reducing animal behavior (e.g., leaping out of the water by porpoises). The need for further research is stressed.

Bushnell, D. M.↗
NASA NTRS1991

High-Reynolds-number test requirements in low-speed aerodynamics

Research requirements to an ultra-high-Reynolds-number liquid helium facility are reviewed. Aerodynamic research areas under consideration include wave vortex hazard reduction, vortex control and diagnostics for maneuvering fighter aircraft, and performance of high-lift devices.

Bushnell, D. M.↗
NASA NTRS1990

Boundary layer transition in hypersonic flows

This paper summarizes some of the recent progress made at NASA Langley Research Center in the understanding, prediction and modeling of high speed boundary-layer transition. Linear and nonlinear theories together with large-eddy and direct numerical simulations have been used to understand various aspects of the transition problem while low disturbance 'quiet' tunnels provide means for validating the theoretical results.

Malik, M. R.↗
NASA NTRS1990

Control of submersible vortex flows

Vortex flows produced by submersibles typically unfavorably influence key figures of merit such as acoustic and nonacoustic stealth, control effectiveness/maneuverability, and propulsor efficiency/body drag. Sources of such organized, primarily longitudinal, vorticity include the basic body (nose and sides) and appendages (both base/intersection and tip regions) such as the fairwater, dive planes, rear control surfaces, and propulsor stators/tips. Two fundamentally different vortex control approaches are available: (1) deintensification of the amplitude and/or organization of the vortex during its initiation process; and (2) downstream vortex disablement. Vortex control techniques applicable to the initiation region (deintensification approach) include transverse pressure gradient minimization via altered body cross section, appendage dillets, fillets, and sweep, and various appendage tip and spanload treatment along with the use of active controls to minimize control surface size and motions. Vortex disablement can be accomplished either via use of control vortices (which can also be used to steer the vortices off-board), direct unwinding, inducement of vortex bursting, or segmentation/tailoring for enhanced dissipation. Submersible-applicable vortex control technology is also included derived from various aeronautical applications such as mitigation of the wing wake vortex hazard and flight aircraft maneuverability at high angle of attack as well as the status of vortex effects upon, and mitigation of, nonlinear control forces on submersibles. Specific suggestions for submersible-applicable vortex control techniques are presented.

Bushnell, D. M.↗
NASA NTRS1990

Aeronautical facility requirements into the 2,000's

This paper delineates and speculates upon aeronautical systems, trends, and requirements into the 2,000's and indicates ground facility capability enhancements which are needed to support these devlopments. New facility capabilities required include (1) higher Reynolds number at low speeds especially for the high-lift and vortex hazard problems, (2) low-disturbance, high-speed aerodynamic and hypersonic propulsion facilities for transition and mixing studies, (3) large-scale and relatively long test-time hypersonic propulsion tunnels to allow multidisciplinary integration, (4) a large-scale, high-speed acoustics facility for en route noise minimization, (5) a large-scale ballistic range for planetary entry studies, and (6) development of advanced (full simultaneous 3-space and time) nonintrusive instrumentation for CFD transition/turbulence modeling/code validation and interacting flow physics determination.

Beach, H. L., Jr.↗
NASA NTRS1990

Supersonic aircraft drag reduction

This paper reviews aerodynamic drag reduction for friction, wave and vortex drag associated with supersonic cruise aircraft and suggests approaches and research directions. Suction laminar flow control may also enable improved low-speed, high-lift systems, improved lift-to-drag ratio for subsonic cruise, reduced parasitic viscous drag for favorable interference wave drag reduction approaches, and turbulent skin friction reduction via slot injection. Flow separation control at cruise proffers opportunities for increased leading-edge thrust, increased lift increment from upper surface, increased fuselage lift/camber for wave drag-due-to-lift reduction, improved performance of various favorable interference wave drag reduction schemes, as well as possibly better low-speed, high-lift systems and wing cruise performance.

Bushnell, D. M.↗
NASA NTRS1990

Investigation of several passive and active methods for turbulent flow separation control

Relative performance of several passive and active methods for controlling two-dimensional turbulent separated flow associated with a curved backward-facing ramp were investigated at low speeds. Surface static pressure measurement and oil flow visualization results indicate that submerged vortex generators, vortex generator jets, elongated arches at +-alpha, and large-eddy breakup devices at +-alpha placed near the baseline separation location reduce flow separation and increase pressure recovery. Spanwise cylinders reduce flow separation but decrease pressure recovery downstream. Arches with alpha = 0 deg, Helmholtz resonators, and Viets' fluidic flappers examined so far have no significant effect in reducing separation. Wall cooling computation indicates that separation delay on a partially cooled ramp is nearly the same as on a fully-cooled ramp while minimizing the frictional drag increase associated with the wall cooling process.

Lin, J. C.↗
NASA NTRS1988

Transition prediction in external flows via linear stability theory

Linear stability theory results are presented for flight and low-disturbance wind tunnels, at low and high speeds, and for T-S, Gortler, and cross-flow modes. Results show that, in the absence of Morkovin 'bypasses', transition at low background disturbance levels corresponds to N-factors of the order of 9 to 11, provided that phenomena such as curvature effects are included. The results point to a wider range of applicability for the e exp N method than previously conjectured, and suggest that the e exp N method can be used to parametrize transition predictions as a function of parameters which affect the mean flow profiles for such purposes as LFC and minimum drag design.

Bushnell, D. M.↗
NASA NTRS1987

A mixing augmentation technique for hypervelocity scramjets

The paper discusses mixing problems in hypervelocity scramjet combustors. Techniques for providing turbulence and/or mixing enhancement are described. One such technique, the oscillating shock interaction, is studied numerically and options for producing oscillatory shock waves for mixing augmentation in scramjet combustors are discussed.

Kumar, A.↗
NASA NTRS1987

Application of stability theory to laminar flow control - Progress and requirements

Paper briefly summarizes the current status of linear stability theory as applied to laminar flow control for aerodynamics. Results indicate that the conventional 'N factor' method of correlating stability theory and transition has a broad application range, including low- and high-speeds, two- and three-dimensional mean flow and TS, Gortler and crossflow disturbance modes. Linear theory is particularly applicable to the laminar flow control problem as, for system efficiency, control must be exercised and disturbances maintained in the linear regime. Current areas of concern for LFC, which require further stability theory research, include TS-crossflow interaction, combined disturbance fields (roughness, waviness, noise) and suction-induced disturbances. Some results on wave-interactions are presented.

Bushnell, D. M.↗