Engineering Papers⌕ Search

Engineering topics

Burkes, D E

Publications and source records attributed to Burkes, D E.

Effect of Dysprosia Additive on the Consolidation of CeO2 by Spark Plasma Sintering

The influence of dysprosia addition on the sintering and resulting microstructure of nano-grained CeO2 ceramics was investigated as functions of the spark plasma sintering (SPS) parameters. The addition of Dy2O3 (forming a solid solution) resulted in an increase in relative density and a decrease in grain size. The relative density of samples with Dy2O3 content of 6 and 10 mol% was over 95% when sintered at 1050 C under 500 MPa for holding times as short as 5 minutes. The application of high pressure facilitated the consolidation to relatively high densities with minimal grain growth. Heating rate and holding time, however, had insignificant effect on density but a measurable effect on grain size.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermophysical Properties of U-10MO Alloy

This report provides an overview of thermophysical properties of unirradiated uranium alloyed with ten weight percent molybdenum (U 10Mo), with particular focus on those material properties needed for modeling of new fuels for HPRRs (High Performance Research Reactors). The report contains both historical data available in the literature on U-10Mo, as well as more recent results conducted by the Global Threat Reduction Initiative fuel development program. The main use of the report is intended as a standard U-10Mo alloy properties reference for reactor models and simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Metallic Fuels for Advanced Reactors

In the framework of the Generation IV Sodium Fast Reactor Program the Advanced Fuel Project has conducted an evaluation of the available fuel systems supporting future sodiumcooled fast reactors. This paper presents an evaluation of metallic alloy fuels. Fast reactor development programs have been conducted over the past five decades. Early U.S. fast reactor developers originally favored metal alloy fuel due to its high fissile density and compatibility with sodium. As metal alloy fuels continued to be developed it was discovered that low smear density allowed for the fuel to operate to much higher burnup. The goal of fuel development programs for future fast reactors is to develop and qualify for operation, a nuclear fuel system that performs all of the functions of a conventional fast spectrum nuclear fuel while destroying recycled actinides. This fuel would provide a mechanism for closure of the nuclear fuel cycle. Metal fuels are candidates under consideration for this application, based on documented performance of metallic fast reactor fuels and the early results of fuel tests currently being conducted in U.S. and international transmutation fuel development programs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗